G.SKILL F3-17000CL9Q-16GBZHD testing results

[ZoLKoRn]

This one kit from G.SKILL is looking interesting for abit cheaper Quad channel kits for SB-E, well let to see what i can do with it







Setup...

i7 3960X ES
ASUS Rampage IV Extreme
G.SKILL F3-17000CL9Q-16GBZHD
HD6970 CF
Intel SSD X-25M & Windows 7 64bit
Antec HCP 1200W



First try i checking performance of XMP profile is G.SKILL guaranty spec is DDR3-2133MHz CL9-11-9-28-2T compare with
CR 1T but same clock and timing

2133C9-11-9-28-2T by XMP boots and tRFC 96



Then change CR to 1T and i see tRFC is auto change to 120 after boots but other timing still same XMP - 2133C9-11-9-28-1T, tRFC 120

[ZoLKoRn]

Overclocking performance testing

DDR3-2230MHz CL9-11-10-27-120-1T, 1.66V










-----------------------------------------------------------------------------------------------------------------------------------

DDR3-2400MHz CL10-12-10-30-120-1T, 1.67V










------------------------------------------------------------------------------------------------------------------------------------

Thank you for your time

[konlaos]

llSJ ^^

[Shiranui Gen-An]

My set has CFR instead of BFR like these older kits but they seem to have room to go in terms of raw clock speed. I'm sure they can do 2666+ on Ivy Bridge.

37x122BCLK RipjawsZ 2133C9 1300MHz 11-13-13-35 2T HyperPi32M.jpg37x122BCLK RipjawsZ 2133C9 1300MHz 11-13-13-35 2T AIDA64.JPG

[Shiranui Gen-An]

My set has CFR instead of BFR like these older kits but they seem to have room to go in terms of raw clock speed. I'm sure they can do 2666+ on Ivy Bridge.

37x122BCLK RipjawsZ 2133C9 1300MHz 11-13-13-35 2T HyperPi32M.jpg37x122BCLK RipjawsZ 2133C9 1300MHz 11-13-13-35 2T AIDA64.JPG

Yes, indeed they can do at least DDR3-2666 on Ivy Bridge

3570k 44x100BCLK RipjawsZ 1333MHz 11-13-13-35 2T Super Pi 32M.jpg

[OC Nub]

Very nice! I love this kit, hard to beat for the price. Im playing with it now, seeing what it will do on normal voltages.

[OC Nub]

2666c11-13-13-35-1t 2x4gb and 2801c11-14-14-35-2T 4x4gb
My 2666 TridentX will not pass 32m at 2800mhz with any vdimm

The 2600 TeamXtreem c10 is quite nice also, but for the money, a good kit of these RipjawsZ is hard to beat IMO.

[OC Nub]

4x4gb RipjawsZ F3-1700c9 @2900c11-14-14-35-2T loose sub-timings 1.85vdimm, w7-64 efficiency is poor but mainly testing the IMC.

[Shiranui Gen-An]

2666c11-13-13-35-1t 2x4gb and 2801c11-14-14-35-2T 4x4gb
My 2666 TridentX will not pass 32m at 2800mhz with any vdimm

The 2600 TeamXtreem c10 is quite nice also, but for the money, a good kit of these RipjawsZ is hard to beat IMO.

Good grief those are some strong sticks. 1.66v for DDR3-2680 C10?!

[ChaosAD]

Is there a reason, other than speed screen shots, to run at these speeds with such high dram, vtt, pll etc voltages when i can run my 2133c9 ripjaws at 2400c11 with much better read/writes/latency scores?

Sent from my GT-I9000

[Shiranui Gen-An]

It's for the fun of it. Also I found if I run the subtimings on auto, I only need 1.65v set for 2666 C11.

See? My RipjawsZ mysteriously morphed into TridentX 2666 sticks

3570k 44x100BCLK RipjawsZ 1333MHz 11-13-13-35 2T HyperPi32M.jpg
3570k 44x100BCLK RipjawsZ 1333MHz 11-13-13-35 2T HyperPi32M Times.jpg
3570k 44x100 BCLK RipjawsZ 1333MHz 11-13-13-35-2T AIDA64BW.JPG

[TaPaKaH]

Some 1100MHz results (IMC limit) to contribute to the thread:

better pair:

worser pair:

all four together:

[TaPaKaH]

same quadkit, continued...

better pair:
1200 / 9-11-10-27 / 1.68V
1200 / 10-12-11-30 / 1.49V
1200 / 10-12-10-30 / 1.50V
1200 / 10-11-10-30 / 1.51V
1300 / 10-13-11-30 / 1.63V
1300 / 10-12-11-30 / 1.64V
1333 / 10-12-11-30 / 1.68V
1333 / 11-13-11-32 / 1.52V
1333 / 11-12-11-32 / 1.58V

second pair:
1200 / 9-12-10-27 / 1.71V
1200 / 10-12-11-30 / 1.51V
1200 / 10-12-10-30 / 1.52V
1300 / 10-13-11-30 / 1.67V
1333 / 10-13-11-30 / 1.72V
1333 / 11-13-11-32 / 1.53V

[TaPaKaH]

continued on Haswell:

better pair:
1333 / 10-13-11-30 / 1.69V
1333 / 10-12-11-10 / 1.78V
1400 / 10-13-12-30 / 1.84V
1400 / 11-13-12-32 / 1.61V

second pair:
1333 / 10-13-12-30 / 1.76V
1333 / 10-13-11-30 / 1.78V
1400 / 10-13-12-30 / 1.88V
1400 / 11-14-12-32 / 1.64V