2.8c Sl6wj

[Ravilj]

does any1 hav a 2.8C with sSpec of SL6WJ

If so please post ur FSB, vCore, Cooling and location of manufacture, please.

Shot Ravilj

[xtrempinoy]

i got a sl6wT, mine overclocks to 3.3ghz with stock voltage (1.525vcore)

[rashio]

i got 1
2.8@3.5 with vcore 1.60, stock cooling
malay(if that is what u mean)

[xtrempinoy]

rashio, why do you have soo much vdimm pumping through your ram? your ram can probably handle 250mhz with like only 2.8-2.9vdimm

[skate2snow]

I think its becoze he have enough tight timings for the PC3700.

[Ravilj]

Thanks guys... I'm in the proces of trying to find a descent oc'er as hard as that sounds...what makes it worse is i'm in SA, no suppliers allow u 2 check sSPecs so its the luck of the draw or buying an existing CPU that some1's tried...

Off topic: whats the general consensus or guesstamation of the overclockability of the prescotts?!

[skate2snow]

no, the best 2.8 you can have is M0(SL6Z5)

[skate2snow]

Originally posted by Ravilj
Off topic: whats the general consensus or guesstamation of the overclockability of the prescotts?!

Prescott is SUPPOSED to easyly do 280x15 and on OC forums ive even heard 280x16:o. And why???, its becoze of the 32 stages pipes and the 90Nm core

[GRiM]

I got a 2.8C SL6WJ waiting on the desk:
FPO/BATCH#: Q344A565
Pack Date: 11/20/2003
Malay

Will probably test some tomorrow.

[skate2snow]

you have the same has me(execpt the date)

[Ravilj]

grim could u post ur clocks, cooling and what not once u've put it through its tests!?

[Soulburner]

Originally posted by skate2snow
Prescott is SUPPOSED to easyly do 280x15 and on OC forums ive even heard 280x16:o. And why???, its becoze of the 32 stages pipes and the 90Nm core

We haven't even seen one overclocked yet so you can't give out numbers like this.

It should do it, it wouldn't be possible to NOT clock higher than the Northwood, but you get my point.

[GRiM]

Originally posted by Ravilj
grim could u post ur clocks, cooling and what not once u've put it through its tests!?

Yeah, sure.
I will be most likely installing the hardware today into antec 1080AMG case. Cpu will be cooled by zalman 7000a-cu.
Other hardware:
Abit AI7
KHX3500 with BH5 chips

Just wondering how the crooked socket will effect the cooling performance, since the whole heatspreader wont't be making contact with the heatsink. Oh well, only a small area from two corners that won't make contact, so i should be ok

[mrzee]

Originally posted by Ravilj
does any1 hav a 2.8C with sSpec of SL6WJ

If so please post ur FSB, vCore, Cooling and location of manufacture, please.

Shot Ravilj

SL6WJ
FPO/BATCH#:L309A771-Malay
PACK DATE: 05/28/03

[mrzee]

A little 1:1 action. This was achieved on my P4C800-E. First shot was on a Max 3

[skate2snow]

Im alway impress to see your chip mrzee

EDIT: And man you did 290 RAM!!!!!! I think you love KHX 3500 too

and is that stable????

[mrzee]

Thanks skate. No, not stable, only good for screenshots. 3D stable at 282 fsb.

http://service.futuremark.com/compare?2k1=6924628

[skate2snow]

still damn good man!!!!!!!!!!

I can only do 230FSB w/ the same same chip

[GRiM]

Originally posted by skate2snow
you have the same has me(execpt the date)

Exact the same fpo/batch?
So far i haven't seen any results with such a new 2.8C.

[GRiM]

So far so good, first test at 220MHz fsb, default Vcore and has been priming(two of them) for quite a while now.
Temps are at 43C, this zalman really is nice

[GRiM]

230MHz fsb = 3225MHz at default vcore prime stable. Will keep on testing

[skate2snow]

you do what im doing at 1.575.

Good you have a good CPU

[GRiM]

240MHz fsb = 3360MHz is stable at 1.55V, will keep on testing

[skate2snow]

you will do 250FSB w/ 1.6

[GRiM]

At least 3475MHz seems to be stable at ~1.61V. Got error after 20 minutes when running at 3500MHz the first time, but i'll let the cpu burn if for a couple of days