Source: http://www.fudzilla.com/
Nice and fresh design, great performance. I like it already!
Please post more reviews with extra numbers if you find them. This is mostly for pictures and preliminary results.
Source: http://www.fudzilla.com/
Nice and fresh design, great performance. I like it already!
Please post more reviews with extra numbers if you find them. This is mostly for pictures and preliminary results.
I really like that. I don't especially need my memory cooled (though others here surely do), but on a lot of boards it may save you from requiring a fan pointed at another chip on the motherboard and I can appreciate that.
Now if they can just partner with someone to create a motherboard without a 24-pin power slot right under one of those wings...
Dual CCIE (Route\Switch and Security) at your disposal. Have a Cisco-related or other network question? My PM box is always open.
Xtreme Network:
- Cisco 3560X-24P PoE Switch
- Cisco ASA 5505 Firewall
- Cisco 4402 Wireless LAN Controller
- Cisco 3502i Access Point
Ram changes are going to mean HSF removale and refit = involvment!
They should have made the front HS high enough for dual fans, which also would make RAM change easier.
You'd only need to remove the lower fan instead of the whole HS.
super Huge
Intel Core i5 6600K + ASRock Z170 OC Formula + Galax HOF 4000 (8GBx2) + Antec 1200W OC Version
EK SupremeHF + BlackIce GTX360 + Swiftech 655 + XSPC ResTop
Macbook Pro 15" Late 2011 (i7 2760QM + HD 6770M)
Samsung Galaxy Note 10.1 (2014) , Huawei Nexus 6P
[history system]80286 80386 80486 Cyrix K5 Pentium133 Pentium II Duron1G Athlon1G E2180 E3300 E5300 E7200 E8200 E8400 E8500 E8600 Q9550 QX6800 X3-720BE i7-920 i3-530 i5-750 Semp140@x2 955BE X4-B55 Q6600 i5-2500K i7-2600K X4-B60 X6-1055T FX-8120 i7-4790K
next revision: bigger fins; dual fan support on both heatsinks; temps reduced by 0.5°C...
seriously my good old TRUE from 2007 is still in the same league as these new coolers; air cooling and watercooling have hit a wall and upgrading isn't worth it anymore....
Core i7 2600k|HD 6950|8GB RipJawsX|2x 128gb Samsung SSD 830 Raid0|Asus Sabertooth P67
Seasonic X-560|Corsair 650D|2x WD Red 3TB Raid1|WD Green 3TB|Asus Xonar Essence STX
Core i3 2100|HD 7770|8GB RipJawsX|128gb Samsung SSD 830|Asrock Z77 Pro4-M
Bequiet! E9 400W|Fractal Design Arc Mini|3x Hitachi 7k1000.C|Asus Xonar DX
Dell Latitude E6410|Core i7 620m|8gb DDR3|WXGA+ Screen|Nvidia Quadro NVS3100
256gb Samsung PB22-J|Intel Wireless 6300|Sierra Aircard MC8781|WD Scorpio Blue 1TB
Harman Kardon HK1200|Vienna Acoustics Brandnew|AKG K240 Monitor 600ohm|Sony CDP 228ESD
That looks good, and those 2 x 140mm, and 6 heat pipes would probably keep the CPU very cool too, but (big butt ) you are going to get hot air all over the place.
EDIT:
I like the concept tho, you get a tween-tower without feeding the hot air directly into the other fan.
If you have a top exhaust-fan too, then turning the horizontal fan (to pull), can be a solution. But that would feed the hot air into other fan, and the whole concept would fall apart. They should have a tiny separation-wall in the middle, between tow fans, or something similar. Anyways. you don't want that air all over the place.
Last edited by Sam_oslo; 02-16-2011 at 08:16 AM.
► ASUS P8P67 Deluxe (BIOS 1305)
► 2600K @4.5GHz 1.27v , 1 hour Prime
► Silver Arrow , push/pull
► 2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
► GTX560 GB OC @910/2400 0.987v
► Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
► CM Storm Scout + Corsair HX 1000W
+
► EVGA SR-2 , A50
► 2 x Xeon X5650 @3.86GHz(203x19) 1.20v
► Megahalem + Silver Arrow , push/pull
► 3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
► XFX GTX 295 @650/1200/1402
► Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
► SilverStone Fortress FT01 + Corsair AX 1200W
Has some looks to it.
But I believe it will only serve to increase the ram temps .
That and having to remove the heatsink to take out your mem would be quite the hassle.
If you have a side intake, then turning it to exhaust, and turning the horizontal fan too pull too, could be a good option. You still need to put a little separation-wall between those 2 fans for best result tho.
This can be a good option, in a good ventilated case:
Intake: top (to feed vertical fan) + front (to feed horizontal fan), this should stay high.
Exhaust : side (to exhaust the horizontal pull-fan) + back (to exhaust the vertical push-fan)
With a little separation-wall between tow fans.
Last edited by Sam_oslo; 02-16-2011 at 08:38 AM.
► ASUS P8P67 Deluxe (BIOS 1305)
► 2600K @4.5GHz 1.27v , 1 hour Prime
► Silver Arrow , push/pull
► 2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
► GTX560 GB OC @910/2400 0.987v
► Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
► CM Storm Scout + Corsair HX 1000W
+
► EVGA SR-2 , A50
► 2 x Xeon X5650 @3.86GHz(203x19) 1.20v
► Megahalem + Silver Arrow , push/pull
► 3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
► XFX GTX 295 @650/1200/1402
► Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
► SilverStone Fortress FT01 + Corsair AX 1200W
An other review here:
http://www.computerbase.de/artikel/g...s-cpu-kuehler/
Mounting system is nice and solid.
But its a Cooler Master V10 look a like.
Asus Laptop
I like it, but it will make removing RAM a chore on sticks with oversized sinks.
PII 965BE @ 3.8Ghz /|\ TRUE 120 w/ Scythe Gentle Typhoon 120mm fan /|\ XFX HD 5870 /|\ 4GB G.Skill 1600mhz DDR3 /|\ Gigabyte 790GPT-UD3H /|\ Two lovely 24" monitors (1920x1200) /|\ and a nice leather chair.
Make a hole on the back of the case and turn it 180. Cool and RAM access free.
looks like Silver Arrow with one side laid-down
Gaming rig;
ASUS RAMPAGE IV BLACK EDITION
I7-4390K
G.SKILL Trident X 16GB 2400
Intel 530 240GB
2x Asus GTX780
Corsair AX1200
HP ZR30w 30
Win 8.1 pro
Sound rig;
Auzen X-Fi H.T. HD --> Yulong D100 MKII --> D-7100
You could swap out overclocked DDR3 1600 CL7 G.Skill eco's but that's about it for "performance ram".
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
Nice with 2 fans it should cool ram as well. I like it, changing ram is gonna be a pain sadly but I think I can live with that.
MEH, performance is not worth the extra design. If you are going to have something that looks like that, it better outperform the competition, which it does not.
does no one make a heatsink thats like the gemini 2 but facing upward so that you can still see and access the RAM, but all air goes up to the top of the case where big fans generally are
2500k @ 4900mhz - Asus Maxiums IV Gene Z - Swiftech Apogee LP
GTX 680 @ +170 (1267mhz) / +300 (3305mhz) - EK 680 FC EN/Acteal
Swiftech MCR320 Drive @ 1300rpms - 3x GT 1850s @ 1150rpms
XS Build Log for: My Latest Custom Case
Bookmarks