i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
124 is generall vccio related "VTT".. try adjusting it and bump up system agent a tiny bit..Should do the trick!
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
Sorry if it's sound noob, but what about when it is just freezing? (no BSOD) temps too high?
Thanks for the guide... sticky?
Main Rig
Gigabyte z78x-OC Bios F5n
i7-4770k batch L310B492 Malay @ 4.5ghz with HT 1.2v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn
HiS ATI HD 6950
Corsair Force GT 120 GB Sata3 SSD (boot drive) on Intel sata3 controller port0
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port1
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port4
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Suppreme HF Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Server
HAF 932
Gigabyte z77x-UD3H F13
i7-3770S batch 3212B621 supports VT-D and low power
32GB 4x8gb Muskin Enhanced Blackline 10-10-10-27@1.65v
Vmware vSphere ESXi 5.0u1
4x500GB Hitachi Deskstar 7K1000.D Raid 10 on a IBM M1015 <- DataStore
Sapphire HD 5850
0x 124 is definitely not VTT. Bumped Vtt and still got one. It passes IBT, LinX and will BSOD 0x124 idle or surfing. 2500k didn't do this, extremely frustrating.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
It's not vCore, specially when you are using manual vCore. Because when it passes IBT, LinX, then shouldn't BSOD at idle.
It's not you RAM either. Because it's working fine with 2500k, assuming you are using the same RAM and settings.
The next candidate, and most probable source of problem is the IMC.
If that 2500K is doing fine wiht same MB and same RAM, with same settings, then probably the problem is the IMC of your 2600k.
Adding more VVT/VCCIO should help, but UnCore runs at the same speed as Core on SB, and some IMCs seams to be having problems at x50+, no matter how much juice they get.
Last edited by Sam_oslo; 02-21-2011 at 01:20 PM.
► ASUS P8P67 Deluxe (BIOS 1305)
► 2600K @4.5GHz 1.27v , 1 hour Prime
► Silver Arrow , push/pull
► 2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
► GTX560 GB OC @910/2400 0.987v
► Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
► CM Storm Scout + Corsair HX 1000W
+
► EVGA SR-2 , A50
► 2 x Xeon X5650 @3.86GHz(203x19) 1.20v
► Megahalem + Silver Arrow , push/pull
► 3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
► XFX GTX 295 @650/1200/1402
► Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
► SilverStone Fortress FT01 + Corsair AX 1200W
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
I ordered another CPU. Found others with the same issue, it just seems to be that some of these are plagued with it.
I dont want to deal with this, a week stable then 4 BSODs in an hour. Its ridiculous. I believe it's something with the chip itself.
All the hardware is the same, I swapped CPUs. Even reinstalled the OS last night in case it was something with the software or a driver. Had 3 today in an hour. been fine the last few hours though, its really random.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Now this thread is going to come in very handy sooner or later.
/_/_/_ | Intel Core i7 920 @ 4.2GHz | Swiftech Apogee GTZ | Gigabyte EX58-UD5 | CORSAIR DOMINATOR 6GB DDR3 1600 | 2 x ATI 4850 Crossfire Enabled | WD Velociraptor 300GB | Creative Sound Blaster X-Fi Titanium Fatal1ty Pro | Corsair HX1000W | Antec P182 | _\_\_\
Nice thread and good guide!!!
Nice thread, but does it hold true for the LGA775 platform as well? If so, what voltages in the LGA775 platform are equivalent (for these purposes) to the QPI/VTT voltages?
Main Rig
Gigabyte z78x-OC Bios F5n
i7-4770k batch L310B492 Malay @ 4.5ghz with HT 1.2v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn
HiS ATI HD 6950
Corsair Force GT 120 GB Sata3 SSD (boot drive) on Intel sata3 controller port0
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port1
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port4
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Suppreme HF Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Server
HAF 932
Gigabyte z77x-UD3H F13
i7-3770S batch 3212B621 supports VT-D and low power
32GB 4x8gb Muskin Enhanced Blackline 10-10-10-27@1.65v
Vmware vSphere ESXi 5.0u1
4x500GB Hitachi Deskstar 7K1000.D Raid 10 on a IBM M1015 <- DataStore
Sapphire HD 5850
Guys two days now i have BSOD 0x00000124 error code with 2500K on P67A-UD4 when everything is deafult...
I didn't have this problem before... when i change the Vcore from Auto to normal or I set it manualy to 1.22 (which is the normal) everything is ok!
I changed bios,I cleared Cmos...same problem
The problem is the too low Vcore for sure!
My question is... this problem is problem with cpu or with M/B?
Main Rig
Gigabyte z78x-OC Bios F5n
i7-4770k batch L310B492 Malay @ 4.5ghz with HT 1.2v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn
HiS ATI HD 6950
Corsair Force GT 120 GB Sata3 SSD (boot drive) on Intel sata3 controller port0
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port1
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port4
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Suppreme HF Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Server
HAF 932
Gigabyte z77x-UD3H F13
i7-3770S batch 3212B621 supports VT-D and low power
32GB 4x8gb Muskin Enhanced Blackline 10-10-10-27@1.65v
Vmware vSphere ESXi 5.0u1
4x500GB Hitachi Deskstar 7K1000.D Raid 10 on a IBM M1015 <- DataStore
Sapphire HD 5850
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
Got this often overclocking my 2 gpu-s, so what to increase with a SB setup?
any idea what 7F code means ? i7 Bloomfield .
Look for memory issues... timing,voltage etc
My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!
thanks for your help
I was getting idle bsods, surfing in youtube etc..watching movies, gave a sudden x124 and x101, usually x124, disabled c3 and c6 never had problem since.
@i5 2500k / 4,5ghz,Vcore 1.32 - Sabertooth P67 B3(1606 BIOS), 8GB Ripjaws X 1600mhz CL9, HD 6950 2GB(unlocked shaders)
got code 124 when i enabled the XMP profile for my ripjaws , during gameplay comp froze up and BSOD.. Thru my Mushkins back in and viola! works perfect .. Little upset about the ripjaws not doing their job ,prob a bad stick or something.
HEATWARE
x58-UD5 ▀▄ i7 950 4.0Ghz ▀▄ ZOTAC GTX 580 ▀▄ Mushkins 1600Mhz
been clocking my 2500K a bit these last days and my experience is that 0x124 is definitely not VCCIO (QPI/VTT) related but just a matter of too little vCore.
- Asus P8P67 PRO
- i5 2500K - L103A965
- Intel Postville X25-M 80Gb SSD
- MSI HD6950@6970
- Thermaltake Toughpower 750W.
- EK Supreme HF Full Copper
- Laing DDC3.2 /w Petrastech top
- Feser Xchanger 360mm
Bookmarks