Page 2 of 2 FirstFirst 12
Results 26 to 42 of 42

Thread: 2600k + SS

  1. #26
    Xtreme Addict
    Join Date
    Apr 2005
    Location
    Calgary, AB
    Posts
    2,252
    Cooler is a rotary single stage, a big sucker (nearly 80 pounds), built for holding -30+ @ 300w. When benching PI temps never really went above -45C, generally around -47 or so on a 32m. I dont bench CPU intensive benches at 1.61v, too risky to degrade this nice CPU.

    Benching SS over water has 2 advantages
    1) Temps are kept in check so I dont get instability from hi temps. I could move from 5.6 on 32m to 5.65.
    2) I dont know if this is even true or possible but I like to use SS over water because I think a cold overvolted chip will last longer than a very hot overvolted chip.





    I should also add that I had no issues with running the chip under cold. I just start in BIOS for a few mins while cooler drops to -50.
    Last edited by Eldonko; 01-27-2011 at 08:04 AM.
    MB Reviewer for HWC
    Team OCX Bench Team

  2. #27
    Champion
    Join Date
    Nov 2004
    Location
    Hungary
    Posts
    1,193
    Golden chip, take care! Nice results, congrats!
    "We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna

  3. #28
    Xtreme Addict
    Join Date
    Apr 2005
    Location
    Calgary, AB
    Posts
    2,252
    another double post ugh
    Last edited by Eldonko; 02-01-2011 at 12:39 PM.
    MB Reviewer for HWC
    Team OCX Bench Team

  4. #29
    Xtreme Addict
    Join Date
    Apr 2005
    Location
    Calgary, AB
    Posts
    2,252
    Small update. I managed to squeeze a few more Mhz out of this chip for 32m. Time still slow, need some memory, this is the best this bbse can do. Working on 3d now

    Last edited by Eldonko; 02-01-2011 at 09:20 AM.
    MB Reviewer for HWC
    Team OCX Bench Team

  5. #30
    Xtremely Bad Overclocker
    Join Date
    Jan 2005
    Location
    East Blue
    Posts
    3,663
    Quote Originally Posted by Eldonko View Post
    I had been using 54x all along since 55x did not work for me at all and was stock on bclk limit. With 56x I was able to push the previous limit of 5700 up to 5767. Spent some time on 57x and wasnt able to get into Windows, similar to 55x. I guess the sweet spot on this chip is 56x and for vcore 1.58v LL2 is optimal. Good chip, I hope to keep it alive for a while
    very interesting - I could run all multipliers as long as I was below 5590 MHZ. Seems chips are different there also.
    very nice work 5.7+ is quite a number on Sandy Sub 6 min 32m is piece of cake with this nice cpu Have fun tweaking
    | '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
    | '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
    | '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67

    | '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
    | '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
    | '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
    | '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled

    | '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW

    Quote Originally Posted by saaya
    sof pulled a fermi on all of us !!!

  6. #31
    I am Xtreme
    Join Date
    Aug 2008
    Posts
    5,584
    nicee

    what batch is it? fpo?

    good you're using subzero ....helps zero degradation


  7. #32
    Xtreme Member
    Join Date
    May 2009
    Location
    Krypton, Hawaii
    Posts
    363
    Nice work El Donko, keep tweaking and pushing bro

  8. #33
    Xtreme Addict
    Join Date
    May 2007
    Location
    Romania
    Posts
    1,246
    Guess you need to install that XP for S-pi

  9. #34
    Xtreme Member
    Join Date
    Jan 2003
    Location
    Norway
    Posts
    207
    I'v tested 3 L040B165, two of them are average, one is good. A friend has a L040B165 with max 45 mp, so thers really bad ones out there too.

  10. #35
    Xtreme Addict
    Join Date
    Apr 2005
    Location
    Calgary, AB
    Posts
    2,252
    CPU is here:



    I have 3 versions of XP installed actually and 32m is slower on all 3 for some reason. I really dont get why other than W7 is on a SSD and the XP partitions are not but really that is far fetched. 1m is super fast and 32m is slow in XP in OS that I have used for years in the past and have proven to be the best for 32m. For example the exact same run on my fastest XP install is 5-6 seconds slower. That is a 100% optimized OS, copy waza, CDT, hi priority, full reg tweaks, nothing else installed but video drivers, etc. I will figure it out though, I may have to move my steam folder from my other SSD partition and try an XP install there.

    Could also just be that W7 SP1 is fast for PI and my lack of hyper and 7-7-7 at hi mem speed is making all the difference.
    Last edited by Eldonko; 02-01-2011 at 01:18 PM.
    MB Reviewer for HWC
    Team OCX Bench Team

  11. #36
    Xtreme Addict
    Join Date
    Apr 2005
    Location
    Calgary, AB
    Posts
    2,252
    double post
    Last edited by Eldonko; 02-01-2011 at 12:38 PM.
    MB Reviewer for HWC
    Team OCX Bench Team

  12. #37
    You need LSC (Large System Cache) in XP, you'll be much closer to 'normal' once you get that engaged.

  13. #38
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    nice results man!
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  14. #39
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    191
    Eldonko.. Interesting serial number on your chip.. my golden was 0771... It died...

    I have another of the same batch that was 1077 that only does 54 multi..

    I just picked up another today thats around 1007.. does at least 56 multi...

  15. #40
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,468
    time to read up how to tune your OS mate

    LSC is definitely a good start heh
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  16. #41
    Xtreme Addict
    Join Date
    Apr 2005
    Location
    Calgary, AB
    Posts
    2,252
    Have OS tweaked now, been working on it today.

    After a lot of benching I finally get a sub 6m This same run with 7-7-7 would be sweet.



    Next step is to do some runs on server 03.
    Last edited by Eldonko; 02-02-2011 at 10:20 PM.
    MB Reviewer for HWC
    Team OCX Bench Team

  17. #42
    Xtreme Addict
    Join Date
    Apr 2005
    Location
    Calgary, AB
    Posts
    2,252
    Latest run

    Last edited by Eldonko; 02-12-2011 at 11:04 AM.
    MB Reviewer for HWC
    Team OCX Bench Team

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •