With those results, they may be able to do 9-10-9 @ 2133 ... ?
With those results, they may be able to do 9-10-9 @ 2133 ... ?
Samsung doesn't pass 1960mhz w/ stability no matter what timming and voltage used but it does 1960mhz 9-9-9-27 1T w/ only 1,47v
I will try higher trc on them also later, but trc and voltage are definately the key combination for Crucials.
currently testing 2145Mhz 9-9-9-24-47 2T w/ 1,64v
Edit: put the samsung back just to be sure I wasn't doing something stupid with them, but no 1960MHz 9-9-9-27 seems to be it stability wall, 1T doen't make any diference neighter voltage. It can reach it maximum performance at 1,50-1,55V
Crucial looks like a tipical micron/winbond memory, low timmings, high trc, lots of voltage (now we are talking about 1,70v and not 3,4 - 2,6 or 2.2V anymore, but scalability in 4GB sticks w/ more than 1,60v seems rare nowadays.)
Definately a keeper .
30min at 2145Mhz 9-9-9 1,62V I could never reach that before.
Last edited by Barr3l Rid3r; 02-02-2012 at 01:30 PM.
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
good to know they are double sided, crucial should update its site...
p.s. don't think they will put Hypers to dust, bulldozer is more than capable to run hypers at high clock.
Hmmm maybe I'll try again with 2T...
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
well, not here and I haven't heard of anyone who could put them stable over 2050Mhz 7-7-7 on FX setup
But I'm talking about 8GB (4x Sticks) w/ 2x sticks they outperform any other I've tested but maybe only for benchmarks. I wanted to go 8GB and hypers aren't stable at bench settings as this may be:
Wtf is that? I've never see any memory with thermal sensors.
Last edited by Barr3l Rid3r; 02-02-2012 at 04:32 PM.
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Barr3l are this ones your modules? [ http://www.crucial.com/store/partspe...4G3D1869DE1TX0 ]. It says on product details there that they have thermal sensor. Kinda cool. Ordered one of those, will have to wait a while. In the meantime will be trying some dominators gt 2133 1.5v they look promising..
Last edited by FedericoUY; 02-02-2012 at 06:16 PM.
For anyone with the LED's or thermal sensors, you can use the Ballistix MOD utility to change LED color, frequency, disable, and also monitor temps on many of the new kits too.
Here it is for anyone that needs it
http://www.crucial.com/ballistix/bl-mod-utility.aspx
~ <Mushkin Enhanced Alpha Team ~
GIGABYTE Reviews - X58A-OC ~ P67A-UD7 ~ P67A-UD4 ~ 5870 SOC
<Mushkin Reviews - 998966 Radioactive ~ 998826 Ridgeback ~ 998679 Blackline
Crucial Reviews - C300 SSD ~ Blue Tacer DDR3
My 2500K IMC doesnt like 8GB. With 4x2GB PSCs best it could do is 1866 8-9-8, and my 2x4GB 1600 Smart Tracers did the exact same. So all I can say right now is that mine can run 1866 8-9-8 with sub 1.6V (1600 8-8-8 1.5V stock kit). Going to try them with my new i3-2100, but doubt the IMC on that would be any better.
Heatware Cecil
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
I must confess, I was really pissed w/ this memory cause UPS charged US$170 only for customs fees/duty, that for 2x sets of those. After I've paid twice price for it, I sticked them and they seemed worse than my samsungs... I was almost thashing them, but after some TRC adjust and 2T command rate it seems to fly
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
That's nice result. Have you tried loosening trcd and how big is the effect in MHz?
Would be interesting to see what these can do at 9-10-92-7/9-11-9-27, which most 4GB sticks use for 2000+ clocks
X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Newegg sent me the wrong color, and no longer has the orange/blue ones I wanted. Was going to get a refund for them and get the taller heatspreader ones, but...
Crucial is an awsome company! Instead of RMAing with newegg, I called them to see if they would exchange them. They are cross shipping me a set of 1866 OBs for my 1600 RGs, and not charge anything, no shipping charges either way, and I get to keep my fan since I wont be RMAing with newegg.
Last edited by Cecil; 02-03-2012 at 10:56 AM.
Heatware Cecil
No good crashes Prime95 9-9-9-27 2T even at 1.65v...I'm sticking to my Sammys and ebaying these for sure.
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
Seems like you got a bad kit, try an RMA.
Heatware Cecil
barrel, looks nice! any AIDA shot?
Vishera 8320@ 5ghz | Gigabyte UD3 | 8gb TridentX 2400 c10| Powercolor 6850 | Thermalight Silver Arrow (bench Super KAZE 3k) | Samsung 830 128gbx2 Raid 0| Fractal case
Barr3l Rid3r
what exactly memory model? what ICs?
Barr3l's are elite modules, and IC nobody knows for sure, all they know is that they are Micron's because of how they behave. Cheers.
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
The duel Samys vs Crucials
I'm loving them, Samsung tryed to catch up with them after beeing passed, and actually made it with a really good mark at 2440Mhz 11-11-11 w/ only 1,55V and it was very stable at that clock, enough for spi 32mb and stuff.
But, then my NB is around 2600Mhz and it's not daily stable w/ that settings and fully loaded cores. CPU-NB divider don't work at 9X or lower with high clocks , so full stability was not an option.
I have to move it to around 2300mhz to make it stable at less than 1,52V but it can't do that w/ cas lower than 11-11-11 so Crucial at 2200Mhz 9-9-9 are probably better.
At 2200 sammys can't match Crucial timmings also..
Conclusion, Sammys for higher than 2300 stable and optimezed systems, Crucials for anything below 2250Mhz
Last edited by Barr3l Rid3r; 02-09-2012 at 03:00 PM.
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
CL10 didnt scale on the Crucial?
Why only 1.52v?
Smile
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Wow, they rock! Is it 2T, right?
Last edited by Punisher!; 02-12-2012 at 04:18 AM.
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
yep couldn't get them to do any impressive result w/ 1T, anyway difference in performance comparig 1T vs 2T at 2000Mhz is very small in read performance and all the rest are about the same.
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Bookmarks