I was wondering why you don't put copper pipes for sli connections and for connections in the bottom of your case?
I was wondering why you don't put copper pipes for sli connections and for connections in the bottom of your case?
Update 13
After long days of filling and sanding the body is ready for paint. I only have to do the sidepanels now and then it can go to the painter.
Last week i also received my new Motherboard Gigabyte P67-A UD5 B3 version
So i installed it with he 2 HD 6970 so i can finish my loop.
And i finished my pump also with the stand and the flow meter.
But first the Case
With my previous Project Umbrella i had to make some holes in the bottom of the case for the drain and some mounting holes.
These are all gone now
Removed all the scratches that i made on the top case
After all the sanding it was time to put the case in to the shower to wash all the dirt off
The pump
Because the i had to turn the pump to put it on th stand i couldnt reach the the bottom to adjust the speed of the pump.
I had to make something so i could still do it. without moving the pump
Drill a hole
Locktide on the screw so it wont move around
Also finished up the stand of the pump.
Like this i can still reach it without moving the pump around
Replaced the power connector so i can plug it directly in to the PSU
Because i couldn't find any white housing for the flow meter i decided to make it white my self
The Motherboard
Installed it on the tray with the HD 6970
Completed a other piece of the loop from CPU to GPU
Tray in the case
I only have to make the connection between the midplate and CPU and then is the loop completed then i can start the sanding and polishing of the pipes
Sponsored by Highflow
Completed Builds
Project Umbrella
Black Obsession
great job
Eager to see more
epic build sir. those copper pipes are gonna look awesome in white.
Today irecieved a package from Marnix AKA UgotHeinzzd
With Commandant nr4 and some extra O-rings for the fittings.
Thanks for the tip and the stuff man ^^
When i came home i immediately started with polishing the pipes
Copper pipes naturel
Copper pipes sanded to 1000 grid.
Copper pipes polished with Commandant nr4.
and the result it is just WAUW ^^
Started with the pipes in the case that where sanded already.
I really love the result of it i am falling in love with it :p
Sponsored by Highflow
Completed Builds
Project Umbrella
Black Obsession
WooW god of Case modding !!!
use of Micro LED white & blue in chassis Body.
Thanks and thanks for the tip but i probably use 2 leds only and they will come in both reservoirs. And maybe some SMD leds on the plexi of the GPU's but that is not sure yet ^^
Looks great!
What fittings are you using to attach the pipes? I've only seen pipe compression fittings from koolance, but yours look like bitspower.
Please please please don't do anything more to those copper pipes, it looks INCREDIBLE!
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Thanks Whiteroom
your right Guilleguillaume
Sorry XC but the pipes will get a coat of nickel. I know they look great like this but they will look even better with nickel around them ^^
^While i am at it i will show u the final pictures of the loop.
I finished the copper pipe loop + all the pipes are prepared to get a nice shiny coat of nickel around them :p
And a picture for the Highflow case badge contest ^^
Sponsored by Highflow
Completed Builds
Project Umbrella
Black Obsession
The copper is outstanding! Great job all around.
Victory May Be Fleeting, But Obscurity Lasts Forever!
Last Project http://www.xtremesystems.org/forums/...d.php?t=213829
Canceled Project http://www.xtremesystems.org/forums/...d.php?t=265292
New Project http://www.xtremesystems.org/forums/...d.php?t=269440
Those pipes do look great...I guess the nickel coating will look great too.
Phenom II 945 (95w)@3.5Ghz
Geil BlackDragon 1066 2x2GB
Gigabyte 790X UD4P
WD 640GB Black
Gigabyte GTX 470
Corsair HX620-Hiper Anubis case
Windows 7 Home 64bit
Samsung 27" monitor
I'm ready to die now.....
I just needed to see this first.....
Raidmax ATOMIC - Core i7 3770s + Corsair H70 // Gigabyte H77N WIFI // Corsair Vengeance 2x4GB 2133mhz // EVGA GTX1060 ACX2.0// Kingston SUV400 480Gb // Sharkoon SFX500L
very beautiful work
SORRY FOR MY BAD ENGLISH!
I got an idea with the copper pipes ..... acid etching .... it'll be gorgeous with some marking ... preferably tribal?
Thanks man
It has to ^^
Lol don't die before u see the end of the build :p
thanks ^^
Looks like a nice idea but don't think it will fit with the rest maybe in a other build ^^
What holds the tube in the fitting? The weight of the tubing + water wont affect how well the fitting "holds" the tube?
Corsair 700D
Intel i7 920 @ 4.20|Asus P6T6 Revolution|G.Skill 6gb DDR3 1600|Zotac GTX480|Intel x-25-M 80GB x 2 / Raid0
H2O
|Perfecting the Obsidian series case. Build log to follow soon...|
Top notch cousin from Belgium
C'est écœurent comme on dits en bon français du Québec
While pipe from gpu blocks till cpu WB looks nice .. why not change it to shorter one that comes from below of gpu waterblocks? This way you'll eliminate top 180degree fitting combo, by what flow restriction should drop.
I thought the copper looked stupid, and then you polished it. Now i want to get some good pipe benders
2rubber sealing that are in the fittings hold the pipes
Atm there are no problems with it but i will keep u guys up to date when i start to fill up the loop :p
Thanks mate
Have bin thinking about it but for that i need to use allot more fittings to get the pipe at a good position. Plus i kinda like how it is now ^^
lol :p
Sponsored by Highflow
Completed Builds
Project Umbrella
Black Obsession
Bookmarks