G.Skill F3-19200CL8Q-8GBZHD on R4E/3930K

[fredyama]

Some Max frequency, 2D & 3D OC results.
Thanks G.Skill & ASUS so much for your great support.

(Set up)
CPU：Core i7 3930K(ES)
M/B：ASUS Rampage IV Extreme BIOS:070B
Bench Table：SHT-02Rev.2.0 by NABE
CPU Cooling：Scythe Infinity + 1 x DELTA TFB1212GHE(Air) & MaxxNeo by TAM(LN2)
Memory： 2GB x 4 G.Skill Ripjaws Z F3-19200CL8Q-8GBZHD/PSC tight setting in BIOS CL7-11-7-28-96(88) 1T
VGA: Kuroutoshikou RH5570-LE1GHD(2D) & MSI GTX580 Lightning(3D)
HDD: Seagate ST3160815AS 160GB IDE mode(2D) & G.Skill Phoenix EVO 115GB(3D)
PSU: PCP&C Turbo-Cool 1200W(2D) + 3 x Corsair AX-1200(3D)

Due to a limit of the CPU’s IMC, could not achieved over 1300MHz.
True performance of the memory is yet to be determined

CL7 Max


2D results






3D results with CAL930 & Gyrock

http://hwbot.org/submission/2221258_...80_12559_marks


http://hwbot.org/submission/2221240_...0_46455_ma0rks

[badatgames18]

first 3930k benches i've seen (all i've seen so far are 3960)
very very nice mr. Fredyama

looks like very good memory there also 7-11-7 2450mhz just 1.7v... wow, will you try this memory on another platform? (like sandy bridge)

[LardArse]

Very nice sticks for sure Fred san, treasure them well, they are hard to find nowadays

[l0ud_sil3nc3]

congrats fred 2400 c7 is incredible

Very nice sticks for sure Fred san, treasure them well, they are hard to find nowadays

I don't think they even exist in retail, straight vaporware

[FlanK3r]

I love Gskills

[runmc]

Incredible latency at those speed. fredyama is a true Legend.
This memory must be one of a kind. gSkills ROCKS!!!

[fredyama]

Thanks so much all

Been away XS for a long time, but it's surely nice to be back

Fred

[PatRaceTin]

wow socket 2011 is good for ram oc

[Counter CS]

Can you see if they can make 6-9-6 @ 2133mhz or better ??

[LardArse]

I'm not able to do TRCD 9 but heres mine at 2400 CL6-11-6-28-1T

[fredyama]

Can you see if they can make 6-9-6 @ 2133mhz or better ??

I am not sure about with this memory.
Will try to find out along with this memory and my other G.Skill 2133 memory.
Please take a look at below thread for this G.Skill 2133 memory:
http://www.xtremesystems.org/forums/...=1#post5003872

And, here is 32M results on SB 2600K @CL6:

[fredyama]

You are always ahead of us, Peter-san

[Gautam]

Great results as always Fred-san.

[Counter CS]

I know those G-skill XMD C8, but they are no longer selling them.

Thats why im trying to find the next high-end DDR3 for 2240Mhz BCLK limited on air for some benchs.

I have some Corsair Hyper that run at 2240mhz 8-8-7-24, need better ICs

[fredyama]

Great results as always Fred-san.

Thanks Gautam-san.

Hope Orygun treats you good though

[youngpro]

wow fredyama-san those sticks looks real nice, good to see you posting on XS,

i need to do some testing with them for superpi low clock challenge!

[fredyama]

wow fredyama-san those sticks looks real nice, good to see you posting on XS,

i need to do some testing with them for superpi low clock challenge!

Thank you, James-san.

They are really awesome sticks indeed and love to bench for modPI32M.

Wish you all the best in your superpi low clock challenge

[Hondacity]

Are these sticks single sided?

I want these kits

Nice to have you here fredyama

[fredyama]

Are these sticks single sided?

I want these kits

Nice to have you here fredyama

Thank you, Hondacity-san.

Nope, they are double sided.

[Don_Dan]

Crazy RAM and kick-ass results!

Great to have you back, fredyama-san.

[hiwa]

very nice memory timings fredyama-san

[fredyama]

Can you see if they can make 6-9-6 @ 2133mhz or better ??

Unable to make @CL6-9-6, but here are @CL6-10 & CL6-11 results of G.Skill F3-19200CL8Q-8GBZHD-- just modPI 1M though..





As for modPI 32M, I am fond of benching with G.Skill F3-17000CL8D-4GBXMD -- finally broke into sub 6m

[fredyama]

Crazy RAM and kick-ass results!

Great to have you back, fredyama-san.

Thank you, Don_Dan-san.

Yes, these sticks are just awesome

[fredyama]

very nice memory timings fredyama-san

Thank you, hiwa-san.

Your memory oc guide is very nice

[Eldonko]

Very nice fredyama-san, welcome back! Pretty cool that you can run 32m only a few mhz less than 1m.