Is it alright addition Radiator Single 140mm

**ohthatlester** · 03-20-2011, 11:28 AM

I want to add single 140mm Radiator on my case. CPU 30-35c idle and 48c full loads. do you think it will work if I add one more radiator on my computer? and pump can handle? Let me show you some sample the picture.

**ohthatlester** · 03-20-2011, 11:32 AM

If you want to know my specifics system. Please check out my youtube http://www.youtube.com/watch?v=Sy4etSD9YjM

and thumbs up too

**Church** · 03-20-2011, 01:45 PM

It might work, but i'd double check dimensions of rad. Some 1x140 imho might be too wide to fit there.

**ohthatlester** · 03-20-2011, 04:07 PM

Okay, thank you. I know which good size for radiator 1x140.

**XiraN** · 03-20-2011, 04:44 PM

With a 120mm rad (XSPC RS120) on the back, there is about 11mm clearance between the case panel brackets and the rad side on the 800D.

**Levesque** · 03-20-2011, 05:01 PM

Yes, it will work. Here's my EK 140mm with dual 120mm fan in push-pull with 140/120mm adaptors. It works. And only 1 pump.

**m0r7if3r** · 03-20-2011, 05:39 PM

oh man...that's sweet leves

**Serpentarius** · 03-20-2011, 06:09 PM

draw the dimension on the piece of newspaper, cut it up, use cellotape and see if the size fits.
Sometimes it's better to have a mock-up design like these

**fatherTime27** · 03-20-2011, 07:11 PM

Why not just use a 120mm?

**defect9** · 03-20-2011, 10:41 PM

because 140 goes to 11.

**Conumdrum** · 03-21-2011, 03:04 AM

Why would you add more rad? Your temps are way good. And adding a 140 will make very little change in your DT temps. Your CPU might go down 2-3C max, thats all.

And adding a rad to the back in exhaus will restrict the rad on top, and impact your case flow unless you want loud fans on the rad.

You don't need it... at all.

**penguins** · 03-21-2011, 03:05 AM

Xtreeeeeeeeeeeeeeeeeeeeem!

**Waterlogged** · 03-21-2011, 09:34 AM

Originally Posted by Conumdrum

Why would you add more rad? Your temps are way good. And adding a 140 will make very little change in your DT temps. Your CPU might go down 2-3C max, thats all.

And adding a rad to the back in exhaus will restrict the rad on top, and impact your case flow unless you want loud fans on the rad.

You don't need it... at all.

**NaeKuh** · 03-21-2011, 09:45 AM

Originally Posted by Conumdrum

Why would you add more rad? Your temps are way good. And adding a 140 will make very little change in your DT temps. Your CPU might go down 2-3C max, thats all.

And adding a rad to the back in exhaus will restrict the rad on top, and impact your case flow unless you want loud fans on the rad.

You don't need it... at all.

he's at that stage in LC, where u absolutely must tweek it, regardless of what gains u get..

Ummm.. he wont get to where u and i think until he's tore his system apart at least 3 more times.

**ohthatlester** · 03-22-2011, 04:49 PM

Originally Posted by Levesque

Yes, it will work. Here's my EK 140mm with dual 120mm fan in push-pull with 140/120mm adaptors. It works. And only 1 pump.

wow impressived!

**ohthatlester** · 03-22-2011, 04:51 PM

Originally Posted by Serpentarius

draw the dimension on the piece of newspaper, cut it up, use cellotape and see if the size fits.
Sometimes it's better to have a mock-up design like these

brilliant idea!

**ohthatlester** · 03-22-2011, 05:03 PM

Originally Posted by Waterlogged

Why would you add more rad? Your temps are way good. And adding a 140 will make very little change in your DT temps. Your CPU might go down 2-3C max, thats all.

And adding a rad to the back in exhaus will restrict the rad on top, and impact your case flow unless you want loud fans on the rad.

lol? is that true?

Thread: Is it alright addition Radiator Single 140mm

Thread Tools

Search Thread

Rate This Thread

Display

Is it alright addition Radiator Single 140mm

Bookmarks

Bookmarks

Posting Permissions