Naos will only go up and down when moved left to right on 1.15a, moving the mouse up and down results in no movement from the cursor at all
Naos will only go up and down when moved left to right on 1.15a, moving the mouse up and down results in no movement from the cursor at all
Custom Cube : ASRock Ex4 G3 : i5 2500k : 8GB Ballistix Tracer : EVGA GTX580 @ 900/1800/2200 : 90GB V2e : 640GB Black : 1TB F3 : HX650
Swiftech Über 655 Fully Modded D5 : Phobya Balancer 150 : HK LT v3 : EK GTX580 : RX360 : RX240
Asus Xonar D2X : Logitech Z-5500 : Logitech G930 : Dell 2408WFP : Dell 1907FP
New bios 1.20 for asrock extreme 4 gen.3
http://www.asrock.com/mb/download.as...%20Gen3&o=BIOS
Just wow, they includded 10.8.0.1303 OROM in new 1.20 bios, claiming "3. Update RAID ROM." - i'm impressed
So once again, here's my modified UEFI for Asrock Z68 Extreme4 Gen3 P 1.20I , it's just P 1.20 with newest Intel OROM 11.0.0.1339, use it on your own risk or just make it yourself.
Last edited by apatch; 03-11-2012 at 02:02 AM.
Here is another flavor of the Mod
Modified ASRock Extreme 4 Gen 3 1.20
Changes Made:
1. Updated Intel Option ROM 11.0.0.1339
2. Intel MEI Firmware 7.1.20.1119
3. VGA Bios Build 2120
Note: Once the Bios is updated, upon reboot, the board will power down, startup and update the MEI Firmware, shutdown and reboot normally. Be patient through this process!
Running with no issues on my machine
Last edited by p4spooky; 03-11-2012 at 08:36 AM.
CASE: Coolermaster 690
MB/CPU: Asus P6X58D-E Intel Core i7-950 @4Ghz @ 1.2675v - BLCK: 211 * 19
RAM: 12GB G.Skill DDR3 1694 Ripjaws 9-9-9-24 @1.52v
GPU: PNY GTX 460 1GB
HDD: : 5x1TB Hitachi 7K1000.C (1 Boot + 4 on ICH10R RAID 10)
PSU: Coolermaster SilentPro 700W
Updated to 1.20 bios and did fresh install of win7 64bit but while writing some dvds kept getting buffer under run so have gone back to 1.15A which has sorted the problem no more buffer under runs.
Thanx a lot p4spooky, I will flash it, did you tried to find and integrate newest lan and marvell firmware ?
@chippy
Are you using your DVD burners on Intel sata ports ? Cause I don't have such a problems on Marvell ports. So this could be related to ODD function - link
@vulture_g7: Thanks for the feedback on the modified bios.
@chippy: Did you flash the modified bios or the vanilla version? - Did not notice any slowdowns on the Marvell ports that I use for optical drive. Looking forward to feedback from @apatch
CASE: Coolermaster 690
MB/CPU: Asus P6X58D-E Intel Core i7-950 @4Ghz @ 1.2675v - BLCK: 211 * 19
RAM: 12GB G.Skill DDR3 1694 Ripjaws 9-9-9-24 @1.52v
GPU: PNY GTX 460 1GB
HDD: : 5x1TB Hitachi 7K1000.C (1 Boot + 4 on ICH10R RAID 10)
PSU: Coolermaster SilentPro 700W
So far so good update without any problems. I was little cautious because my raid card 9211-8i is very fastidious with what UEFI/bios/orom it cooperates.
Thinking about integrating 11.5.0.1111 orom but it's still alpha, so will not risk borking 4Raid0 and 2 SDDs.
I don't have any DVDs to burn so will not check how it works now. But earlier got some problems when writting DVD/BD even on my previous AMD system, but still didn't found a cause, maybe Daemon Tool SPTD driver or something else.
Still struggling with some high DPC latency peaks which are result of working Utorrent + MSE (maybe netlimiter and Broadcom lan drivers), soon I will found out when I try some cheap Intel lan card soon.
CASE: Coolermaster 690
MB/CPU: Asus P6X58D-E Intel Core i7-950 @4Ghz @ 1.2675v - BLCK: 211 * 19
RAM: 12GB G.Skill DDR3 1694 Ripjaws 9-9-9-24 @1.52v
GPU: PNY GTX 460 1GB
HDD: : 5x1TB Hitachi 7K1000.C (1 Boot + 4 on ICH10R RAID 10)
PSU: Coolermaster SilentPro 700W
vanilla version its been ok since going back to 1.15a.
