Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Hey guys I just bought this board and love it but was wondering if anyone has had the bios hang right before the marvell 3.0 controller loads. Every so often the bios just gives me a flashing cursor and won't load. I can disable the marvella 3.0 controller since I don't use it or if I just reset the computer and it is fine but it hangs occassionally, just a little irritation is all.
Last edited by trt740; 07-25-2011 at 08:56 PM.
Processor: Intel 2500K 4.4ghz
Motherboard:Asus Sabertooth P67
Cooling: Prolimatech Megahalem 3x120mm fans 2x Icages, 2x92 mm fans, 140mm PSU fan
Memory: Mushkin Redline (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1666 6 8 6 24 t1
Video Card:Asus Matrix GTX 580 1.5GB
Harddisk: Wester Digital Black Edition 32MB 7200 RPM 1TB SATA 3.0 ,CAVALIER SE 16MB 640GB SATA 3.0 DRIVE
CD/DVD Drive: 1 BLACK LG LIGHT-SCRIBE DVD BURNERS
CRT/LCD Model: BLACK ASUS 25 INCH MONITOR 50000 TO 1 RATIO 1920x 1080P
Case: Thermaltake Armor Series VA8003BWS Black Full Tower Case solid side panel.
Sound Card: Sound Blaster Live 24 Bit 7.1
PSU: Thermaltake Xt 850 watt SLI 140mm silent fan
Software Windows Vista Ultimate 64
anyone?
Processor: Intel 2500K 4.4ghz
Motherboard:Asus Sabertooth P67
Cooling: Prolimatech Megahalem 3x120mm fans 2x Icages, 2x92 mm fans, 140mm PSU fan
Memory: Mushkin Redline (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1666 6 8 6 24 t1
Video Card:Asus Matrix GTX 580 1.5GB
Harddisk: Wester Digital Black Edition 32MB 7200 RPM 1TB SATA 3.0 ,CAVALIER SE 16MB 640GB SATA 3.0 DRIVE
CD/DVD Drive: 1 BLACK LG LIGHT-SCRIBE DVD BURNERS
CRT/LCD Model: BLACK ASUS 25 INCH MONITOR 50000 TO 1 RATIO 1920x 1080P
Case: Thermaltake Armor Series VA8003BWS Black Full Tower Case solid side panel.
Sound Card: Sound Blaster Live 24 Bit 7.1
PSU: Thermaltake Xt 850 watt SLI 140mm silent fan
Software Windows Vista Ultimate 64
Yup, you're not alone.
Hi all!
I'm joining the club. Completed my rebuild about a week now. Getting issues with BSOD and freezes before POST and such. It doesn't matter if I'm stock or OC, something's not quite right yet. I am running my Hitachi on the Marvell controller, should I go to the Intel? Worth a try I guess.
A OC noob question, if I formatted and installed on the Marvell, is it safe to just move it? I noticed earlier some backup programs were causing shut down issues, got those too, Shadow Protect is my backup. I once let it go and it took over 30 minutes to reboot. I don't have that much patience so I just pop it. Yet SOMETIMES the reboot button fails! I have to hold Power to kill it. Oy! I built this to end issues with the old build, PSU is same, but in PCP&C I trust. ;-)
It's running between upper 30's and lower 40's on normal load, 60's if I OCCT or Prime95.
What other clues can I give to help me diagnose it?
Joe in Los Angeles
ASUS Sabertooth P67 B3
Core i7 2600k
2x4GB Corsair Vengence 1600 9-9-9-24
CoolerMaster H212+ Push-Pull
eVGA GTX 460ee
AverMedia AverTV Tuner
Hitachi DeathStar 3TB 7200
PCP&C 910 Silencer
Antec P182
What in the world made you guys use the Marvell controller? As an SSD enthusiast, the best advise I can give, is to disable the marvell controller, and keep it that way.. This board has Intel SATAIII, two ports, and Intel SATAII with 4 ports, never use anything else for internal storage/OS-drives..
