Hello guys
I used a Noctua U12P with my P5K for 3 years until 2 months ago.
The problem is, I can't remove the backplate from my mother board and I don't know how to proceed without damaging it.
Any tips ?
Hello guys
I used a Noctua U12P with my P5K for 3 years until 2 months ago.
The problem is, I can't remove the backplate from my mother board and I don't know how to proceed without damaging it.
Any tips ?
2500K, 6970, Acer 245HQ
E8400@3.85 + Vdroop P5K
Nobody ?
2500K, 6970, Acer 245HQ
E8400@3.85 + Vdroop P5K
Try some heat. Heat gun, or hair dryer.
Sandy Bridge 2500k @ 4.5ghz 1.28v | MSI p67a-gd65 B3 Mobo | Samsung ddr3 8gb |
Swiftech apogee drive II | Coolgate 120| GTX660ti w/heat killer gpu x| Seasonic x650 PSU
QX9650 @ 4ghz | P5K-E/WIFI-AP Mobo | Hyperx ddr2 1066 4gb | EVGA GTX560ti 448 core FTW @ 900mhz | OCZ 700w Modular PSU |
DD MC-TDX CPU block | DD Maze5 GPU block | Black Ice Xtreme II 240 Rad | Laing D5 Pump
Oven can work too ?
The problem is with the screw, I'm afraid to break the mobo
2500K, 6970, Acer 245HQ
E8400@3.85 + Vdroop P5K
What screw? Have you dismounted the cooler? Then the backplate is stuck only because of the adhesion. Try heatgun or hair dryer to heat it up and take it out. Be careful not to go too close.
I mean screw driver not screw* (stupid english) There is no more screw on the motherboard
I'm gonna try it tonight thx
2500K, 6970, Acer 245HQ
E8400@3.85 + Vdroop P5K
Backplate removed, ty for the help
2500K, 6970, Acer 245HQ
E8400@3.85 + Vdroop P5K
Posting Permissions
Reply With Quote
Bookmarks