Gskill F3-17000CL8-D

[Dumo]

Special thanks to Paypal and runmc

http://www.xtremesystems.org/forums/...d.php?t=266687

Retail from Newegg with UD7 bios F7f





Default...




@ 1.66 Vdimm...





Max and jolted it with 1.7 Vdimm...probly not the ram max, but my 2600K can't climb the 2.8Ghz wall

[Dumo]

I will try with 53X...see where this gonna end

[Johnny87au]

Awesome results dumo, im jealous of that chip you have, Whats the batch mate ??

[Dumo]

Awesome results dumo, im jealous of that chip you have, Whats the batch mate ??

L042B243, but don't go by batch when you want to pick one. Imo Its pure luck and quantity from random batches

[Johnny87au]

Thanks, Yeah i was told last 4 numbers are ideally what you look for in a good batch...

[Dumo]

53X...default subs

I still have 52Mhz to go before this cpu run out of Mhz..Lol

[bito]

Will these do tight timings at 1600mhz too, i.e 6-8-6-24 1T at 1.5v ?
Looking for some sticks that will cover a wide range

[[XC] Oj101]

Am I the only one seeing this for EVERY ImageShack image today?

[C-N]

@ Dumo, awesome chip & bclk man

Will these do tight timings at 1600mhz too, i.e 6-8-6-24 1T at 1.5v ?
Looking for some sticks that will cover a wide range

They do tight fine, I've not maxed mine but have had them up to 1950 6.8.6 cant help on the voltage though as I've not tried lower than 1.6

Edit.... ye they run 1600 6.8.6.20.1T @ 1.42v Bios

[bito]

Ordered
The RipJaw PC3-12800C6 do the same at 1.42v, 1600, but these seem to offer more at the top end due to binning, i guess.

Thanks for your response.
Much appreciated.

[C-N]

Ordered
The RipJaw PC3-12800C6 do the same at 1.42v, 1600, but these seem to offer more at the top end due to binning, i guess.

Thanks for your response.
Much appreciated.

You're welcome

I think they are a fantastically flexible kit of RAM

1600 7.8.7.20.1T also runs fine @ 1.32v

Edit... They also run 1600 7.7.7.20.1T didnt test voltage & 1600 6.7.6.20.1T @ 1.42v

[Alex-Ro]

What is the maximus CAS6 results and also are they 32M stable at 2133 7-9-6?

[chew*]

What is the maximus CAS6 results and also are they 32M stable at 2133 7-9-6?

They are prime stable at 7-9-7 2133....or at least my set is which is identical model.

[PolRoger]

I've been considering a new Ripjaws kit... does anyone know if the ic used for this kit: GSkill F3-17000CL8-D (~ $160) are the same as those used for this one: GSkill F3-17600CL7D-4GBXHD (~ $150)? Since the CL8 kit is priced higher does it have the better bin?

[chew*]

I've been considering a new Ripjaws kit... does anyone know if the ic used for this kit: GSkill F3-17000CL8-D (~ $160) are the same as those used for this one: GSkill F3-17600CL7D-4GBXHD (~ $150)? Since the CL8 kit is priced higher does it have the better bin?

I have seen 6-9-6 results with the C7 kit, I haven't with the C8 kit or at least not anything remotely what i would call stable, like say 32m.

[PolRoger]

I have seen 6-9-6 results with the C7 kit, I haven't with the C8 kit or at least not anything remotely what i would call stable, like say 32m.

Do you know it they are different ic? I wonder why the C7 kit is $10 less while the 2200 speed C9 GSkill kit has the same price as this 2133 C8 kit?

[chew*]

No clue really.

I only have the C9 2133 8 gig here and the C8 2133 4g here to review which I need to get cracking on, was held up due to bclk limited cpu's for a bit there.

Pros findings were preety similar to what I found, c6 2133 not really gonna happen.

My testing consists of prime blend for ram reviews only. 32m is misleading least for 24/7 users, usually can run that 50 mhz higher.

[C-N]

@ PolRoger

Mine run 2133 32M @ 6.9.6.20 but need lots of volts 1.78!!

I'm not very good at Pi but I cant make 6.9.6 any quicker than 7.9.7 anyway so for me 6.9.6 is a waste of time.

[Dumo]

If I'm not mistaken Pros mentioned that trcd 9 ram is more binned than Cas7-10 ones

I just don't wanna bother with os/bios corruption when trying to go 6-9-6-24.

[chew*]

If I'm not mistaken Pros mentioned that trcd 9 ram is more binned than Cas7-10 ones

I just don't wanna bother with os/bios corruption when trying to go 6-9-6-24.

Yah I wouldn't bother dumo, not worth it.

[stasio]

I've been considering a new Ripjaws kit... does anyone know if the ic used for this kit: GSkill F3-17000CL8-D (~ $160) are the same as those used for this one: GSkill F3-17600CL7D-4GBXHD (~ $150)? Since the CL8 kit is priced higher does it have the better bin?

Seems to be only kit with BBSE(even are EOL),according to this post:
http://www.xtremesystems.org/forums/...d.php?t=264783
post#19
Btw,I doubt between this kit and Corsair CMT4GX3M2A2133C9, 9-10-9-27 at 1.5V.

[Alex-Ro]

Well we have to see a naked 2133 8-9-8 kit in order to see the chips

[C-N]

Well we have to see a naked 2133 8-9-8 kit in order to see the chips

Mine are plain.... they look just like any other GSkill IC & say nothing on them except E904A88R9401

They look just like PatRaceTin IC's

http://www.xtremesystems.org/forums/...62&postcount=1

[Rone]

Mine are plain.... they look just like any other GSkill IC & say nothing on them except E904A88R9401

My guess is that all those blank ICs with 'E9xxxxxxxxxx' on them are Powerchip ICs, bought and relabeled by Elpida.
Not 100% sure about this, but everything about them seems to point in that direction.

[Dumo]

28K

Subs...TRC 36, TRRD 4 and TRFC 74 @ 1.7Vdimm