Never testet the mv9128 Marvell on this board, but tested the same controller on other boards and allthough no BSOD crept up, it was complete ....
As for changing controller to Intel from Marvell while the OS is installed, navigate to this regkey: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\Msahci and change the "Start" value to "0", then reboot and change to Intel, install Intel drivers when you get back into the OS and remove the Marvell stuff if this is installed....
When it comes to performance, only the 9182 Marvell is decent, all the rest is crap imho, as for stability, I've not experienced any issues, that is with latest Marvell drivers not OS default...
Last edited by Ourasi; 08-01-2011 at 10:33 AM.
| Ci7 2600k@4.6ghz | Asus SaberTooth P67 | Sapphire HD7970 | Samsung B555 32" | Samsung 840 PRO 128gb + 2xIntel SSD 520 120GB Raid0 + 2xC300 64GB Raid0 | Corsair Vengeance 16GB DDR3-1600 8-8-8-24 | Vantage GPU=40250 |
do you guys leave speed step on or off during overclocking?
Processor: Intel 2500K 4.4ghz
Motherboard:Asus Sabertooth P67
Cooling: Prolimatech Megahalem 3x120mm fans 2x Icages, 2x92 mm fans, 140mm PSU fan
Memory: Mushkin Redline (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1666 6 8 6 24 t1
Video Card:Asus Matrix GTX 580 1.5GB
Harddisk: Wester Digital Black Edition 32MB 7200 RPM 1TB SATA 3.0 ,CAVALIER SE 16MB 640GB SATA 3.0 DRIVE
CD/DVD Drive: 1 BLACK LG LIGHT-SCRIBE DVD BURNERS
CRT/LCD Model: BLACK ASUS 25 INCH MONITOR 50000 TO 1 RATIO 1920x 1080P
Case: Thermaltake Armor Series VA8003BWS Black Full Tower Case solid side panel.
Sound Card: Sound Blaster Live 24 Bit 7.1
PSU: Thermaltake Xt 850 watt SLI 140mm silent fan
Software Windows Vista Ultimate 64
Here it's off per usual, allthough it probably won't matter one way or another in regards to OC...
| Ci7 2600k@4.6ghz | Asus SaberTooth P67 | Sapphire HD7970 | Samsung B555 32" | Samsung 840 PRO 128gb + 2xIntel SSD 520 120GB Raid0 + 2xC300 64GB Raid0 | Corsair Vengeance 16GB DDR3-1600 8-8-8-24 | Vantage GPU=40250 |
thx
Processor: Intel 2500K 4.4ghz
Motherboard:Asus Sabertooth P67
Cooling: Prolimatech Megahalem 3x120mm fans 2x Icages, 2x92 mm fans, 140mm PSU fan
Memory: Mushkin Redline (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1666 6 8 6 24 t1
Video Card:Asus Matrix GTX 580 1.5GB
Harddisk: Wester Digital Black Edition 32MB 7200 RPM 1TB SATA 3.0 ,CAVALIER SE 16MB 640GB SATA 3.0 DRIVE
CD/DVD Drive: 1 BLACK LG LIGHT-SCRIBE DVD BURNERS
CRT/LCD Model: BLACK ASUS 25 INCH MONITOR 50000 TO 1 RATIO 1920x 1080P
Case: Thermaltake Armor Series VA8003BWS Black Full Tower Case solid side panel.
