Ultra low profile 1.35v 30nm DDR3 capable of 2400MHz. Perfect for SFF builds.

[TEDY]

I just don't get it, why is this not sold in EUROPE?

[Punisher!]

I really can't understand why. Perhaps they will rebrand them and they will be sold in Europe as uber-overclockers memories (+€€€€€).

Mine are so near! Just 50 km! I want to receive them today and not monday .

LOL, they are here!

[Punisher!]

Not actually stable!

[Punisher!]

First stability test:

1.58V

Problems AMD?

[amdsempron_xs]

Punisher! Size of the images is quite small, hard to look at. You have bigger ones?

P/S: I mean images with CPU-Z screenshots

[Punisher!]

Ye (copy-paste into browser)

[Punisher!]

AMD guys, is my bandwitdh ok?

[Barr3l Rid3r]

AMD guys, is my bandwitdh ok?

nope, you gotta up your CPU-NB clock, to around 2650mhz-2750MHz 1,30v

[Punisher!]

CPU\NB is already @2650Mhz+!

nope, you gotta up your CPU-NB clock, to around 2650mhz-2750MHz 1,30v

[Punisher!]

Sandra seems ok to me:

[BeepBeep2]

Impressive for that kit.
they are no Hyper or PSC, but they look good for what they are. In line with bad BBSE

Your Everest bandwidth is low for performance but looks in line with your timings.

Sandra bandwidth looks good too, I can pull about 18 GB/s with Hyper @ 1800 6-6-6 on X6.

I know you said 2133 10-10-10 was unstable, can you run 32M though?

[Punisher!]

Thanks for your reply. What about your Everest bandwidth?

Tomorrow I will try syntetic tests like 32M and get you in touch with them.

Impressive for that kit.
they are no Hyper or PSC, but they look good for what they are. In line with bad BBSE

Your Everest bandwidth is low for performance but looks in line with your timings.

Sandra bandwidth looks good too, I can pull about 18 GB/s with Hyper @ 1800 6-6-6 on X6.

I know you said 2133 10-10-10 was unstable, can you run 32M though?

[BeepBeep2]

Thanks for your reply. What about your Everest bandwidth?

Tomorrow I will try syntetic tests like 32M and get you in touch with them.

I have 565BE in my other machine...
I've got two machines in the house:
1- signature machine with FX which can't be compared

2-
AMD Phenom II X2 565BE
ASUS M4A89TD Pro/USB3
ATI HD4850
4GB 1600 6-8-6 RipjawsX (PSC)
750GB Hitachi DeskStar

I'll swap my X6 out for the X2 in that PC and run some tests for you with PSC/Hyper.

[Punisher!]

Ok, thanks a lot mate.

Anyway these babies are low voltage but seems to like it over. To get total stability @890Mhz 8-8-8 they need 1.6V (from 1,35V!).

I have 565BE in my other machine...
I've got two machines in the house:
1- signature machine with FX which can't be compared

2-
AMD Phenom II X2 565BE
ASUS M4A89TD Pro/USB3
ATI HD4850
4GB 1600 6-8-6 RipjawsX (PSC)
750GB Hitachi DeskStar

I'll swap my X6 out for the X2 in that PC and run some tests for you with PSC/Hyper.

[PiLsY]

AMazon refunded me $24 to cover the fees so im gonna pick the kit up monday morning - assuming its still there anyway lol.

[3lfk1ng]

niiice

[PiLsY]

Hope so! I have high expectations of them .

Have some mushkin blackline 10-11-10-28 1.5v 2133mhz to test this weekend to keep me busy (£60 2x4gb kit). G.Skill Ripjaw 2000mhz 9-10-9-28 1.55v kit is a no go for 1T and wont go lower than 9-11-10-30-2T in 16gb config.

I cant find those patriots in the UK unfortunately or i'd have given them a try instead of the mushkin. Not had mushkin ram since winbond BH6 days - blast from the past!

I should have a few kits to compare the Samsungs to if I ever get my hands on them anyway .


[EDIT : Dont want to spam in too many OT posts so... The Mushkin Blacklines are excellent. 9-11-9-27-1T @ 1.6375v/1.125v Prime stable (7000mb set, 720k min/max repetition). Highly recommended for £30 per stick.]

[TEDY]

punisher: make some pics per favore

deleted the word

[Punisher!]

punisher: coglione? make some pics per favore

Pics of what? Mate, that word is really offensive here.

See signature for daily.

[BeepBeep2]

Wow, I googled that...

Punisher, what does the kit do @ 9-9-9? I think you can get more bandwidth out at ~1950 9-9-9 than 1790 8-8-8.

[Punisher!]

The problem for 1950 9-9-9 is that I have to lower CPU (and CPU\NB too) frequency to 3700Mhz and bandwidth is then poor (already tried).

Divider @ 4Ghz are 2133Mhz or 1790Mhz!

2133Mhz is a no go (perhaps with more than 1,725V, max I have already tried, but I am not actually ready to put them @1,8V).

Wow, I googled that...

Punisher, what does the kit do @ 9-9-9? I think you can get more bandwidth out at ~1950 9-9-9 than 1790 8-8-8.

[Punisher!]

A strange thing I am noticing:
- sometimes, with low timings especially, I am almost Windows stable (I mean several minutes Prime95) but I get strange corruptions while in BIOS (also during post).

What could be the reasons of them?

[andressergio]

A strange thing I am noticing:
- sometimes, with low timings especially, I am almost Windows stable (I mean several minutes Prime95) but I get strange corruptions while in BIOS (also during post).

What could be the reasons of them?

that is mem...i have the same problem thats why i quit using them, seems well designed for X79 but hard for other chipsets

[Punisher!]

that is mem...i have the same problem thats why i quit using them, seems well designed for X79 but hard for other chipsets

Nice to hear that mate. So I am not the only one. When are you having it? Randomly(/cold boot)? Tight timings? Lower(\higher) voltages?

Thanks.

Goodbye!

[andressergio]

Nice to hear that mate. So I am not the only one. When are you having it? Randomly(/cold boot)? Tight timings? Lower(\higher) voltages?

Thanks.

Goodbye!

all the time i push them i guess its vtt, i tried more and went fine but i dont really want vtt over 1.12 as i use 1.08 and its more than enough for the patriots