Rotary SS 24/7 , need all advice

**MAXIMUS.RAMPAGE** · 05-06-2011, 03:50 AM

Hello everybody!
i'm was sell my Vapochill and want to buy really serious phase change unit.
First my think is rotary SS 12.000 BTU, stage is like little devils units, very nice!
i need to use like 24/7 really some 6-8 hours per day all week..
I need all advice and information about this?
Would you help me please?
Best Regards!

**Patrickclouds** · 05-06-2011, 04:10 AM

do you know how noisy a rotary is?
i would´t use one for 24/7

**t800** · 05-06-2011, 09:15 AM

**sdumper** · 05-06-2011, 10:11 AM

Unfortunately Rotaries are best used for benching because they vibrate a lot and even with rubber mounts they make a lot of noise. If its cased and you try to dampen the noise you risk overheating so you compensate with stronger in/put fans which just adds to the noise.
Go with a bigger reciprocating compressors like a Copeland brand. They are big and very heavy but also very quiet. Did I mention heavy

**n00b 0f l337** · 05-06-2011, 10:47 AM

Ask for a 10 ft suction line with oil separator, then put it outside your home!

**MAXIMUS.RAMPAGE** · 05-06-2011, 02:05 PM

Well ! if really so i have no experience with rotary units, i'. use only normal phase change Vapochill LS...
somebody has rotary unit and use him for all the time 24/7??
The rotary units lookin amazing it is really nice and powerfull...........

I want to know that can be run for 24/7 or not?
I think to purchase rotary ss from LittleDevils . here is link http://www.ocxtreme.org/forumenus/showthread.php?t=2932
What somebody can to explain me about this unit , and who use the rotary for everyday?
Want to know everything becouse i am new in this area,,,,,,, so i need some advice and information please ?
KING REGARDS!

**runmc** · 05-07-2011, 05:35 AM

Yes it is a beautiful unit. We have all explained to you our thought.
It seems you only want to hear us say "Buy It"

okay -

BUY IT

**[XC] Oj101** · 05-07-2011, 05:40 AM

I HOPE YOU'RE EITHER DEAF OR DON'T HAVE A PROBLEM WITH GOING DEAF. YES I'M SHOUTING.

I reckon you should get a 100ft suction line and bury it in an underground bunker

**runmc** · 05-07-2011, 05:52 AM

Originally Posted by [XC] Oj101

I HOPE YOU'RE EITHER DEAF OR DON'T HAVE A PROBLEM WITH GOING DEAF. YES I'M SHOUTING.

I reckon you should get a 100ft suction line and bury it in an underground bunker

LMAO

I don't think he can hear you.

**MAXIMUS.RAMPAGE** · 05-07-2011, 09:16 AM

thanks for support guys!!
also i'm hear everybody who txt ......
so no point to buy the rotary unit for 24/7........ i'm will crying....

the rotary units lookin amazing and powerfull
THANKS FOR HELP!
KING REGARDS!

**runmc** · 05-07-2011, 10:07 AM

As I told you in PM - Little Devil does amazing work. If you need a 24/7 cooler, ask him to build you one. Tell him you want a strong single stage with quiet hermetic compressor that will hold 300w.

**MAXIMUS.RAMPAGE** · 05-07-2011, 10:57 AM

Thanks Admin for great help and information !!!
I'm like this site!!
Thanks everybody!!!!
KING REGARDS!

**MAXIMUS.RAMPAGE** · 05-07-2011, 11:13 AM

**sdumper** · 05-08-2011, 05:27 PM

If it helps. If I was going to buy a custom made single stage in Europe I would buy from Littledevil. He builds a ton of these units and knows what he is doing with quality and experience to back him up.

If its too loud just wear earphones

Commercial options also exist with coolerexpress which are a good balance between performance and noise.

**MAXIMUS.RAMPAGE** · 05-09-2011, 06:14 AM

Thanks for Respond!!!!!
great support in this site!

KING REGARDS!

**piotres** · 05-31-2011, 02:06 AM

Originally Posted by sdumper

If it helps. If I was going to buy a custom made single stage in Europe I would buy from Littledevil.

Scott, I'll remember You that

!

**kayl** · 05-31-2011, 06:04 AM

i wear earplugs when i bench my rotary cascade for 5-6 hrs

its hard to speak to friends that are around during the benching session with earplugs in though

also ya need to stick carpet or some or of absorbing material under rotary unit to help reduce vibrations that vibrate though your computer desk
if you use a large case with sound dampening inside of the case you can greatly reduce the noise level
Realistically ya need a normal compressor with sound dampening to have a silent unit for 24/7, especially if you leave your pc running in the room while you sleep for those crazy folding ppl

**MAXIMUS.RAMPAGE** · 06-02-2011, 02:22 PM

Originally Posted by kayl

i wear earplugs when i bench my rotary cascade for 5-6 hrs

its hard to speak to friends that are around during the benching session with earplugs in though

also ya need to stick carpet or some or of absorbing material under rotary unit to help reduce vibrations that vibrate though your computer desk
if you use a large case with sound dampening inside of the case you can greatly reduce the noise level
Realistically ya need a normal compressor with sound dampening to have a silent unit for 24/7, especially if you leave your pc running in the room while you sleep for those crazy folding ppl

Well my great friends!
Probably you are right! The cascade is really loud unit, i know that- but very powerfull!
Thanks

**teyber** · 06-22-2011, 07:33 AM

IMO, you have a working, 24/7 phase unit. I wouldn't loose that; id keep your vapochill and buy a benching phase change or buy a ln2/dice pot

**sdumper** · 06-22-2011, 04:15 PM

Originally Posted by piotres

Scott, I'll remember You that

!

Opps or buy from Piotres

**X-Tripiot** · 06-30-2011, 10:48 AM

Piotres ftw

**MAXIMUS.RAMPAGE** · 07-10-2011, 04:37 PM

Thanks!!!!

Thread: Rotary SS 24/7 , need all advice

Thread Tools

Search Thread

Rate This Thread

Display

Rotary SS 24/7 , need all advice

Bookmarks

Bookmarks

Posting Permissions