What did you change to get the 8-8-8 stable, Lsdmeasap?
What did you change to get the 8-8-8 stable, Lsdmeasap?
I am not sure how stable that is, but for sure better than the previous attempts where I couldn't even reboot upon saving.
I switched slots, and updated to the BIOS that just came out (F7d). I don't think the BIOS had anything to do with it, more likely the slot move I'm thinking, but I could be wrong.
I'll test later tonight back in slots 1+3, and with the older BIOS back on 2+4 and see which move it was that made it bootable.
777-24 still a no go though no matter what, and since others can do it easy with similar memory I really think that whether these speeds are going to work for a user or not is going to depend on the CPU itself.
~ <Mushkin Enhanced Alpha Team ~
GIGABYTE Reviews - X58A-OC ~ P67A-UD7 ~ P67A-UD4 ~ 5870 SOC
<Mushkin Reviews - 998966 Radioactive ~ 998826 Ridgeback ~ 998679 Blackline
Crucial Reviews - C300 SSD ~ Blue Tacer DDR3
I just passed 32M at 5GHz DDR3-2133 8-8-8-24 88 1T
That is with the UD7 bios F7d, my DIMMS are in slots 2 & 4
2133 7-7-7 has never been good for me on my ES or this retail chip.....but 7-7-7 was fine at 1866 as you stated Ed
These DIMMs also run fine at 1866 6-6-6-18 60 1T on x58 with 1.7V....but they wouldn't even boot with my ES D1....still have not tried on my retail D2
[CENTER]The post counter is not an intelligence meter!Originally Posted by Massman
MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
Heat Team IRONMODS
i will try move from 1+3 slot to 2+4 slot
Intel Core i5 6600K + ASRock Z170 OC Formula + Galax HOF 4000 (8GBx2) + Antec 1200W OC Version
EK SupremeHF + BlackIce GTX360 + Swiftech 655 + XSPC ResTop
Macbook Pro 15" Late 2011 (i7 2760QM + HD 6770M)
Samsung Galaxy Note 10.1 (2014) , Huawei Nexus 6P
[history system]80286 80386 80486 Cyrix K5 Pentium133 Pentium II Duron1G Athlon1G E2180 E3300 E5300 E7200 E8200 E8400 E8500 E8600 Q9550 QX6800 X3-720BE i7-920 i3-530 i5-750 Semp140@x2 955BE X4-B55 Q6600 i5-2500K i7-2600K X4-B60 X6-1055T FX-8120 i7-4790K
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
[CENTER]The post counter is not an intelligence meter!Originally Posted by Massman
MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
Heat Team IRONMODS
Thanks a lot miahallen!
Woo,System Agent 1.1450V,will try your setting.
Super PI 1m passed,will try 32M.
Edit:
With this setting I have load Core1 50% and Core3 30% all the time ?!
Edit 1:
SetTurbo Boost to Disable and no load on cores.
Super PI 32m freeze on start.
Last edited by stasio; 01-19-2011 at 08:01 PM.
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
in my thread i was running
1067MHz 7-7-7-21-1T 32M easy
but i needed 1.24QPI/VTT and 1.78vdimm, that was the key for me, system agent didnt do anything
http://www.xtremesystems.org/forums/...d.php?t=265130
i recommend using slots 2 and 4, it seems to be a bit better
Last edited by dinos22; 01-19-2011 at 07:46 PM.
Dino,how far you can go with 1.66vdimm?
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
my hypers live a happy life between 1.7 and 1.8vdimm
So you use more system agent than what some have recommended as well eh? Clunk told me he noticed improvments at higher clocks with tight timings using 1.3-1.4 VCCSA, UD7 stops ate 1.305
So if this is a needed setting change for some clocks hopefully Gigabyte will increase the allowed amount on this.
It's too bad all CPU's wont take high QPI/Vtt, the one I have stops booting at 1.2, sometimes I can get 1.22 to post but not often.
I always use extreme on the performance enhance, do you think that holds me back? I know on X58 and P55 it was the most stable and provided the best bandwidth for sure!
Hey, would you mind passing this info along to the BIOS guys and see if they can address this in our BIOSes, or add the optional setting, I think it applies to us as well.
http://www.xtremesystems.org/forums/...d.php?t=265454
I'm about to try out SS on one of these setups, I know many say it doesn't clock well like that, but since release I have seen quite a few using phase with positive results.
Seen anyone on Dice or Ln2 with these yet?
Last edited by Lsdmeasap; 01-19-2011 at 08:26 PM.
~ <Mushkin Enhanced Alpha Team ~
GIGABYTE Reviews - X58A-OC ~ P67A-UD7 ~ P67A-UD4 ~ 5870 SOC
<Mushkin Reviews - 998966 Radioactive ~ 998826 Ridgeback ~ 998679 Blackline
Crucial Reviews - C300 SSD ~ Blue Tacer DDR3
[CENTER]The post counter is not an intelligence meter!Originally Posted by Massman
MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
Heat Team IRONMODS
just put it in UD7 also and it does 1067 with same settings easy
hey Ed yeah mate all IMCs will be a bit different i guess, i am just reporting on my experience. i just bought a retail CPU and have to go pick it up tomorrow so will see how that goes too
@Dinos22: have you tried the Hypers on slots 1 and 3? I've tried PSC chips on both 1/3 and 2/4 and have good results. Haven't tried the Hypers on 1/3 yet.
Does the cpu batch have anything to do with this?
i did in UD5 and 2 and 4 were better
just put it in UD7 and they didnt even boot from 1 and 3 eek
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
1+3 is what initially gave me issues too!
I'll be going back to verify though, but it does seem like 2+4 is better.
CPU pulling down now
~ <Mushkin Enhanced Alpha Team ~
GIGABYTE Reviews - X58A-OC ~ P67A-UD7 ~ P67A-UD4 ~ 5870 SOC
<Mushkin Reviews - 998966 Radioactive ~ 998826 Ridgeback ~ 998679 Blackline
Crucial Reviews - C300 SSD ~ Blue Tacer DDR3
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
107.8 first boot and first settings plugged in, I think 110+ is coming soon
What's the current record Bclk?
~ <Mushkin Enhanced Alpha Team ~
GIGABYTE Reviews - X58A-OC ~ P67A-UD7 ~ P67A-UD4 ~ 5870 SOC
<Mushkin Reviews - 998966 Radioactive ~ 998826 Ridgeback ~ 998679 Blackline
Crucial Reviews - C300 SSD ~ Blue Tacer DDR3
Thanks. I'll try this with the Hyper when I get back later today (UD7).i did in UD5 and 2 and 4 were better
just put it in UD7 and they didnt even boot from 1 and 3 eek
My Super Talent 2000 CL7 will will run 2133+ 8-8-8-20 T1 thru all benches except for spi32m.
OCM
Bookmarks