MSI Afterburner 2.1.0 Final is out

[zalbard]

Wasn't sure about the best section to post this in... Please move if necessary!
Comes bundled with MSI Kombustor 2.0.0.
Download @ http://downloads.guru3d.com/

[Kristoferr]

Just tried on HD 5970. Does not recognise memory voltage and cant adjust that. Still have to use ati overvolt tool for it.

[Hondacity]

Just tried on HD 5970. Does not recognise memory voltage and cant adjust that. Still have to use ati overvolt tool for it.

what bios are you using? is your gpu from msi?

[VIP3R]

Thanks for the headsup, will try it after work.

[Kristoferr]

what bios are you using? is your gpu from msi?

XFX HD 5970 BE 2GB version. Not MSI.

[kaktus1907]

more performance too

- Reduced On-Screen Display rendering related CPU performance hit due to more
effective geometry batching in On-Screen Display 3D rendering mode codepath

- Screen capture implementation is now multithreaded to minimize the impact on
the game performance when saving screenshots on the systems with multicore
CPUs

- Fixed issues causing the On-Screen Display to be rendered in wrong colors
in 3D mode in some multitextured Direct3D9 applications (e.g. several
bumpmapping related samples from DirectX 9 SDK)

cant find built-in benchmark though

[zalbard]

I think they are talking about Kombustor.

[Detection]

Still sucks, it can not OC my 6850 past 850mhz

I have to use Sapphire Trixx to get 940Mhz

[zalbard]

Still sucks, it can not OC my 6850 past 850mhz

I have to use Sapphire Trixx to get 940Mhz

See this.
To unlock voltage use this.
And you're set.

[C-N]

Still sucks, it can not OC my 6850 past 850mhz

I have to use Sapphire Trixx to get 940Mhz

& click settings then enable over voltage etc.... if you havent already

[C-N]

MSI Kombustor not working?..... D3DCompiler_42.dll missing????

Install optional DX components

http://www.microsoft.com/downloads/e...a-9b6652cd92a3

[Arctucas]

When running Kombustor, it appears to only be using the primary gpu, even though I have SLI enabled.

How may I get Kombustor to utilize both cards?

[Johnny87au]

Easy solution, use furmark or re roll

[Arctucas]

Easy solution, use furmark or re roll

"re roll"?

EDIT:

FurMark (1.9.0) also only uses the primary unless I rename it to etqw.

[Johnny87au]

re roll back to previous msi version

[Lanek]

Just tried on HD 5970. Does not recognise memory voltage and cant adjust that. Still have to use ati overvolt tool for it.

You can't overclock out o the box with MSIA on AMD cards.

- Open Cfg sys of Afterbuner, fine the line " enableunofficialoverclockng" set = 1

- Open MSI Aferburner > settings > check " allow voltage control " and " apply to all GPU same settings ".


If your system lock when apply voltage.

Go in win registry: find the 2 drivers folders for your cards (0001 and 0000 ) and the line "enableULPS" an change the vaule =1 to = 0 (hexadecimal )
This setting put in extra low power mode the second gpu ( it show 000mhz ) but when you OC with MSIA, if this function is enabled, the voltage change will be apply to card who are not powered . so the lock.

Anyway the last 2 beta and this official don't allow me to OC my 5870 pass CCC limit... work fine with other old version, but now it show me 900mhz max ..( the soft don't disable this limit for an unknow reason, back to an older version )

When running Kombustor, it appears to only be using the primary gpu, even though I have SLI enabled.

How may I get Kombustor to utilize both cards?

They was a bug with SLI with Kombustor if you don't use the full screen resolution and the resolution don't match it... the driver don't understand you wil launch a 3D appliccation. try this or go back on previous version.

[C-N]

You can't overclock out o the box with MSIA on AMD cards.

- Open Cfg sys of Afterbuner, fine the line " enableunofficialoverclockng" set = 1

- Open MSI Aferburner > settings > check " allow voltage control " and " apply to all GPU same settings ".

You also need to add the bold text to the new EULA line above unofficial overclocking.

UnofficialOverclockingEULA

I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it

[Leeghoofd]

Anyway the last 2 beta and this official don't allow me to OC my 5870 pass CCC limit... work fine with other old version, but now it show me 900mhz max ..( the soft don't disable this limit for an unknow reason, back to an older version

Works perfectly fine here passed 900Mhz, maybe some corrupt install file ?

[Lanek]

You also need to add the bold text to the new EULA line above unofficial overclocking.

UnofficialOverclockingEULA

I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it

........... a guy have respond this to me in another forum, i have think he was joking..


yes just add this " text:" on this line was enough ... working now .

[C-N]

@ Lanek

Lol a little unusual maybe but once you get it going its a fantastic tool/app I'm glad you got it sorted buddy.

[PatRaceTin]

I will try

[Lanek]

@ Lanek

Lol a little unusual maybe but once you get it going its a fantastic tool/app I'm glad you got it sorted buddy.

thanks to you

[Detection]

See this.
To unlock voltage use this.
And you're set.

Thank you very much

All unlocked and working now.

1 weird issue, not a real problem, but with my VRAM set to 1100, I can not OC the Core, it jumps back to 775mhz

With the VRAM at either 1099mhz or 1101mhz - it lets me set my Core to 940mhz

Strange, so have set it to 1101Mhz

[Arctucas]

re roll back to previous msi version

I understand, I had never heard that term until now.

[Arctucas]

<SNIP>

They was a bug with SLI with Kombustor if you don't use the full screen resolution and the resolution don't match it... the driver don't understand you wil launch a 3D appliccation. try this or go back on previous version.

OK, I set Kombustor to match my screen resolution (1920x1200), checked the Fullscreen box, and it still only uses the primary GPU.