Sound Card: Sound Blaster Live 24 Bit 7.1
PSU: Thermaltake Xt 850 watt SLI 140mm silent fan
Software Windows Vista Ultimate 64
New AISuiteII 10140 http://dlcdnet.asus.com/pub/ASUS/mis...VistasWin7.zip installs fine on my Sabertooth P67, even has TurboV EVO program and others not in the 10113 version )))
System 1: Intel Core i7 2600K D2 | ASUS Sabertooth P67 B3 (BIOS 1904) | 4 x G Skill F3-12800CL7-2GBECO @ 1866 8-9-8-24-2T | XFX Radeon HD5870 @ 1000/5000 | ASUS Xonar Essence ST | OCZ Vertex 2 120Gb | 4 x WD20EARS 2Tb HD | HL-DT-ST BDDVDRW GGC-H20L | Corsair Pro Gold AX1200 PSU | EK-Supreme HF Full Nickel CPU Block | EK5870 GPU Block | Swiftech MCP655 with EK-D5 X-TOP | EK-BAY SPIN Reservoir | TFC 360 | Hardware Labs Black Ice SR1 120 | Corsair Obsidian 800D
System 2: Intel Core i7 Extreme 975 D0 | Rampage II Extreme (BIOS 2002) | 3 x Corsair CMG6GX3M3A2000C8 @ 1600 6-6-6-18-1T | XFX Radeon HD6870 | Intel X25M 80Gb | Corsair HX750 | Corsair H70 | Antec 900
"Don’t be troubled if the temptation to give advice is irresistible; the ability to ignore it is universal."
Hi,
I guess I'll join the club and say that I love my Sabertooth and I've had it for a while now with zero issues of any kind. Running the 2600K at 4.4 at 1.26V during full load...
My toys...
Asus X79 Deluxe | i7 4820K | Koolance CPU-380I w/Triple Rad/Swiftech Pump | RipjawsX 16GB 1866MHz | eVGA GTX 780 TRI-SLI | X-Fi Surround 5.1 Pro USB | Intel 530 120GB *2 RAID 0, Intel 510 250GB, Samsung 840 Pro 120GB, Samsung 840 500GB, Kingston V300 240GB | Corsair AX1200i | In Win D-Frame Orange | Win 8.1 Pro 64
Asus Sabertooth Z77 | i7 3770K | NH-C12P SE14 | Vengeance 32GB LP | eVGA GT 240 | X-Fi Titanium Fatality | LSI SAS 9211-4i | Intel 330 120GB, Seagate 500GB *2, Samsung 200GB, WD 320GB *4 RAID 10, 500GB, Raptor 74GB | Antec TPQ-1200W | Corsair 650D | Win 8.1 Pro 64
Asus Sabertooth P67 | i7 2600K | NH-U12P SE2 | Vengeance Pro 16GB 1866MHz | eVGA GTX 680 | Sound via HDMI | Intel 330 60GB, Samsung 840 Pro 120GB, WD VRaptor 300GB, 150GB *2 | Antec HCG-750W | Lian Li PC-60FNWB | Win 8.1 Pro 64
Asus P8H77-M/CSM | i3 3220 | Shuriken | Vengeance 16GB LP | eVGA GT 610 | Sound Blaster Play | Hauppauge WinTV-HVR-1600 & HD PVR | Asus PCE-AC66 | Kingston V100 128GB, WD 1GB, 500GB, Seagate 2TB | Enermax Liberty 500W | Fractal Design Core 1000 | Win 8 Pro 64 w/Media Center
Asus P8H77-M/CSM | i3 3220T | Hyper 212 Evo | Vengeance 8GB | eVGA 210 | Hauppauge WinTV-PVR-250 | Intel 330 60GB, WD 750GB, 250GB | Enermax Liberty 500W | Antec 300 | Win 7 Premium 32
Axial SCX10 2012 Jeep Wrangler Unlimited Rubicon Modified
Joined the Sabertooth club a few days ago. Very happy with this board
Chasis Corsair Obsidian 700D Mobo Asus Sabertooth P67 (BIOS: 3602) CPU i7-2600K / Corsair H80i RAM Corsair Vengeance 16GB DDR3 GPU MSI 670GTX PSU Corsair TX 750W Storage 120GB / 240GB OCZ Agility 3 / 12 TB HDD / Optiarc AD-7240S DVDRW Display Hanns.G HG281DJ 28in LCD Monitor OS Windows 8 Pro x64
I've had nothing but problems with the Marvell ports on my last two motherboards. I had better performance with the Sata 2 Intel ports on my P55 than I did with the Sata 3 Marvell ports that also had issues with data corruption. I also had issues with the Marvell ports on my P5Q Deluxe. I've had a better track record with Nvidia chipsets as far as reliability. One of my favorite features about this board was the option to turn off all of the crap that I don't use like the Marvell ports and the USB3 controller
I don't see why not. Its not you're overclocking the bus speed anymore. So speedstep should work fine as long as you use an offset to set your vcore. I turned it off to test my overclock and I can't seem to turn IEST back on. I'm not sure if it relies on other C-states which I have turned off although I'm not sure why it would.
