Should be all here
http://forums.vr-zone.com/hardware-d...ml#post9705331
It's not a issue that will just suddenly crop up one day I wouldn't think. The issue would seem to be fixed with Z68, and given the maturity of the UEFI on the P67 Extreme4 I'd be surprised if the bug still exists on that board. AFAIK every bug I have reported to Asrock the R&D team has fixed
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Well, it is now going to sleep properly ... don't know what I changed there but its now working fine. Strangely enough I went back to stock speeds and the system wouldn't wake up from sleep first time I tried so had to do a reset.
I assume the overclock is stable after 12 hour prime and 3 hour linpac though. I think I can probably do 4.3 Ghz at stock voltage as I managed to do 4.4 Ghz 7 hour prime stable before one of the cores crashed.
Intel i5 2500k @ 4.2 Ghz
TRUE 120 Extreme @ Scythe S-FLEX 1600rpm
8GB (2x4GB) G.Skill RipjawsX PC12800 CL8 1.5V
AsRock Z68 Extreme4
2x 6950@70 2GB CrossfireX
Dell U2711
OCZ Vertex 2E 60GB SSD
Samsung F3 500gb HDD
Silverstone FT-02B-W
Overclocking.. fun isn't it? On another note good news Z68 owners I just this minute answered the door and got the Z68 Extreme4 I must say its rather impressive when you open that flap up and lay your eyes on it for the first time Pictures and a review are also inbound I'm just waiting for my new temperature gun to arrive for a portion of the review I'll be doing.
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
New BIOS - 1.4 released!
http://www.asrock.com/mb/download.as...xtreme4&o=BIOS
Notes: Modify fot GPT mode.
Intel i5 2500k @ 4.2 Ghz
TRUE 120 Extreme @ Scythe S-FLEX 1600rpm
8GB (2x4GB) G.Skill RipjawsX PC12800 CL8 1.5V
AsRock Z68 Extreme4
2x 6950@70 2GB CrossfireX
Dell U2711
OCZ Vertex 2E 60GB SSD
Samsung F3 500gb HDD
Silverstone FT-02B-W
Updated first post with some UEFIs.
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
When I changed BCLK from 100 to 100.1 I noticed the UEFI info screen will say 4848Mhz for CPU speed with 48 multi instead of 4805. Cosmetic bug of being off a decimal space? The CPU really runs at 4805 so no big issue, just wondering if its known or others have the seen it.
3770K @ 4.8Ghz 1.42V | GSkill 2x4GB @ 1066Mhz | Asrock Extreme4
2600K @ 4.5Ghz 1.38V | GSkill 2x4GB @ 933Mhz CAS 9-10-9 1.5v | Asrock Z68M/USB
1090T @ 3.8 Ghz 1.42V | Crucial 4x2GB 666 CAS 8 | Asus M4A79XTD EVO
Q6600 @ 3.66Ghz(8x458) 1.35V | GSkill 2x2GB @ 550Mhz 5:5:3:13 2.1V | Asus Maximus Formula(Rampage 0401) |
I'll check it when I have the Z68 Extreme4 up and running Just waiting on a temp gun to arrive to get everything done in one go
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
For anybody not being able to wake from sleep with a high overclock on the Z68 Extreme4 it's recommended you update the UEFI to version 1.4, it has been extensively tested and this problem can no longer be duplicated. It would seem intel or Asrock found a reliable fix and implemented it with UEFI 1.4
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
How about the same solution on P67 Series?
i5 2500K (L041C124) @ 5GHz + Scythe Mugen 2 rev. B | ASRock P67 Extreme4 B3 UEFI L3.19 | ADATA 2x4GB DDR3 1600 | MSI Radeon RX 470 4GB | 2x Crucial m4 64GB SSD RAID 0, Seagate 7200.12 500GB, Samsung F4 EG 2TB | 24" HP LP2475w | EVGA SuperNOVA G2 750W | Fractal Design Define R3 | Windows 10 64 bit
Intel i5 2500k @ 4.2 Ghz
TRUE 120 Extreme @ Scythe S-FLEX 1600rpm
8GB (2x4GB) G.Skill RipjawsX PC12800 CL8 1.5V
AsRock Z68 Extreme4
2x 6950@70 2GB CrossfireX
Dell U2711
OCZ Vertex 2E 60GB SSD
Samsung F3 500gb HDD
Silverstone FT-02B-W
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Um, Ket is telling the truth.
