At 1866 mine run at 6-9-6-24 1.67V at 1866
1950 about 1.7v!
At 1866 mine run at 6-9-6-24 1.67V at 1866
1950 about 1.7v!
Mine bsod at 1866-8-8-8
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
It will do the stick dont like TRCD lower than 9 on these sticks!
Mine clock high so maybe its your bios or board? Im done benching them because im running 4 sticks now and my board wont post anything less that 8cl with all 4 sticks,Im waiting for asus to put out a new bios.
I'm thinking of getting either the 17000C7/17600CL7 or 17000CL8 kit for my P8P67 Pro.
All of them 'seem' to 'clock about the same.
Would you recommend any particular one of them and what can i expect in terms
of speed vs timings at around 1.6 - 1.65 VDDR ?
Last edited by bito; 02-15-2011 at 06:18 AM.
So far my setup seems nice and stable at 4.6Ghz 1.26v with ram at 1909-7-9-7 for 24/7 clocks but of course I would like to use these rams at their rated speeds as so far they offer no performance gain over my Kingstons at near half the price.
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
What program do you guys use to set ram timings on the fly?
Also, has anyone had problems with these on Asus motherboards? My first set of these had a faulty stick, now the new ones have arrived and they memtest fine but Im getting weird symptoms of instability even at 2133 and now down to 2100. Im about to try another set of rams but its looking pretty bad for these.
Last edited by aussie-revhead; 04-11-2011 at 01:35 AM.
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
Hey bro2000,can you set 6-9-6 at 2133 with 1.75V and boot?I have a strange issue with maximus,they will scale with 6-10-6 till 1.8V and reach high speeds,but with TRCD9 they wont post at 1.72+,just stuck at 2F memory code?
Get same results with 6-9-6 at 2133 now with new bios!
GSKILL RipJawsX F3-17600CL7D-4GBXHD Review
It's in Greek..but you can see the Charts/Results.
nope 8GB's do not work at rated speeds
I have two sets of these sticks that play nice with my ud5.
About 1.7v though the other settings I would need to quickly look up again as that system is off right now and I don't remember.
These look exactly the same as my kit, however mine are rated for 2133mhz CL7. I've pushed mine up to 2150 CL7 and no problem at 1.6v. I wonder if i should try 1.7v for CL6... Im scared. Goob job G.SKILL, these look like winners.
Last edited by TurboDiv; 07-08-2011 at 08:01 PM.
i9 9900K/1080 Ti
Nice!
I got mine to that + a little above and with a few 32m tests it looked like tightening my timings (at least the 3rd one and 4th one) didn't seem to impact my time at all, it actually was slower in a couple of the runs. I currently have them sitting at 7-10-9-27-1T @ 1.65v and it seems plenty happy, got them up to 2286 (1143 in CPU-Z [107x21.3 multi].
Boot-up at 5.38GHz, 1.7vdimm, ran spi32m at 6m11.125s
CPU-Z Validator 3.1
CPU: Intel Core i7-4770K 4.8GHz
MOBO: GIGABYTE GA-G1.Sniper M5 MATX 1150
MEMORY: G.SKILL Trident X 8GB 2400MHz 9-11-11-31 1T
GPU: 2 x eVGA GTX 780 SC
SOUND KRK Rokit 5 Limited Edition White Studio Monitors
SSD: 4 x Samsung 128GB Pro's Raid 0
PSU: SeaSonic Platinum 1000W
COOLING: 2 x Alphacool NexXxoS UT60 Full Copper 420mm 6 x Swiftech Helix 140mm Fans
CASE: Lian Li PC-C32B TECH STATION MOD build log coming soon
MONITOR: ASUS VG278HE Black 27" 149Hz
O.S: Windows 7 Pro x64
Bookmarks