G.SKILL FLARE 8GB F3-16000CL7D-4GBFLS 7-9-7-24 1.65V (2Gx4) AMD X6

[hiwa]

Hi all

OK yesterday i had a bit time to play with new GSKILL flare kit with PSC ICs and New Bios from Asus C4F 0905
here we go









Specification

Main Board AMD ( For Phenom II x6 only )
System Desktop
System Type DDR3
M/B Chipset

AMD 890 Series
CAS Latency 7-9-7-24-2N
Capacity

4GB(2GB x 2)
Speed DDR3-2000 (PC3 16000)
Test Voltage 1.65 Volts
PCB
Registered/Unbuffered Unbuffered
Error Checking Non-ECC
Type 240-pin DIMM
Warranty Lifetime


　

Qualified Motherboards List

　
ASUS M4A89TD PRO
ASUS M4A89GTD PRO
ASUS M4A88TD-V EVO/USB3

[hiwa]

Setup :
G.SKILL FLARE 8gb
AMD Phenom X6 Thuban 1090T
Asus Crosshair 4 Formula 0905 bios
Thermalright Venomous X BLACK
Dimastech Hard Rev 2.5 Carbon Look

Everest 2000 7-9-7-24 1.65V bad effieciency caz low NB


Ok let try 32m

SuperPi 32m 2000 7-9-7-24 1.65V



Ok let run hyperPi

Hyperpi 6 X32m 2000 7-9-7-24 1.65V



Cool new bios seems better than older one ...

Later.. with higher NB freq and HT

[hiwa]

Hyperpi 6 X32m 2050 7-9-7-24 1.65V



everest 2090 7-9-7-24 1.65V

[Leeghoofd]

1T next Hiwa, and tighten TRC... I know you can do it

[hiwa]

1T next Hiwa, and tighten TRC... I know you can do it

thanks dude i am new in this stuff i never bench with AMD @ high memory frequency , let try tighter later first i wanted to know how is my CPU IMC, direct boot 2224 cl8 full air was easy to do, let see

[xbrian88]

but then this is your WR !!!!!

http://www.xtremesystems.org/forums/...d.php?t=254467

belonging to the jokes, nice result my friend

[siavash_shojaee]

great job hiwa
you are working hard man

keep pushing keep pushing

[chuchnit]

Man you are a busy little memory testing bee aren't you. Nice results so far.

[Aerou]

PSC all over the place ...

Can't go hihger with NB frequency?

[[XC] Oj101]

Up your NB to something reasonable and you'll see your maximum RAM speed drop As is your RAM is running at twice the speed your NB can handle.

[hiwa]

PSC all over the place ...

Can't go hihger with NB frequency?

seems you don't like PSC they are not bad you can play cold easy with them, not fragile and with new ICs you can play with tRC on AMD and tRCD on intel

Up your NB to something reasonable and you'll see your maximum RAM speed drop As is your RAM is running at twice the speed your NB can handle.

impossible on air higher than 2900 in my case if i want bench high memory

PS: i am trying to test memories first, i'll put cpu under SS -40 and up Nb

[M.Beier]

Nevermind if its 1T or 2T, that is bound by IMC anyway.

Congrats with the chip and chips :-)

[hiwa]

Nevermind if its 1T or 2T, that is bound by IMC anyway.

Congrats with the chip and chips :-)

2T i forgot to set it lol
thanks marc

[Royalk]

I'd be waiting to see if it can do 7-8-7-20-1T @ DDR3 2000!

[hiwa]

I'd be waiting to see if it can do 7-8-7-20-1T @ DDR3 2000!

i can tell you no PSC 2000 7-8-7 on AMD should be very hard to do, actualy just Hyper can do that but the price is triple

[Oliver]

nasty work man, keep pushing it

finally seing them in action

[PcCI2iminal]

WOW
sexy Flare Bro

and nice job as always

PS my kits of Flare still at Fedex
cant wait to put my hands on these insane AMD kits

[hiwa]

quick try higher NB fre and tight tRC




8GB Hyperpi 8-9-8-24 1.65 2100




thanks guys

Hey junior, you will enjoy this memories and AMD setup for sure, finaly good bios for PSC and we can play with

[Leeghoofd]

Keep on pushing it

[eva2000]

very nice.. good to see 4GB density modules starting to come to market - all we need is more than 6 dimm slots on consumer desktop boards LOL for >24GB action

[hiwa]

very nice.. good to see 4GB density modules starting to come to market - all we need is more than 6 dimm slots on consumer desktop boards LOL for >24GB action

they are not 4GB per module 4 X 2GB

[Leeghoofd]

George is dreaming again of high density Oc'able rams :p...

[Tomasis]

George is dreaming again of high density Oc'able rams :p...

time will come soon

[Tomasis]

hiwa, nice oc especially 4 sticks .. how mem divider works on asus?

test 6-7-6. Eco seems to do about 1550 primestable (1600 superpi32m). Im curious if Flare can do it better?

[PcCI2iminal]

mine is here



vdimm @ 1.65v

and sorry for the thread hijacking Bro