Ultra low profile 1.35v 30nm DDR3 capable of 2400MHz. Perfect for SFF builds.

[andressergio]

Why the attitude? Why do internet forums always have to do with proving someone wrong at all costs

Geil EVO Corsa were thought to be 9-10-9, but actually were 9-11-9 correct. However, the 9-11-9 kit is labeled "ADC" and the REAL 9-10-9 kit is labeled DC. The DC kit came later and is not listed on GEIL's website, which rarely gets updated.

I'm not stupid, both kits are listed on newegg and the 9-10-9 kit is really 9-10-9, also pricier.

I'll hunt up screenshots when I have the time, later.

@andressergio
These are the best kits if you want to do 2133 10-10-10 at cheap prices, however there are kits that will do 9-10-9 around $80 too. These don't have heatspreaders as well...so they are the best low height modules. Team LV series is rated 2133 10-10-10 for $80 with a beefy HS for those that want better cooling...

thanks beep

i already have enough mem lol i was hoping to do 2400 but as guys said impossible with 2600k

[Counter CS]

Are those Kingston same ICs ?

http://www.gearxs.com/gearxs/product...ducts_id=15806



General Features:
4 GB DDR3 (Double Data Rate Three) RAM
PC3-10600
1333 MHz
CL9
1.5V
2Rx8
512M x 64-bit
Non-ECC
Unbuffered
Memory timings: 9-9-9
240-pin
Pb-free (lead-free)

[PiLsY]

1.5v so I very much doubt it.

[Punisher!]

1.5v so I very much doubt it.

Same here.

[TEDY]

any updates how to buy in europe?

[Punisher!]

any updates how to buy in europe?

I haven't seen any EU shop having it available yet.

[Punisher!]

I'll get them by the end of the week according to tracking (still in UK, UK - Italy now).

In the meantime I have reached the perfect configuration to test them:
http://digilander.libero.it/m4puni/p..._TeamG_1bs.jpg

Max RAM divider will push them to 2133Mhz!

[Kristoferr]

My 16GB of M378B5273DH0-CH9 arrived today from Germany.
First try 1.55v 2133 9-10-10-29-1T
Thats one nice ram!
Cost me total of 99€. not bad.
Did not do 9-10-9 @ 1.6v. Didnt want to push voltage any further. Im very happy with 2133 9-10-10.

[Punisher!]

Very nice result mate! Keep pushing it but 2133 9-10-10-29-1T is already so great!

My 16GB of M378B5273DH0-CH9 arrived today from Germany.
First try 1.55v 2133 9-10-10-29-1T
Thats one nice ram!

Did not do 9-10-9 @ 1.6v. Didnt want to push voltage any further. Im very happy with 2133 9-10-10.

[Kristoferr]

Thanx Punisher.

Tried up to 1.65v and 2200mhz cl10. Doesnt really like anything above 100bclk and 2133.
Maybe its just me and my P67 deluxe, but looks like the sweetspot is 2133 9-10-10-1T and 1.55v
Stability test running just now. 1.55v seems to be enought for this.

[andressergio]

Thanx Punisher.

Tried up to 1.65v and 2200mhz cl10. Doesnt really like anything above 100bclk and 2133.
Maybe its just me and my P67 deluxe, but looks like the sweetspot is 2133 9-10-10-1T and 1.55v
Stability test running just now. 1.55v seems to be enought for this.

yeah its what i tested mate on P67 you will get 2133

[Punisher!]

Please post your stability test as soon as you complete it!

Thanx Punisher.

Tried up to 1.65v and 2200mhz cl10. Doesnt really like anything above 100bclk and 2133.
Maybe its just me and my P67 deluxe, but looks like the sweetspot is 2133 9-10-10-1T and 1.55v
Stability test running just now. 1.55v seems to be enought for this.

[andressergio]

Thanx Punisher.

