Results 1 to 1 of 1

Thread: Project: There Was A Budget At Some Point (56K Warning)

  1. #1
    Xtreme Member
    Join Date
    Jun 2008
    Location
    Winter Springs, FL
    Posts
    278

    Project: There Was A Budget At Some Point (56K Warning)

    This isn't so much of a worklog because I didn't take many pictures during the "build process", mostly just after pics, but it might help someone trying to squeeze as many things inside a NZXT Vulcan as they can

    I doubt anyone around here remembers my original buildlog from the days of Koolance being a bad word around here :P This is my first venture back into this world (and one of the first times I've posted in about 2 years, lmao).

    Now to the actual log. I started this build as a sort of budget gaming computer, slowly adding pieces as I went along. Somewhere in there I forgot what "budget" meant, lmao. So now I have everything in there except the kitchen sink.

    Computer Parts List:

    Asus Maximus IV Gene-Z [$165]
    Intel i5-2500K (4.5GHz) [$215]
    G.Skill Ripjaws 4x4GB DDR3-1600 [$95]
    AMD Radeon HD 5970 (stock for now, gonna OC for benches) [$300]
    AOC 2436vw [$310]
    OCZ Vertex 3 60GB (RAID 0) - x2 [$210]
    WD VelociRaptor 300GB (RMA from original build, huzzah 5 year warranty) [$0]
    Asus Xonar Essence STX [$140]
    Beyerdynamic DT770 250 Ohm Headphones [$190]
    NZXT Vulcan [$70]
    NZXT Fan Controller [$25]
    NZXT LED Strip [$20]
    Rosewill HIVE 750W [$70]
    Razer Blackwidow Ultimate Battlefield 3 Edition [$130]
    Razer Diamondback 3G [$0]
    6" SATA Cables (don't remember brand) - x3 [$10]
    MDPC Sleeving [$70]
    Sleeving Tools [$40]

    TOTAL: ~$2000 shipped

    Cooling Parts List:

    EK Supreme HF Acetal [$70]
    EK FC-5970 Nickel + Acetal [$70] (Microcenter brand new, winning!)
    XSPC 450 Pump/res [$50]
    XSPC EX240 [$50]
    Black Ice GTX Xtreme M92 [$60]
    Black Ice GTX Xtreme 120 [$60]
    Noctua NF-P12 - x2 [$40]
    Scythe Kama Flow 2 92MM - 1700RPM (reduced to 1000 with Noctua ULNA) [$15]
    NZXT 120MM Orange LED (included with case) - x2 [$0]
    NZXT 200MM Side Fan (actually 190MM, only works with NZXT cases) [$20]
    Primochill Primoflex 1/2" ID - Black - 10ft [$25]
    Bitspower 1/2" ID Fittings - Matte Black - x8 [$30]
    Bitspower 1/2" ID Right Angle Fittings - Matte Black - x4 [$50] (Seriously?)
    Primochill 3/4" OD Clamps - 10 Orange + 2 Black [$15]

    TOTAL: ~$575 shipped (that would've gotten me about halfway done with Koolance, rofl)
    TOTAL TOTAL: ~$2600 shipped

    Pictures (in order of me taking them):

    My first sleeve (too much work, lol)



    The sleeve in before the budget went entirely out the window.




    Once I got the SATA power cable sleeved and crammed all those 6" SATA cables in there.






    With the side panel on.



    Molex's PSU-side 6-pin sleeved (badly, lmao).



    Molex sleeved (not as badly, lol).




    Looks much nicer.




    Original plan (the MOSFET I ordered was wrong not that it would've fit in there anyways, rofl).



    Updated plan (almost what I have now, minus MOSFET)



    Finished (I'm going to borrow a friend's DSLR to get better quality pictures)







    Someone complained about my 24-pin and 8-pin so I had to sleeve them (was going to, just takes soooooooo long, lol).




    ALMOST FORGOT!!!

    Temps:

    CPU Idle: 40C
    CPU Prime95: 60C

    GPU Idle: 36C
    GPU Furmark: 40C

    That just about sums it up. If you have any questions, comments, concerns, etc. feel free to post them Thanks for looking!
    Last edited by The Jesus; 01-12-2012 at 02:55 AM.
    Why yes, yes I do use Koolance..*Flame Wall Inbound*

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •