agreed, but I still sipped on the kool aidOriginally Posted by hiwa
agreed, but I still sipped on the kool aid
Approvedagreed, but I still sipped on the kool aid
Agreed too but not as expensive as "binned" X57, x58 SB
Gskill seems to have a lot of difficulty to produce high end kit like the 19200C91110 sold out everywhere. Don't want to miss this one and i tested 16gb is overkill, 8gb is more than enough.
Hope is like good wine price increase over the time!
i7 3960X@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC19200C8, Corsair force GT 240go, 2XGTX Titan, MM Ascension, Seasonic X-serie Gold 1250W, Watercooling
i7 3930K@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC17000C9, OCZ Vertex 3 120go, GTX670 DCU2 Top, MM Pinnacle, Corsair AX850, Watercooling
be sure or buy it now or u have to wait a lot for next same memores....
right now they are the fast and best SB-E memories in the planet, i never saw 8GB 2400Cl8 before.
ahhh the good old daysApproved
that makes hypers look like cheap budget ram
Nice write-up mate
Testing my F3-19200CL11Q kit at Cl9, they rock!
Last edited by Viss; 12-12-2011 at 07:56 AM.
oh, nice 2400 Cl11 kit there.
Great write up my friend, gives beginners a lot of hope and courage.
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
First test with my 19200C8 kit with 1.65v:
Sticks have green pcb like good old 17000C8 ripX kit
i7 3960X@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC19200C8, Corsair force GT 240go, 2XGTX Titan, MM Ascension, Seasonic X-serie Gold 1250W, Watercooling
i7 3930K@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC17000C9, OCZ Vertex 3 120go, GTX670 DCU2 Top, MM Pinnacle, Corsair AX850, Watercooling
awesome, did u tried lower vdimm?
No just install it, i'll try this evening better timings higher and lower vdimm.
i7 3960X@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC19200C8, Corsair force GT 240go, 2XGTX Titan, MM Ascension, Seasonic X-serie Gold 1250W, Watercooling
i7 3930K@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC17000C9, OCZ Vertex 3 120go, GTX670 DCU2 Top, MM Pinnacle, Corsair AX850, Watercooling
looking good, I will have some results to post later tonightFirst test with my 19200C8 kit with 1.65v:
Sticks have green pcb like good old 17000C8 ripX kit
pi32 C7 with 1.7vdimm
EDIT: 7 11 7 28 1T
time will be better without HT but i just want to test the ram.
Last edited by pinto; 12-13-2011 at 10:36 AM.
i7 3960X@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC19200C8, Corsair force GT 240go, 2XGTX Titan, MM Ascension, Seasonic X-serie Gold 1250W, Watercooling
i7 3930K@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC17000C9, OCZ Vertex 3 120go, GTX670 DCU2 Top, MM Pinnacle, Corsair AX850, Watercooling
now we can talk about pinto
try lower VCCSA set 1.05 first for 2400 maybe u have a good cpu and can do it, but higher PLL can help
Tried C6:
Love that ram!
i7 3960X@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC19200C8, Corsair force GT 240go, 2XGTX Titan, MM Ascension, Seasonic X-serie Gold 1250W, Watercooling
i7 3930K@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC17000C9, OCZ Vertex 3 120go, GTX670 DCU2 Top, MM Pinnacle, Corsair AX850, Watercooling
wow another 2400 CL6
pinto you have a hell of a chip
vccsa 1.05
vdimm 1.725
psc tight profile
vccsa 1.05
vdimm 1.65
psc loose profile
Last edited by l0ud_sil3nc3; 12-14-2011 at 04:02 AM.
u guys are Gskilling right
Nice work guys!
I have a noob question. Am I expecting too much to find an 8gb kit to run in quad channel 2133 7-9-7 or even 7-10-7 24/7 on 1.7v or less?
I have a few 4gb kits that will do this on s1155, but unfortunately not matching kits. I just picked up a 4x2gb kit of G.Skill PI's that are running 7-10-7 28 2133mhz, but they only boot when using the Elpida Hyper profile. I dont know a lot about sub timings but they look to be loose compared to say the PSC Tight profile.
I have been using Gigabyte boards for a few years, and have just used the Extreme memory profile to set sub timings.
Last edited by OC Nub; 12-20-2011 at 04:49 PM.
PIS series are 90% PSC, have to use looser timing than hypers. PSC can't be stable at 8 tRCD, try to set 11.
first try PSC loos timing and set command rate to 2T...
Last edited by hiwa; 12-21-2011 at 03:25 AM.
^Thanks.
After running s1155 for a while, its kind of hard to get excited about 8 11 8 28 2t. Maybe Im not cut out for quad channel overclocking lol.
Last edited by OC Nub; 12-21-2011 at 04:17 PM.
not easy set tRCD lower than 10 or 11 on X79, we have to forget nice old tight timings
Trying DominatorGT 2000 c8's. Weird issue Ive been having from the beginning on this board with hypers. It will boot fine with 8gb at 2000c8 8 8 24, or 2133 8 10 8, and pass hyperpi and other benches with no issues. But at random the board just powers off. Only way Ive been able to fix this is by setting the channel ab/cd phase control to extreme. Asked Shamino if it was safe to run this 24/7, and he said its safe 24/7, just enabling 2 phases to run all the time instead of downing to 1 phase when load is low, power savings stuff. Anyone else have this issue? Is there another setting Im missing that will help fix this?
no hypers here to test with but I have not experienced this with BBSE or PSC, what kind of vdimm are you giving them?
Posting Permissions
Reply With Quote
Bookmarks