It's a BUG in Intel's firmware. D1 stepping chips don't even support internal pll overvoltage in the first place.
Gigabyte did NOT fix the issue. You seem to think they did--they did NOT. I have the board. I TESTED the bios. They simply did a BAND AID for it. You want to know what happens with latest bios?
1) GO into sleep
2) wake up from sleep. Fans spin up for 5 seconds.
3) board TURNS OFF.
4) Board does a COMPLETE REPOST to BIOS, cpu and RAM count, just as if the board were completely shut off.
5) You boot to the OS choices menu (if you have one).
6) Windows says "resuming from standby".
7) It loads faster than if you loaded it manually, but NOT by much. And the hard drive SWAPS forever ...it's actually faster just to power off the board and power back on, due to the swapping.
All Gigabyte did is make the board repost as if it was powered off (it actually does power off), to reinitialize the register which controls CPU PLL overvoltage.
It's not a fix at all.
If you want a real fix, contact Intel.
Um, I thought you were the one with no sleep problems too... Apparently I'm the only one then.
But let's not go off topic here.
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
UEFI 1.4 was extensively tested with a 2500K CPU. Every possible combination of options was tested and the problem can't no longer be duplicated with the new UEFI, so based on that, yes, the problem should be fully cured now
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
I have this board with UEFI 1.40, and I have no sleep issues, with PLL overvolt enabled @4.8GHz.
The board sleeps and wakes with no problem.
Boot drive is an OCZ RevoDrive X2, I'll try it later with a Vertex 3.
[EDIT]
Confirmed working with OCZ Vertex 3, and no issues with sleep or wake.
Last edited by Wendy; 05-25-2011 at 09:36 AM.
Review PC
AsRock Z68 Extreme 4 | 2600K @4.8GHz 1.35V | 2x 2GB GEIL Ultraline 2133MHz @ 1600Mhz 7.7.7.24 | ATi 5770 Vapor X | OCZ RevoDrive X2 240GB | OCZ Vertex 3 240GB | RealSSD C300 128GB | OCZ Vertex 2 100GB | 2x Samsung F3 1TB | Enermax Liberty 620W | Antec 900
Good to know, looks like we got that one nailed too
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
@EzyRyder, have you tried UEFI 1.4 yet and has it fixed your eSATA problems?
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Intel i5 2500k @ 4.2 Ghz
TRUE 120 Extreme @ Scythe S-FLEX 1600rpm
8GB (2x4GB) G.Skill RipjawsX PC12800 CL8 1.5V
AsRock Z68 Extreme4
2x 6950@70 2GB CrossfireX
Dell U2711
OCZ Vertex 2E 60GB SSD
Samsung F3 500gb HDD
Silverstone FT-02B-W
You could update through Windows... but I think we both know if you did that I'd be forced to break out the shaky head smiley at you
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Fresh off the press! One of my Asrock contacts has today sent me a shiny new UEFI for the Z68 Extreme4; 1.4A. The change is a clever little bit of code that will automatically detect and set any XMP profile that has been pre-programmed into the memory modules SPD data. Anyone that tries this beta UEFI could you please post in this thread letting me know if your XMP profile automatically got loaded? Thanks
I'll upload the UEFI once the file hoast resolves its technical issues, it'll be available to download from the first post
ED - Link is now live!
Last edited by Ket; 05-27-2011 at 04:55 AM.
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Nice one Ket. Not a deal breaker for me though as it only takes 5 seconds to go to the BIOS and change it to pick the XMP profile. Got my USB pen today, I will be flashing to the latest 1.4A bios anyway so will let you know how it goes!
Intel i5 2500k @ 4.2 Ghz
TRUE 120 Extreme @ Scythe S-FLEX 1600rpm
8GB (2x4GB) G.Skill RipjawsX PC12800 CL8 1.5V
AsRock Z68 Extreme4
2x 6950@70 2GB CrossfireX
Dell U2711
OCZ Vertex 2E 60GB SSD
Samsung F3 500gb HDD
Silverstone FT-02B-W
Bookmarks