Asus Direct CUII volts++ w/o hardmods?

[SteveRo]

I just picked up a new CUII for a good price.
Did a quickie run at 1.15v (AB) in am3 - 1000/1100 was no problem on stock air - looks promising?
I will eventually do dice on this but i want to be able to up the volts to 1.28 or so when I do.
i tried about 4 different versions of AB, none of them worked beyond 1.15v.
Looks like Nvidiainspector only goes to 1.15 also - at least the version I was using.
Is there a way to get > 1.15v on the CUII w/o doing hard mods?

edit - vid is <1v I will post exact vid tonight when i am home.

[SteveRo]

I just picked up a new CUII for a good price.
Did a quickie am3 run at 1.15v (AB) - 1000/1100 was no problem on stock air - looks promising?
Vid is <1v, I will post exact vid tonight when i get home.

Forgive me if this had already been answered.
I will eventually get this card cold and i want to be able to up the volts to 1.28 or so when I do.
i tried about four different versions of AB, none of them worked beyond 1.15v.
Looks like Nvidiainspector only goes to 1.15 also - at least the version I was using anyway.
Is there a way to get > 1.15v on the CUII w/o doing hard mods?
Help!

[SteveRo]

I haven't tried smartdoctor before but it looks like this might be the answer - -

http://kingpincooling.com/forum/show...t=smart+doctor

From Messrs Shamino - http://www.mediafire.com/?t0a9krhq5pxl4x8

and Splave -

what an epic card
no mods
-135c
1.39 via smart
1280 core for heaven
almost to easy eats ln2 like crazy with a fattie

[Splave]

smart doc is what you want just like you said
coupled with F.ROM bios, very fun excited for your results

[Splave]

smart doc is what you want just like you said
coupled with F.ROM bios, very fun excited for your results

[Hondacity]

cbb mod(conductive pen) no soldering required
1390mhz @ -140c
1.5ish volts

3d03

you have to warm up the card(run benchie)...you can't go straight into 1300 immediately...

igot smartdoctor with 1.6v enabled if you need it. but i think you have it already..

[l0ud_sil3nc3]

F.Rom bios link anyone?

[G H Z]

http://kingpincooling.com/forum/showthread.php?t=1096

[[XC] gomeler]

Merging this.. duplicate posts not necessary.

[Hondacity]

f.rom i think will have 1.5v... which is high even for dice

[youngpro]

awesome to see you expanding Steve,

3d is alot of fun and very addictive when you get started!

[T_M]

video card section?

[Sauron_Vie]

can´t find the f.rom @shaminos´s lair, only the d.rom. or am i blind ?

[SteveRo]

Thanks everyone, i will be trying this hopefully over the weekend,

Moderators - TM is probably right - should this be moved to the video card section?

[Deux]

http://hwbot.org/forum/showthread.php?t=20424

[Splave]

f.rom i think will have 1.5v... which is high even for dice

negative you are thinking of matrix, this will only allow above 1564 for clocks as well as cold slow. You have to do the +400mv stock mod to have 1.5v default.

[Hondacity]

my bad is fail my bad

[Sauron_Vie]

http://hwbot.org/forum/showthread.php?t=20424

thx man, but the f.rom is no longer available. another link ??

[Sauron_Vie]

thx man, but the f.rom is no longer available. another link ??

nobody ?

[SteveRo]

I want to SLI bench my reference sparkle calibre with my CUII.
How do I work the oc software - can I use smartdoctor for both?
I currently have -

what I think is the the shamino cold slow on the sparkle (bios 70.10.12.00.01, subvendor ASUS (1043)) and

stock bios on the CUII (bios 70.10.17.00.00, subvedor ASUS (1043)).

What is the best bios for each and what s/w is best given that I want to sli the pair?
Smartdoctor for both, SD for CUII, MOA580 AB for sparkle?