Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
I havent pushed BCLK yet as I havent needed to, I think my current rams should do 108 at 2133 ... it might give me a boost in 3D11 but SB-E owns me anyway
SB-E is too expensive here, I will stick with cheap and powerful SB then go Ivy when it comes out.
I might go back to water with these and use them more.
:-)
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
It's cool mate, I'm blaming my motherboard and my lack of advanced tuning skills rather than your CPU
The last settings I tried went into endless part post loop so I will try again tonight (about 11 hrs from now)
I just want to see that 57x and save it as benching settings then work on rams and benching scores
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Did you own this CPU also?Originally Posted by andressergio
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Oh lucky you, when Ivy comes out then we start the process all over again..... Looking for batch patterns and better clockers
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
jesus i would never thought that would be so hard to make the 16GB 2000 9-11-9-27 1T @ 2133 9-11-9-27 1T prime stable
needed to down PLL to 1,6ish...up vcore some notches
Uploaded with ImageShack.us
low PLL was the key. this is my beloved x56 chip, but he dont like much VTT or PLL, pity that for 16GB i have like 1.45+ idle and 1.44 load
inside ma room was 24C and outside hell summer but AC not pointing to rad or pc
i repeated 2 times this test to be sure one hour each to see if its consistent, as i found that sometimes i primed passed 3 hours and then i do it again and failed on mins...
now im letting it go a bit further
Uploaded with ImageShack.us
cheers to all
Sergio
Last edited by andressergio; 01-31-2012 at 03:07 PM.
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Right guys, I'm having some problem with my board I think.
I instaled it just today and by mistake I touched the ROG heatsink around the CPU and almost burn myself. I wonder is that normal?
I then decided to use one of the temp probes that came in the box. I took one and then just placed it insidie the heatsink to see what themp it will show.
Now I was playing BF3 and as you can see there is that emergency auto-shut if it goes upto 70* set by me. It happened, it actually reached 70*C ! (no oc, idle)
It really worries me.
btw. My new system.
By the place you have those "7970's?", you are activating nf200 chip, wich happens to be cooled just down the rog hs, and also is a warm-working chip. I strongly recomend you to use those cards in 1 and 3 pci-e, avoiding this way that chip, and most likely you'll have better performance.
BTW: Congrats, nice setup there.
Last edited by FedericoUY; 02-11-2012 at 01:26 PM.
Just got a Maximux IV Extreme-Z with a 2600K. I'm Novice @ OC. Looking to learn, looks like a nice thread
I picked up the M4E P67 board to try this weekend. I went back to the Gigabyte Z68XP-UD5 after 3 days on this. This thing just doesnt seem to clock as well, maybe its me, or maybe i just got a bad board idk.
hey guys, just popping in to check on things. how's the latest bios for this board? i haven't flashed mine since 2001 bios and was wondering if there's been any notable upgrades. thanks!
i5 2500k + Thermalright Archon (4.5GHz 1.352V)
Asus MIV E
G.Skill F3-14900CL9D-8GBXL
MSI GTX 570
Intel 520 120GB SSD OS
Hitachi Deskstar 7K3000 2TB
Corsair AX750W
Pioneer DVR-212D
Silverstone FT02B-W
BenQ XL2410T
Windows 7 Ultimate 64 bit
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
LOL, it is probably me. I asked someone and it was suggested to use red slots, so that is all I tried. On the R4E you have to use red slots when only running 4 dimms or it wont boot.
Also do you use the Extreme OC Profile? On the R4E it is only used for cold.
MWave had the M4E open box for 179.00 so I grabbed it. Doesnt seem to clock as well as my giga z68 or p67 boards. Im all but done with this platform and hate to pay retail for a new board, so Ill have to make this work, or go back to the ud5.
After a couple months on the R4E, its hard to go back to using anything else. It is by far the most stable rig Ive had.
Last edited by OC Nub; 02-28-2012 at 07:33 PM.
anyone know what post code 58 is? Installed 2700k on M4e and hangs at 58 code. Chip work fine on other boards.
ok guys having a real tricky problem here . switched cpu from a 2600k to a 2700k and now i cant boot both memory anymore , just memory in slot 4 red if i use any other slot im getting a error 2e with diffrent sets of ram and and all if any solutions please let me know what you think , getting frustrated
Being Tweaked
ASUS Maximus V Forumla Bios 1408
Intel Ivy Bridge 3770k UNLIDDED
4.8 ghz EK Supreme HF Block 1.38v
Dominator Platinum 2666MHz 11-13-13-35
EVGA Titan eK bLOCK
Corsiar AX850W
Samsung 840 Pro 256GB C:/ OS
Samsung 840 Pro 512GB D:/ Game:
Western Digital Black WD4001FAEX 4TB 7200 RPM 64MB E:/ Data
Western Digital Black WD4001FAEX 4TB 7200 RPM 64MB F:/ Data
X-Fi Titanium Fatal1ty
Windows 7 PRO 64bit SP1
Bookmarks