Having a total nightmare with my PC, can you help ?

[jamieuk23]

Just finished my new build today including a new 570 + 2500k

Every time I start my PC I get this type of pattern displaying on my screen, pressing tab or delete to enter the bios causes it to just freeze.



I have tried taking the graphics card out and using the onboard graphics and all it does it causexact same problem - Took the card fully out

es the image to look like this

Have tried using a different HDMI cable and still no luck ! have tried different Ram as well

Any ideas what I can do ? could the CPU be faulty or wouldnt it even boot with a faulty CPU ?

Stressed and havent got a clue what to do and been playing for 2 days !

Please help

[masterg]

sounds like a bios issue. maybe try flashing it to a new version or ask the motherboard guys for help

[Peakr]

If I had to guess I'd say motherboard issue. Head on over to the tweak town forums. Those guys are pretty good about sorting you out.

http://forums.tweaktown.com/gigabyte/

[TV Addict#2]

also looks like the type corruption display a defective vdimm module can produce

[little_scrapper]

The kanuker valve is stuck. Hit it with a hammer.

[TV Addict#2]

maybe take the cooler off that new card and bake it in a 400f oven for ten minutes(placed on a flat pan on foil balls and certain the circuit side faces up)
fixed an out of warranty x1900 with this procedure

[haPpydUde]

no its not the graphics card he took it out to test and without its the same, looks like its time to rma that new motherboard freind. Could be a small piece of metal on the mobo somewhere. Take everything apart and flip the motherboard upside down worth a shot.

[tiro_uspsss]

I just had that appear on a PC I was in front of the other day - I was messing around with it by mixing around the RAM... I'd say u have a RAM related problem.

[matari]

Try one mod. at a time and see if the issue continues.

[Pillo-kun]

maybe your psu, mine did the same thing.. i changed to new mobo and memory but for nothing... then a psu and it worked...