I searched but came up empty handed. Lets get one going
I searched but came up empty handed. Lets get one going
Internal Watercooling Antec 900 Build Log*
WC loop: Black ice extreme 240 radiator, XSPC 120 radiator, HK 3.0, D5 pump with Bitspower top, DD fillport, Primochill tubing, distilled + ptnuke
Pink Floyd is #1
Havent done much testing yet. This is with the Gigabyte 560ti SO.
Thats a nice clock OCNub
i have the giga 560oc card,i put a piece of dice right on the stock heatsink and it goes 1200 @1.21v
Last edited by cowie; 04-14-2011 at 01:23 AM.
_________________
Very nice clocks man!. Thats a good score, especially for 4.45ghz cpu.
Best I have done so far in 03 with a 2500k at 5.4 is 93k. Tried adjusting LOD but doesnt seem to help.
thanks vern i will maybe hard mod and use ln2 one of these days
yep dry ice right on the stock heatsink no fans
@ OC Nub
i did not really try too hard for 03 just using it to heat up the cad for testing.
I'm playing with a few cards atm so i will get back to this card...want to try the msi 560 hawk when it comes out just hope it does ot cost too much.
Last edited by cowie; 04-17-2011 at 02:39 AM.
_________________
ok i will have it sometime at the end of the week.
at the egg now $270usd
http://www.newegg.com/Product/Produc...82E16814127578
i hope it flys like the wind tbh guys
I cant really tell but i think this card has a vrm heatsink like plate on it ...i'll let you guys know soon.
Last edited by cowie; 04-18-2011 at 02:37 PM.
_________________
Any word on the waterblocks? I know hk has a block out anyone else have one?
Internal Watercooling Antec 900 Build Log*
WC loop: Black ice extreme 240 radiator, XSPC 120 radiator, HK 3.0, D5 pump with Bitspower top, DD fillport, Primochill tubing, distilled + ptnuke
Pink Floyd is #1
MSI 560 TI HAWK
just some stock volt overclocking for now.used 3d06 for 3d testing will get it on my other board later.
thing runs 1000 np for 5 passes in o6 3d areas
1.04 vid 100% fan 68f-70f room temps it stays cool..
no other added fans on the card
pushed to 1030 stock volts for two passes did not try more passes or clocks
max core volts with ab is 1.199 with the vid i have
here 1.16v just to burn in and see temps.
will get more testing info and modded bios for 1.21v up if anyone wants it.
max volts with trick 1.30v just software
with a modded bios to 1.21v,1.36v with software np
dont know how it will react but i will see later
_________________
Nice card, 1030 core on stock volts is great.
Looks like the cooler does a good job, this will probably be my next card to try.
Keep the results comming
Has anyone noticed issues with a card downclocking? (like powersaving, but during a Game/Benchmark)
I'm still having this issue in Crysis2. Im not really convinced it is due to instability, as imo - it should crash like it does in other games when instable.. or at least show some image corruption before it does it...
or am I missing something?
I'm not really familiar with these new cards, my last one was a 9800gtx. I have a MSI 560ti, default=880mhz
Is there some documentation on safety features of the 560 - like wehn it dould downclock? Like eg. if the PSU is to weak...
EDIT:
So, im just answering my own question... I replaced the PSU (was 500w) and now the card behaves normally - as in it crashes instead of downclocking .
I think either the psu turned off the 6pin connectors and the card downclocked itself to keep working or the card somehow didn't get enough juice...
Anyways a more powerful psu solved the downclocking issue.
Last edited by Hausmeister; 04-29-2011 at 02:09 PM.
Abit IP35 pro
C2D @ 4ghz
OCZ 8GB
Msi Gtx 560 Ti
Bump lets see more OCs!
| Intel 2500K @ 5GHz | Noctua NH-D14 | Asus P67 Sabertooth | Samsung 2x4GB DDR3 @ 2133 MHz | Crucial M4 256GB | Asus GTX 770 OC | OCZ Fatal1ty 750W | Qnix QX2710
History: AXP-2400M, AXP-2500M, Core2 E6600 - all minimum 50% overclock
Gigabyte SOC card in 3DM05. My best score so far.
Do you guys test these clocks? I mean, can you use them for everyday gaming, or just benching?
I can run it at 1ghz no problem, but its not stable.
It also seems that increasing the voltage does not necessarily improve stability. It increases the temperature however .. and thats also not helping.
I tried up to 1.1v, but... it only heats up the card more.
Best setting I managed is
which seems to be stable for gaming. (1v is default)
Its a MSI Twinfrozr with stock cooler but heatsinks on ram+vrm.
Well maybe It's just not a good card
Abit IP35 pro
C2D @ 4ghz
OCZ 8GB
Msi Gtx 560 Ti
I have only oc'ed the card for benching, not sure what its stable at for gaming. It came with a factory oc of 1000mhz core, and is benchable at 1050mhz @.987v.
eVGA 560Ti SC (900/2100) overclocked to 1000/2400 on stock volts. I've only run 3dmark06 so far. Temps at mid 60s peak, hoping they stay low during 3dmark11 and gaming
| Intel 2500K @ 5GHz | Noctua NH-D14 | Asus P67 Sabertooth | Samsung 2x4GB DDR3 @ 2133 MHz | Crucial M4 256GB | Asus GTX 770 OC | OCZ Fatal1ty 750W | Qnix QX2710
History: AXP-2400M, AXP-2500M, Core2 E6600 - all minimum 50% overclock
P4903 3dmark11
http://3dmark.com/3dm11/1159923;jses...jVcvnWW7k3JehS
29766 3dmark06
http://3dmark.com/3dm06/15695040;jse...hAup8va4Wn6WtT
1000/2400 Mid 70s temp - stock volts.
CPU is at 100x45 at 1.3V - This is all stock cooling
Last edited by dr_sharp; 05-07-2011 at 09:53 AM.
| Intel 2500K @ 5GHz | Noctua NH-D14 | Asus P67 Sabertooth | Samsung 2x4GB DDR3 @ 2133 MHz | Crucial M4 256GB | Asus GTX 770 OC | OCZ Fatal1ty 750W | Qnix QX2710
History: AXP-2400M, AXP-2500M, Core2 E6600 - all minimum 50% overclock
ab beta 3 provides vrm and ram temps now for 560 hawk and other cards with NCT7718W thermal sensors
_________________
Just purchased a Twin Frozr II "Open box", should be here end of this week. Hope I'm not getting burned by buying an open box card, but Newegg's got like 15+ in stock. Any word on how the TwinFrozr II clocks compared to the Hawk? Higher binning on the Hawk?
After a week or so of folding, I was getting some random core shut downs along with some random game crashes while clocked at 1000/2400. I pushed back to 975/2400 and things seem better thus far. I was running fan at 80% and seeing load temps of 60C while folding and 75-80C while gaming... those temps seem reasonable...
| Intel 2500K @ 5GHz | Noctua NH-D14 | Asus P67 Sabertooth | Samsung 2x4GB DDR3 @ 2133 MHz | Crucial M4 256GB | Asus GTX 770 OC | OCZ Fatal1ty 750W | Qnix QX2710
History: AXP-2400M, AXP-2500M, Core2 E6600 - all minimum 50% overclock
Bookmarks