Asus CHV Formula overclocking

[charged3800z24]

Awesome, can't wait till my BD chip gets here...

[LardArse]

this was done quite long ago on the A0s



you need some PSCs and ~ 1.8v/1.5+v NB, 2700+ on 7-12-7 after which you need to pour the rams down to -180C

[Hondacity]

6-10-6 niceeeeee

[The Stilt]

6-10-6 niceeeeee

Nope.
That ain´t nice but so damn twisted that it should be considered highly illegal!

[BeepBeep2]

That is some sick ram...

[Dumo]

Bios 9911 with SS as old as FX55. Lol

[The Stilt]

Whats the PS0 (3600MHz) VID on your chip Dumo?
You can check it from CPU-Z register dump.

[FlanK3r]

I think, PS0 is at C5F OK....I have C5F (of course ) and I have 1.248V (so 1.25V) with 8120 (3400 MHz state)

[chew*]

Whats the PS0 (3600MHz) VID on your chip Dumo?
You can check it from CPU-Z register dump.

Don't think that matters stilt, In my testing at home just about every chip could valid at 6 gig even with all 8 cores on phase.

[Hondacity]

Nope.
That ain´t nice but so damn twisted that it should be considered highly illegal!

nooooo lol

the reality is giving me a headache..lol

even if its cl7 its still good in my opinion

you and shammy and chew* and dumo are just awesome guys ..keep us amd'in

[The Stilt]

Don't think that matters stilt, In my testing at home just about every chip could valid at 6 gig even with all 8 cores on phase.

Maybe not, but generally it seems to help to determine if the chip is a leaker or a "keeper"

[chew*]

See, I dropped $230 of my own cash on the board to get ready for BD.
Mind you I am a 16 year old with no job so no income. I do things here and there for person X and person Y and make a negligible amount of money every once in a blue moon.

As far as the board being fine other than being totally inefficient with Thuban/Deneb performance wise? Of course it's fine. I love my board other than the fact that my system is now slower than it was before and I am down $230.

From another thread
http://www.xtremesystems.org/forums/...my-house-today....

Quote OP.

CrossHair V mysteriously showed up at my house today....

I will give my x6 a run on it soon and will hopefully put the FX chip on it soon also

What bios has been the best one so far for Thuban?

Quote second replier.

Hey, one of those showed up at mine too O_o

[chew*]

Maybe not, but generally it seems to help to determine if the chip is a leaker or a "keeper"

I lost count of which is which 30 chips ago......

[Hondacity]

@stilt & chew*

sf3d & macci said higher vid helps, is that the other term for "leaky"? It sorta goes against the binning process from Intel lol

here's their no coldbug adventure: http://youtu.be/-YzdkkCV_Pg

so nice having no cb

[The Stilt]

Lower VID = Higher leakage
Higher VID = Lower leakage

Generally.

The differences I have seen are not that major, however lower leaking chips seem to do better with normal air / watercooling.
For better cooling you might want a high leaking chip.
For LN2 you will probably want something between a "leaker" and a "keeper".

[FlanK3r]

It will be some comparsion thread from Chew with more chips (validation air, watter, phase)?

[Dumo]

whats the ps0 (3600mhz) vid on your chip dumo?
You can check it from cpu-z register dump.

1.2v

Bios 9911 default..

[The Stilt]

1.2v

Bios 9911 default..

1.2375V is the lowest I have ever seen before

[Dumo]

It's almost impossible to find FX8150 for sale here in US, exept a couple of Ebays

[BeepBeep2]

From another thread
http://www.xtremesystems.org/forums/...my-house-today....

Quote OP.



Quote second replier.

Yes, of course...
A Crosshair V did show up at my house, however I paid for mine in full. I am now a stuck up kid that complains about everything, why would anyone give me hardware for free? Gary Key was going to supply me with a M5A99X and a few GPUs I believe (they were already packed in a box for shipment) but that was three months ago on ASUS 900 series line-up release day and I don't see that happening anymore.

Originally I had that ASUS AM3+ board coming, but it never made its way to me. I went ahead and bought one. A few days later FX was released, and it was much less than impressive for desktop workloads. Besides that, I now do not have money to buy a chip to put in my new AM3+ motherboard.

Its almost impossible to find FX8150 for sale here in US, exept a couple of Ebays

http://www.shopblt.com/cgi-bin/shop/...r_id=224368156

A bit overpriced, and you'd have to wait a week...

[Dumo]

http://www.shopblt.com/cgi-bin/shop/...r_id=224368156

A bit overpriced, and you'd have to wait a week...

Imo, the first (FX8150) shipment @ release day all went to Newegg. Others like Micro Center, Frys have to wait.

BLT, Provantage and even Tiger Direct will take orders but dropship it from distributor....who knows when

[chew*]

1.2375V is the lowest I have ever seen before

In my testing the lowest vid chips fell on there face on ln2 this time around.

We have seen down to 1.225 and up to 1.40

@ Beep, you posted in a thread about a board mysterioulsy appearing at your house, usually if you order a board it's not a mysterious appearance so your post here and there is rather confusing.......


While in taiwan on 13th i walked PC mall late afternoon to find a BD retail, no luck.

I have like 4 retails, will give them a spin soon preferably a day when wife isn't home.........

[demonkevy666]

In my testing the lowest vid chips fell on there face on ln2 this time around.

We have seen down to 1.225 and up to 1.40

@ Beep, you posted in a thread about a board mysterioulsy appearing at your house, usually if you order a board it's not a mysterious appearance so your post here and there is rather confusing.......


While in taiwan on 13th i walked PC mall late afternoon to find a BD retail, no luck.

I have like 4 retails, will give them a spin soon preferably a day when wife isn't home.........

please change the DC mode [duel] on the north bridge and test if you can.
i want to see any variations

[BeepBeep2]

In my testing the lowest vid chips fell on there face on ln2 this time around.

We have seen down to 1.225 and up to 1.40

@ Beep, you posted in a thread about a board mysterioulsy appearing at your house, usually if you order a board it's not a mysterious appearance so your post here and there is rather confusing.......


While in taiwan on 13th i walked PC mall late afternoon to find a BD retail, no luck.

I have like 4 retails, will give them a spin soon preferably a day when wife isn't home.........

I apologize for the confusion, I was merely stating that my board arrived.

It didn't make much sense for me to make another thread.

[G.Foyle]

I've had some problems with cold booting this board below -80 C. Warm resets are okay, but after hard reset I have to warm up - any ideas what that might be?

It also seems to have the same "tiring" syndrome Crosshair III had. After 2-3 hours it won't bench at the same clocks anymore, but that might be related to my insulation method and something on the board freezing too much.