I plan on finally updating the bios and redoing my overclock once the weather cools off a bit anyways.
Just installed OCZ Agility 3 on the Marvell controller with no issues.
I followed OCZs recommended install: update mobo bios (1801), update drive firmware prior to installing windows (2.11), then fresh W7 install. No issues at all.
However, I didn't save my overclock settings prior to bios flash and now I've forgotten some of them so I'm running at stock clocks atm.
| Intel 2500K @ 5GHz | Noctua NH-D14 | Asus P67 Sabertooth | Samsung 2x4GB DDR3 @ 2133 MHz | Crucial M4 256GB | Asus GTX 770 OC | OCZ Fatal1ty 750W | Qnix QX2710
History: AXP-2400M, AXP-2500M, Core2 E6600 - all minimum 50% overclock
Speedstep disable works with 1801!
No more idling at 1.6GHz!
I'm actually going to enable it, however, since my idle temps are now around 45-50C
| Intel 2500K @ 5GHz | Noctua NH-D14 | Asus P67 Sabertooth | Samsung 2x4GB DDR3 @ 2133 MHz | Crucial M4 256GB | Asus GTX 770 OC | OCZ Fatal1ty 750W | Qnix QX2710
History: AXP-2400M, AXP-2500M, Core2 E6600 - all minimum 50% overclock
Hi Guys,
my friend just bought a new computer with a 2600k and a p67 sabertooth.
we overclocked his processor to 5ghz and 1.45V. But what concern me is that he gets only around 60gigaflop in Linx.... its almost half the speed im getting with mine.
We dont know whats causing this. This is mostly a BIOS Setting but we cant find it.... and you cant seem to disable turbo mode on this motherboard, which is weird.
Can someone with the same motherboard help us??
Thanks.
Asus Maximus Extreme IV
2600k
Tri-Fire 6950
8gb Ram
Vertex 3 Raid 0
Caviar Black Raid 0
You need the SB modified LinX, you'll find it in the first post in this thread, and be prepared to start clocking again on your friends board, SB-LinX will upset any clock done on unmodded LinX: http://www.xtremesystems.org/forums/...nX-Stable-Club
Turbo might seem to be on when you up the multi on this board, but it's not really on, since it does not kick up multi unless you set it to do so by changing upper and lower limits.....
Last edited by Ourasi; 08-24-2011 at 06:36 AM.
| Ci7 2600k@4.6ghz | Asus SaberTooth P67 | Sapphire HD7970 | Samsung B555 32" | Samsung 840 PRO 128gb + 2xIntel SSD 520 120GB Raid0 + 2xC300 64GB Raid0 | Corsair Vengeance 16GB DDR3-1600 8-8-8-24 | Vantage GPU=40250 |
| Ci7 2600k@4.6ghz | Asus SaberTooth P67 | Sapphire HD7970 | Samsung B555 32" | Samsung 840 PRO 128gb + 2xIntel SSD 520 120GB Raid0 + 2xC300 64GB Raid0 | Corsair Vengeance 16GB DDR3-1600 8-8-8-24 | Vantage GPU=40250 |
Guys, could you please help a noob out?
