Playing arround - Copper pearlescent 1 off Pre-mix

[mlwood37]

The venture has now changed to developing this into a pre-mixed liquid

Questions and answers can be found here ->

http://www.xtremesystems.org/forums/...=1#post4921665

[CrazyNutz]

Looks awesome, but it also looks like a recipe for a nice clog. Unless perhaps the blocks & rads are less restrictive, like a DD MC-TDX Block and a XSPC rad.

[mlwood37]

It should be fine as the pre-mix is a bit more than i normally use and this aids in keeping the partials separate. The only way to find out is to hand it over though for testing in his loop for long term effectiveness and see if it does block. As long as the partials are moving i don't see a problem but if its going in a micro jet block it may block up the ports as these are not nano partials.

This is the first time this mix will be going to some one other than me so we can see how it goes.

[RCG_Bex]

I jizzed.... tis smexy XD

[theseeker]

Very cool.

[CrazyNutz]

if its going in a micro jet block it may block up the ports as these are not nano partials.

Yes this is what I was thinking. I bet it will be fine in a not so restrictive block. Nice work

[Captain_Harlock]

Looks geat! Your vid made me miss the 80's though. Good sound track pick.

[mlwood37]

blame ST for that Steve & Ayd haha.

Once i get another system up and running ill test it out in that and see how things go.

Ive got silver, gold, blue and a few other colours to test as well.

[Aphellyon]

Very nice... I can't wait to see what this looks like in a loop.

[mlwood37]

Pump arrived 1/2 hour ago so no messing straight on with Pump ware and tear testing ...







excuse my res its a bit messy pmsl ....

[Church]

mlwood37: does your test loop include some of top cpu blocks of today? rad, pump .. most gunk imho can be got on highly concentrated flow under jetplate of such blocks, so probably would be nice for testing worst case scenario. And those clearly visible particles .. somehow make me cautious.

[mlwood37]

not at the moment as ive ran out of PC's to test this on. Im awaiting a block to arrive in the post which hasn't turned up yet to add to this.

The particles are quite small on this liquid how ever were looking at even smaller size. As said all ready that this would not be for a restrictive loop

if its going in a micro jet block it may block up the port

and is not a performance liquid. Its a modding / looks only liquid for "Show" pc's. It will be fully tested on various blocks over the coming months to see what will happen. What you see here is a very early liquid made up by request for some one.

1 thing i have all ready noticed is that if your pump is running at full speed you do not get as good effect. All so its important to direct you lighting correctly so that it shows up. In normal light you can see some movement but not much how ever with bright light the reflective nature is 100 fold better.

[mlwood37]

Oky here we go .... Now go grab your socks or is it some thing else...... i can never remember ..

btw this is a revised mix.

[CrazyNutz]

OMFG That's next level! Very nice. But yes I wan't to know how well behaved it is with a block. Oh and I wan't your res!!!!!

[tiborrr]

Hardcore!

[mlwood37]

A quick one

A massive thank you to http://www.specialtech.co.uk/ Esp Steve and AYD.

They are supplying me with a CPU block and Pump so that we can get this tested better and quicker.

seriously Ayd rocks and is all ways offering to help me push the development of my liquids more.

thank you.

Mick

[DarthBeavis]

that is a limited edition res - I have one as well but there were only a handful made
http://www.youtube.com/watch?v=XMBDVrU-BLI
http://www.youtube.com/watch?v=iGoyOkYXPhs

[mlwood37]

Its just a shame ive hammered it so much. That res has been the best one i have ever had tbh and its been though hell and high water with me and still come out on top.

mind you its a iTs A sUpRiSe ShOw.... pmsl

[paulbagz]

Holy #@$%#$^$#^&&!!!!!!!!!

-PB

[mlwood37]

right thks to http://www.specialtech.co.uk/ they supplied me with a EK LT block today so i can run testing on restrictive blocks. Any how as suspected its a no goer how ever all is not failed. The particles i am using are tiny but not small enough so ill take it a few steps further. Been in contact with the manufacturer (1 hour ago) and there going to send me some much smaller versions that should be able to pass though the blocks easily. All so the new ones have been coated so they disperse better.

I wait till they turn up and continue delving this idea.

[PiLsY]

You really need something with an injection plate to test for gunking Mick. I'm not sure the LTX would be as affected.

[mlwood37]

Im checking for it going though the actual narrow channels. I know this will never work on a injection plate system that is not my aim for this liquid. The aim for this is to have a liquid for show, not performance enhancing ability and is a liquid especially made with modding in mind. It ofc will still need to work like any normal pre-mixed liquid as in that it will remove heat from the Block to the Rad but wont be sold with any false illusions that it is a performance liquid.

The idea is this liquid is like a Lava lamp in your room. they hardly give off any light but they do look good .

If we do mange to get this working and running fine it will be sold with some very clear warning's of what it will work with and what you can expect. We will also test to see what it doesn't work with so it may be a costly exercise in me getting more blocks from different makers and testing them out.

ill keep you all posted any way !!!!

[BeepBeep2]

Im checking for it going though the actual narrow channels. I know this will never work on a injection plate system that is not my aim for this liquid. The aim for this is to have a liquid for show, not performance enhancing ability and is a liquid especially made with modding in mind. It ofc will still need to work like any normal pre-mixed liquid as in that it will remove heat from the Block to the Rad but wont be sold with any false illusions that it is a performance liquid.

The idea is this liquid is like a Lava lamp in your room. they hardly give off any light but they do look good .

If we do mange to get this working and running fine it will be sold with some very clear warning's of what it will work with and what you can expect. We will also test to see what it doesn't work with so it may be a costly exercise in me getting more blocks from different makers and testing them out.

ill keep you all posted any way !!!!

Then I will be honest, not many people will care and not many people will want it. Nobody cares about "performance enhancing ability" like you keep stating, they just don't want it to up their loop.

[mlwood37]

The aim is for it not to clog up you loop lol. I don't test, adjust, re test, adjust for now reason.

[Kayin]

More people watercool for the looks than performance, honestly. I can remember someone asking about a fluid like this eight years ago. So people obviously want this.