D9's 6-6-6 1800+ no way......

[[XC] Oj101]

Wow, if it's too high for his nerves it's 220v straight from the wall

[Jacka]

How much D9 do you have left?

[chew*]

How much D9 do you have left?

You can never have enough D9's.

It's like Blue Oyster Cult's "Don't Fear The Reaper" and cowbell, you just gotta have more cowbell. No such thing as to much cowbell.

[Don_Dan]

You can never have enough D9's.

Those are some very wise words, Sir.

sigged.

[Manicdan]

how do you guys tweak ram, is it really as simple as droping a timing down one notch and run memtest for a few minutes and repeat?
or am i doing it the hard way

[Hondacity]

Those are some very wise words, Sir.

sigged.

you and chew are so ram'in it

how do you guys tweak ram, is it really as simple as droping a timing down one notch and run memtest for a few minutes and repeat?
or am i doing it the hard way

sp32 or hyperpi

[BeepBeep2]

M beir made me take a vow of silence?

I'll take a guess, 2.55-2.7v considering the board lets you go up to 2.8 without vmods
That's crazy

I corrupted my OS last night running 32M at 1760 6-6-6-18, gonna keep pushin. Don't think these 1600 C8 sticks of very good bin.

[cdawall]

I'll take a guess, 2.55-2.7v considering the board lets you go up to 2.8 without vmods
That's crazy

I corrupted my OS last night running 32M at 1760 6-6-6-18, gonna keep pushin. Don't think these 1600 C8 sticks of very good bin.

over 2.4v didn't do anything on mine

[chew*]

I'll take a guess, 2.55-2.7v considering the board lets you go up to 2.8 without vmods
That's crazy

I corrupted my OS last night running 32M at 1760 6-6-6-18, gonna keep pushin. Don't think these 1600 C8 sticks of very good bin.

board stops at 2.5.....no clue where you came up with 2.8.

[DexNfX]

Wow Chew that very nice settings!

[cdawall]

board stops at 2.5.....no clue where you came up with 2.8.

i thought it went up to 2.8 as well maybe BIOS?

[chew*]

i thought it went up to 2.8 as well maybe BIOS?

Maybe with overvolt enabled but that usually applies to cpu and NB vid only......

Doesn't matter, I can assure you more than 2.4 is preety useless on all micron least on AMD rigs.

Last thing I usually touch is voltage, all about the tuning.

The set I used for first run was 1600 c7 SPD........

[cdawall]

Maybe with overvolt enabled but that usually applies to cpu and NB vid only......

Doesn't matter, I can assure you more than 2.4 is preety useless on all micron least on AMD rigs.

Last thing I usually touch is voltage, all about the tuning.

The set I used for first run was 1600 c7 SPD........

well at least i came to the same conclusion as you anything over 2.4v crashed on me more than it worked

[BeepBeep2]

board stops at 2.5.....no clue where you came up with 2.8.

The manual as well as reviews.

[cdawall]

The manual as well as reviews.

must be with extreme overvolt enabled or they tuned it down with a BIOS i will boot mine up and check tho

[Manicdan]

the only way i could see pushing 2.8v into DDR3 is someone needed a light and ran out of matches.

[BeepBeep2]

the only way i could see pushing 2.8v into DDR3 is someone needed a light and ran out of matches.

I put 2.2 into my good set of hypers (2000 C7) for about a minute once by accident...no flames, no degrade even, they still all do 1860 6-6-6 benchable.

I believe hipro (iirc, cant remember) put smth like 3v into a pair of hypers and they still live

[[XC] Oj101]

I'd love to find that thread (or post, if there was one) I know it was completely by accident, and yes it was our beloved George

[cdawall]

I'd love to find that thread (or post, if there was one) I know it was completely by accident, and yes it was our beloved George

lol woops from him only ram i have been crazy with was DDR2 D9DCD's and i pushed 3.5v through them on a crosshair II as a matter of fact lol just FYI phenom IMC's get mad when you do that poor 720BE i had croaked

3.26v

http://img.techpowerup.org/090217/Capture047.jpg

3.5v and dead 720BE

http://img.techpowerup.org/090214/Capture046301.jpg

[Don_Dan]

how do you guys tweak ram, is it really as simple as droping a timing down one notch and run memtest for a few minutes and repeat?
or am i doing it the hard way

Yes, MemTest all the way...

I believe hipro (iirc, cant remember) put smth like 3v into a pair of hypers and they still live

There isn't even a board that can feed DDR3 with 3V as far as I know. It was ~2.5V.

I'd love to find that thread (or post, if there was one) I know it was completely by accident, and yes it was our beloved George

Yes it was him, and I also found the post since the last time I told you about that accident.

Click.

[BeepBeep2]

Yes, MemTest all the way...



There isn't even a board that can feed DDR3 with 3V as far as I know. It was ~2.5V.



Yes it was him, and I also found the post since the last time I told you about that accident.

Click.

I...lol, I just very faintly remembered that post, that was a loooonnnng time ago.

[[XC] Oj101]

cdawall were those old Fat Bodies? It was awesome running them at like 2.85v without a worry in the world

[cdawall]

cdawall were those old Fat Bodies? It was awesome running them at like 2.85v without a worry in the world

yup

[Don_Dan]

Those chips are not Fat Bodies.

They're 12x12.5 mm in size, Fat Bodies are 11x19 mm.

[BeepBeep2]

chew's got competition. I just booted a (very) dirty copy of Vista Home Premium at 1806 6-6-6-18 @ 2.34v

32M will most likely need a bit of patience.