What is OROM? and what can upgrade to version 11.0.0.1339
Boot your PC and you will see some Intel info with OROM version at the top of a screen, press CTRL+I which gives you Intel Raid configuration utility.
Here's my old info screen.
Then under windows install right Intel RST version, for 11.0.0.1339 OROM install RST 11.1.0.1006 or 11.0.0.1025, in RST software you will also find actual info of RST and OROM versions (Help/system report).
Last edited by apatch; 03-14-2012 at 06:14 AM.
New Etron drivers (0.111) here:
http://www.station-drivers.com/page/etron.htm
work fine so far for me.
I have install Intel RST but i see the Version 11.0.0.1032 ??
try this direct link: http://www.station-drivers.com/telec...ivers.com).exe
Just got this board as a replacement for my boot-looping Gigabyte. Love it so far, only one thing.
I'm testing at 5GHz, 1.45v, and whenever I start LinX the multi just jumps around. It'll boot into Windows at 5GHz, but as soon as I launch LinX the multi drops to 38, 39, 41, or 47. It just jumps around from there.
bleachigo had a similar issue a few pages back, but I didn't see a resolution. I've disabled all C-states, along with temp throttling and Speedstep. Core current is at 200, from 150. Any suggestions?
i5 2500k, 4.8GHz, 1.345v | Asrock Z68 Extreme4 Gen3 | 2x4GB Samsung DDR3 1600, 1.35v | CM 212+ P/P | Powercolor Radeon 6950 1GB | Intel X25-V 40GB + 74GB Raptor + 2TB Caviar Green | CM690 | HX620 | CM690 |
PhII 960T, 3.99GHz, 1.49v | Gigabyte GA-MA790GP-UD4H | 2x2GB OCZ DDR2 800 + 2x1GB AData DDR2 800 | CM 212+ P/P | Zotac 7600GT | 1TB Caviar Green |
Heat
Antec P180//Asrock Z68 Extreme4 Gen3//SB i5-2500K//Noctua NH-D14
Crucial Ballistix Sport 8GB//Ati HD4890 1024MB//Seasonic 600w
Vertex 3 Agility 60GB SSD//2 x Samsung SpinPoint F3 1TB SATA-II 32MB
Perhaps I'm being daft, but where is the Power Limits setting in the uefi?
i5 2500k, 4.8GHz, 1.345v | Asrock Z68 Extreme4 Gen3 | 2x4GB Samsung DDR3 1600, 1.35v | CM 212+ P/P | Powercolor Radeon 6950 1GB | Intel X25-V 40GB + 74GB Raptor + 2TB Caviar Green | CM690 | HX620 | CM690 |
PhII 960T, 3.99GHz, 1.49v | Gigabyte GA-MA790GP-UD4H | 2x2GB OCZ DDR2 800 + 2x1GB AData DDR2 800 | CM 212+ P/P | Zotac 7600GT | 1TB Caviar Green |
Heat
In the overclock tab, you set turbo to manual and you should input 250 in both values. A few lines lower there's a current limit setting which must be set to 200 (or higher).
anyone running extreme 3 gen 3 with crossfire? Working ok? What cards? What Bios? I can't get my 6850's to play at all.
i5 2500k @ 5Ghz @ 1.475v
Asrock Extreme 3 Gen 3 + Crossfire 6850
EK DCP4.0 - EK Acetal HF - GTX360 Rad
Anyone running Extreme 3 Gen3 having issues with LLC? A couple users over at TT having issues with LLC see here http://forums.tweaktown.com/asrock/4...eme3-gen3.html
Main Rig
Gigabyte z78x-OC Bios F5n
i7-4770k batch L310B492 Malay @ 4.5ghz with HT 1.2v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn
HiS ATI HD 6950
Corsair Force GT 120 GB Sata3 SSD (boot drive) on Intel sata3 controller port0
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port1
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port4
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Suppreme HF Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Server
HAF 932
Gigabyte z77x-UD3H F13
i7-3770S batch 3212B621 supports VT-D and low power
32GB 4x8gb Muskin Enhanced Blackline 10-10-10-27@1.65v
Vmware vSphere ESXi 5.0u1
4x500GB Hitachi Deskstar 7K1000.D Raid 10 on a IBM M1015 <- DataStore
Sapphire HD 5850
Bookmarks