I just bought a new computer, my specs is in my signature.... I just build it and upgraded the Asus Bios firmware to the 1850 version. Im running Windows 7 Ultimate 64 BIT.
I just installed windows 7 ultimate and upgraded all dr... grafics, all asus drivers etc.... but mye system freezes for like 1-2 seconds now and then Both in windows and in games......
I have done the following to try get rid of the problem:
* Placed C3/C6 CPU reports on MB on disabled (as one mentioned on page 1 of this post)
* Upgraded the Intel drivers
* Disabled the overvoltage PLL feature thing (So the computer wakes up from sleep mode)
I read on page 1 of this post that Mem could need a bit more voltage.... Im not very good at overclocking (never done it) so not sure what to set it too... but im ready to give it a try Says on Corsair site that the ram runs with 1.5 volt, and I believe it says so in the bios as well....
Eventvwr gives me an event ID 10 error from time to time, may have something to do with the freezes.... atleast what i get a feeling of reading so many asus owners having the same problem... I just cant read about a fix somwehere....
I know my PSU, RAM and grafic card is ok... I ordered two of each of them to switch if there was something wrong with one of them.... memtest 86 gives me no errors....
Other errors I get, is that the pc often turns itself off and on up to three times before moving forward when restarting or starting the pc.... not often but occasionally.
Anyone could give me a hint on how to fix the freezing? I would be forever thankfull!
When you look at my build, It would be very nice to get some numbers regarding overclocking, voltage settings etc on my MB.... if you got time... maybe that would fix my problem....
(Remember im a noob, so would be nice of you to tell me all I have to change in the Bios, so I dont forget something
THanks tons in advance! Please be so kind to help, paid too much for all this to have it freezing on me
to include
It's most likely the the SF-22xx driven HyperX SSD that are at fault here, you need to go thru some major tweaking to remedy the issues of SF SSD's, visit the OCZ forums for the latest news about this problem...
| Ci7 2600k@4.6ghz | Asus SaberTooth P67 | Sapphire HD7970 | Samsung B555 32" | Samsung 840 PRO 128gb + 2xIntel SSD 520 120GB Raid0 + 2xC300 64GB Raid0 | Corsair Vengeance 16GB DDR3-1600 8-8-8-24 | Vantage GPU=40250 |
Ok, damn... I bought a corsair sf 3 120GB SSD as well... maybe the same error happens with that one then?
Ocz forum? Its a kingston drive im currently running on my system.... Why check out the ocz forums? Can you give me the link?
Major tweaking? Are you sure the SSD is the reason my computer randomly freezes for 1-2 sec?
You can get lucky and not get any trouble, but it's highly unlikely as this problem is with the SF-Controller and it's firmware, and everyone get their FW from SandForce...
OCZ gets Firmwares before anyone else, and the Vertex 3, Kingston HyperX, Patriot Wildfire, Corsair Force 3, Corsair Force GT etc, are all on the same Controller and uses firmwares from sandforce, infact most are twins in different clothes...: http://www.anandtech.com/show/4604/t...-ssds-compared
Here is the link to OCZ forum: http://www.ocztechnologyforum.com/fo...scussion-forum
Start reading about this issue, and going thru the tweaks and workarounds via registry/drivers/bioses/FW etc., I call it major tweaking, as after all, SSD's shouldn't need any to work... What you are describing are symptoms of the SF "syndrome", I'm about as sure as one can be about a PC a million miles away...
Last edited by Ourasi; 08-29-2011 at 02:58 AM.
| Ci7 2600k@4.6ghz | Asus SaberTooth P67 | Sapphire HD7970 | Samsung B555 32" | Samsung 840 PRO 128gb + 2xIntel SSD 520 120GB Raid0 + 2xC300 64GB Raid0 | Corsair Vengeance 16GB DDR3-1600 8-8-8-24 | Vantage GPU=40250 |
Thanks tons man, ill give it a try
Bookmarks