AOD v4

[charged3800z24]

The latest version for AOD is available for download...
Looks clean and supports BD

http://sites.amd.com/us/game/downloa.../overview.aspx

[RussC]

Does it run on any chipset now?

RussC

[duploxxx]

the same VID - voltage thingy seen on the BD screens so it must be something embedded within AOD v4

[nex_73]

From releasenotes:

This version of AMD OverDrive™ Utility supports systems with the following AMD Chipset products:
 AMD 990FX Chipset
 AMD 990X Chipset
 AMD 970 Chipset
 AMD 890FX Chipset
 AMD 890GX Chipset
 AMD 890G Chipset
 AMD 790FX Chipset
 AMD 790GX Chipset
 AMD 790X Chipset
 AMD 785G Chipset
 AMD 780G Chipset
 AMD 770 Chipset

AMD OverDrive™ Utility 4.0.3 Update list:
1. Added support for AMD Family 15h Processors
2. Added support for AMD 9-Serials Chipset
3. Updated to new UI skin and layout
4. Added DQS reading enhancement for Family 10h and later memory controllers
5. Improved the algorithm of benchmark calculation
6. Fixed the bug that AOD shows two GPU cores when a single-core video card is attached
two displays via VGA and HDMI.
7. Enhanced the temperature calculation method for SB800
8. Added SB800 IMC support
9. Make all dialogs in System Diagram page be modal and respond ESC key (to close the
dialog)
10. Added the enhancement that the main window should only be moved by dragging on the
"title" area
11. Added UEFI BIOS support

[FlanK3r]

Im in ...(lol, my 1090T is better and better with newest BIOS, now only 1.3V for 3970 Mhz )

[XRL8]

Multiplier changing doesnt work for me :-/. It started kind of in version 3.2.3 because i couldnt get below multi 10x.Is there a place where i can send a bug report of this ?
I know that they "care" probably only about Am3+ mobos now, but my chipset is in supported category...
On a side note, anyone has a link to a site which keeps all the version not just the newest ones ?I think 3.2.1 worked properly.

[wez]

Much better design/layout than their older version

[zalbard]

Much better design/layout than their older version

+1
Looks very functional. Nice to have a monitoring / OC tool working on the whole range of AMD motherboards.

[Manicdan]

the overclocking screen is going to feel really short once 8 cores are being listed

[Hondacity]

woooooo

i haven't even tried v3.xxxx LOL

[RussC]

Piss, doesn't support my chipset, what a shock!

RussC

[El Gappo]

Gained a little functionality on the Biostar boards. Don't have to go through turbo to change multi's on deneb, can alter ram timings, and can change a whole 2 voltages. Still can't alter the ref clock tho. Fan control doesn't work and target speed still goes off a ref clock of 200 always. Poo

[charged3800z24]

Doesn't work on my Zacate...

[Daveburt714]

Thanks for the heads up on the new AOD charged...

It actually seems to be much more stable than past versions!

One problem I've noticed about it though, is when you save a profile, it seems like it applies the clocks first. Then the voltages which usually results in a crash...

I've been able to work around it, by uping the V's before I load the profile, but I could see where that could cause problems for rookies.
(Of course it could just be me, I've had a few beers, but I think I'm right )

Anyway... Using this new version, I've managed to tweak the clocks to the point where I've gotten an AWESOME Everest Mem/Cache score (personal best!)...

Check it out. Pretty impressive IMO for C4F/Thuban:

[Hondacity]

thats awesome dave

[FlanK3r]

heh , is Brazos in support list?

[alpha0ne]

Doesn't work on my Zacate...

If it does not work with E-350 then whats the point

[DedEmbryonicCe1]

8. Added SB800 IMC support

What does this mean?

[MikeMurphy]

One problem I've noticed about it though, is when you save a profile, it seems like it applies the clocks first. Then the voltages which usually results in a crash...

I've been able to work around it, by uping the V's before I load the profile, but I could see where that could cause problems for rookies.
(Of course it could just be me, I've had a few beers, but I think I'm right )

Thanks for this!

[charged3800z24]

Thanks for the heads up on the new AOD charged...

It actually seems to be much more stable than past versions!

One problem I've noticed about it though, is when you save a profile, it seems like it applies the clocks first. Then the voltages which usually results in a crash...

I've been able to work around it, by uping the V's before I load the profile, but I could see where that could cause problems for rookies.
(Of course it could just be me, I've had a few beers, but I think I'm right )

Ya, I had that issue with other Version of AOD. I have since did the same thing, apply voltage first. Good observation and thanks for sharing!

[Mechromancer]

Added SB800 IMC support

What does this mean?

+1! The SB800 has a memory controller WHY?

[FlanK3r]

I have problem in AOD4, I cant only next 2 multipliers up, no more....Why? Some bug?

[Lightman]

I have problem in AOD4, I cant only next 2 multipliers up, no more....Why? Some bug?

New motherboard maybe?

Go to Turbo core tab and UP Turbo multi to higher value -> OK it and then you can rise CPU multi up to Turbo multi again. Works for me, or though annoyning at times.
I suspect disabling Turbo in BIOS will let you select any CPU multi in AOD without that trick

[FlanK3r]

ok, I can try it ...thx.