Tried up to 1.65v and 2200mhz cl10. Doesnt really like anything above 100bclk and 2133.
Maybe its just me and my P67 deluxe, but looks like the sweetspot is 2133 9-10-10-1T and 1.55v
Stability test running just now. 1.55v seems to be enought for this.

yeah its what i tested mate on P67 you will get 2133

[andressergio]

My 16GB of M378B5273DH0-CH9 arrived today from Germany.
First try 1.55v 2133 9-10-10-29-1T
Thats one nice ram!
Cost me total of 99€. not bad.
Did not do 9-10-9 @ 1.6v. Didnt want to push voltage any further. Im very happy with 2133 9-10-10.

kristoferr and this ram will last on time at 1,55 ?

[Kristoferr]

Its 1.5v 1333mhz 9-9-9 default speed ram. Highly underestimated tho.
I didnt take a screenshot from stability test. I ran Linx on full capacity for 30minutes. It gave me error on 17min with 1.575v but passed 30minutes mark with 1.58v. So thats the voltage i am running it now.
I dont think that anything will happen to this ram under 1.6v in time. On 30min test, the chips didnt even get hot. Just warm enough to be able to touch them by hand. No heatspreaders, no fan blowing on them.

[Punisher!]

Its 1.5v 1333mhz 9-9-9 default speed ram. Highly underestimated tho.
I didnt take a screenshot from stability test. I ran Linx on full capacity for 30minutes. It gave me error on 17min with 1.575v but passed 30minutes mark with 1.58v. So thats the voltage i am running it now.
I dont think that anything will happen to this ram under 1.6v in time. On 30min test, the chips didnt even get hot. Just warm enough to be able to touch them by hand. No heatspreaders, no fan blowing on them.

I don't think there is any risk running them lower than 1,6 - 1,65V!

Are those modules low profile too?

[andressergio]

ok guys here is te apples to apples comparison fresh from the jar

my beloved Patriots 2000 9-11-9-27 1.65v @ 2133 9-11-9-27 1T 1.65v






the sammys 2400 CL11 1.35v @ 2133 9-10-10-29 1T 1.55v






to the left patriots to the right samsungs




Now i will just game BF3 see if it crashes then i will do some tests

cheers to all hope you like it
Sergio

[Kristoferr]

No, those are regular size and high.

http://skinflint.co.uk/eu/531278

[andressergio]

an update in stability

on the MIVE the samsungs not even at 1,6 will pass complete loops of Hyperpi32 i just get SQR ROOT / NOT CONVERGENT bla bla...tried more VTT lower, up all and this is on 2133 10-10-10-30 1T on less dont dream it with 16GB modules installed not even close to patriots...

[TEDY]

My 16GB of M378B5273DH0-CH9 arrived today from Germany.
First try 1.55v 2133 9-10-10-29-1T
Thats one nice ram!
Cost me total of 99€. not bad.
Did not do 9-10-9 @ 1.6v. Didnt want to push voltage any further. Im very happy with 2133 9-10-10.

how do you mean from GERMANY?

[Kristoferr]

Mate, i even linked skinflint shops list above. Just choose your shop. Confirm that they are M378B5273DH0-CH9 and order

http://skinflint.co.uk/eu/531278

Update. Im running prime95 blend test with them and it gives me error on that. Either i need to raise voltage some more or need to loose timings a bit. Will update if i get prime 30min stable, which i consider enough.

[TEDY]

so this are low profile etc? should be this low profile?

[3lfk1ng]

@andressergio
But can your beloved Patriots do this?

I just finished mounting the radiator last night, these are the first pictures of my new computer. As you can see, memory and mosfet clearance was very crucial to my build.




I couldn't top mount a radiator without this memory.

[PiLsY]

Nice!!

[OC Nub]

^ Very nice rig!

I think the reason for buying this memory is the low profile, low voltage, and low price. The memory being able to clock well is just a bonus. It isnt going clock as well as most high end gaming/enthusiast memory, or as good as some non low profile kits, but again, that isnt really the point of this thread.