Ultra low profile 1.35v 30nm DDR3 capable of 2400MHz. Perfect for SFF builds.

[NEOAethyr]

Your options are really strange. So 8GB or 32?

Why don't you just get 4x4GB Samsung sticks?

I've been noticing some ok'ish looking 8gig sticks out there recently.
Perhaps in the few months it may be worth getting those instead of the 4gig sticks, just maybe, not sure :|.

[PiLsY]

If you need more than 4x4gb you need a server

You will not get anything else this good and this cheap for a while, certainly not in 8gb sticks. If you do want to look into 8gb though crucial have some ballistix with the same part number, voltage and timings as the 4gb sticks everyone is drooling over in the crucial thread. You could buy 6 kits of this for the same price as a single kit of 2x8gb crucial though...see what I mean about those prices? You better make damn sure you need more than 16gb before you go for 8gb sticks.

[3lfk1ng]

if you need more than 4x4gb you need a server

You will not get anything else this good and this cheap for a while, certainly not in 8gb sticks. If you do want to look into 8gb though crucial have some ballistix with the same part number, voltage and timings as the 4gb sticks everyone is drooling over in the crucial thread. You could buy 6 kits of this for the same price as a single kit of 2x8gb crucial though...see what i mean about those prices? You better make damn sure you need more than 16gb before you go for 8gb sticks.

qft

[AVulgarPicture]

do you see a bonus in bandwidth scores running 4x4GB on an ivy platform as opposed to 2x4GB?
ivy's set up for dual channel so i wouldnt see anything as a bonus running 4 sticks for benching as opposed to two.
i dont need 16gb of ram, unless im going to see a bandwidth boost for benchmarking.

[krackpot]

Your options are really strange. So 8GB or 32?

Why don't you just get 4x4GB Samsung sticks?

Didn't really proofread what I wrote. I'm wondering if they're going to be making 8GB sticks (So I can pick up 4 to make 32GB and max the RAM out on my board).

Do you think RAM prices are likely to fall in the coming months?

[rouvio]

I got the kit to run stable at 2800MHz, dont have pictures, but please DO try these settings:

11-12-12-21-1T @1.72V

or

11-12-12-28-1T @1.73V

These worked and posted and booted Win7 fine. let me bench anything I threw at it (considering the CPU was not OC'd too much).

please try these and let me know if they work for you.

[C-N]

I got the kit to run stable at 2800MHz, dont have pictures, but please DO try these settings:

11-12-12-21-1T @1.72V

or

11-12-12-28-1T @1.73V

These worked and posted and booted Win7 fine. let me bench anything I threw at it (considering the CPU was not OC'd too much).

please try these and let me know if they work for you.

Thats awesome man....

You got an Asus board right?

Any chance of a memtweakit screen shot @ 2800?

[andressergio]

I got the kit to run stable at 2800MHz, dont have pictures, but please DO try these settings:

11-12-12-21-1T @1.72V

or

11-12-12-28-1T @1.73V

These worked and posted and booted Win7 fine. let me bench anything I threw at it (considering the CPU was not OC'd too much).

please try these and let me know if they work for you.

glad i kept 16GB of this

[rouvio]

Any chance of a memtweakit screen shot @ 2800?

my pleasure, tho it will have to wait for the night.
right now in Cleveland its about 85 and screaming steamy ^^

I promise I will.

[andressergio]

here last version of memtweakit rouvio just in case you need it

http://www.nexthardware.com/forum/ra...-1-01-6-a.html

[acebmxer]

This might be crazzy but has anyone tried this ram on X58 in tripple channel? I would really love to get some of this ram but I dont want to waste my money if it is not going to work on X58 or be any better then the ram I am using currently that is in my X58A-OC board.

[Cecil]

This might be crazzy but has anyone tried this ram on X58 in tripple channel? I would really love to get some of this ram but I dont want to waste my money if it is not going to work on X58 or be any better then the ram I am using currently that is in my X58A-OC board.

With X58 having 6 dimm slots, 4GB doesnt make much sense to me since you can run six sticks of BBSE/Hypers or something that would be better then any 4GB dimms, and still give you more ram then you need. I got 6x2GB of MNH-E Hypers on ebay for $100 shipped the other day.

[acebmxer]

I was look at the 8gb kit and I would buy 2 kits for a total of 16gb. I would only use 3 sticks for triple channel and save the 4th stick for later upgrade to a newer chipset.

[Cecil]

I was look at the 8gb kit and I would buy 2 kits for a total of 16gb. I would only use 3 sticks for triple channel and save the 4th stick for later upgrade to a newer chipset.

If you need more then 6GB, just go to 12GB using 2GB dimms.
AFAIK, 1366 cant really get the ram up that high in speed for daily use anyway without a ton of volts, so if you were to go 4GB dimms, the Crucials would be better since they run tighter timings.

But if I were you, Id just go 12GB (if you have a need for more then 6GB).

[rouvio]

It is SO hot right now outside - 3:25AM and 70 degrees.
With these settings I could only have Windows 7 picture - NO BENCHES were even possible with these outrageous temperatures outside.

Will take care of this issue, and will cool the computer better, and as promised (and claimed), will provide 2800MHz+ benchmarks.

*EDIT
In the provided picture the CPUV is high considering the not so much extreme OC.
I over volted just to be sure it'll boot.
normally, same memory settings will work on multiplier of X52 (3770K @ 5200GHz).

[C-N]

Thank you kindly, I can bench my BBSE @ 2600+ but cant get the Samsungs to boot so your screen shot may help me work out what's going on.

[rouvio]

my pleasure I can help few XS buddies my friend!
if it wont POST - go as high as 1.75V with PROPER AIR/WATER COOLING (not sub-zero).

I use the excellent DOMINATOR GT dual fan cooler.

[PiLsY]

I was look at the 8gb kit and I would buy 2 kits for a total of 16gb. I would only use 3 sticks for triple channel and save the 4th stick for later upgrade to a newer chipset.

Try dual channel, you may be surprised . It clocks higher (or you can try tighter timings) than triple. You have to muck around finding the "best" 2 slots out of the three though (usually 0/2 + 1/3). Kinda like x79 being better triple channel than quad... The extra channel is there for more bandwidth at intel rated speeds, its not always better when you push high mhz. I only discovered this when reading the x79 posts and having 4 x 2gb with one spare decided to play around, gained extra uncore mhz and mem mhz running 2+2 compared to triple.

[zoob]

Out of curiosity, has anyone else seen BCH9 chips out there? My work place just got a batch of RAM for upgrades and it's Samsung BCH9 where previously we got HCH9.

[rouvio]

[3lfk1ng]

Mother ...of ...god.

When I created this thread, I never thought that it would see anywhere near 2800MHz, you guys rock!

[Punisher!]

Mother ...of ...god.

When I created this thread, I never thought that it would see anywhere near 2800MHz, you guys rock!

/this!!!

[AVulgarPicture]

pretty incredible stuff.

[Don_Dan]

Out of curiosity, has anyone else seen BCH9 chips out there? My work place just got a batch of RAM for upgrades and it's Samsung BCH9 where previously we got HCH9.

The B indicates Flip Chip mounting, everything else should be the same as HCH9.

[andressergio]

The B indicates Flip Chip mounting, everything else should be the same as HCH9.

Hey Don how are you

whats Flip Chip mounting ?