Msi p67a-gd65

[Splave]

If its always flashing it means secondary bios is corrupted, light should be off if all is okay, light solid on means primary bios is corrupted.
So something isnt right.

I was getting the bios freezing any time I tried to exit, there is no way to choose which you boot which kinda sucks

[Splave]

If its always flashing it means secondary bios is corrupted, light should be off if all is okay, light solid on means primary bios is corrupted.
So something isnt right.

I was getting the bios freezing any time I tried to exit, there is no way to choose which you boot which kinda sucks

[Hardass]

If its always flashing it means secondary bios is corrupted, light should be off if all is okay, light solid on means primary bios is corrupted.
So something isnt right.

I was getting the bios freezing any time I tried to exit, there is no way to choose which you boot which kinda sucks

Fixed Bro, all I had to do was Enable Multi BIOS Auto Update in bios.

[Splave]

Glad mate now all you need is that 580 to show up wtf!!@@#%R$# im pissed about it

[Hardass]

Glad mate now all you need is that 580 to show up wtf!!@@#%R$# im pissed about it

I just hope it is still sitting where you left it.

[mikecdm]

Figure out what you killed & let us know! What BIOS were you running?

That day I had just switched to the V1.8B10. I still haven't tried to figure it out.

Did u compare with the multimeter and cpu-z?

Ya, I listed the voltages in my post.

BIOS = 1.45v
CPUz = 1.48v
DMM = 1.58v

At higher bios settings descrepancy between bios and cpu-z is larger.

[Blackoberst]

New beta BIOS v1.8B11 for GD65.

http://forum-en.msi.com/index.php?to...55.0;topicseen

[vern]

New beta BIOS v1.8B11 for GD65.

http://forum-en.msi.com/index.php?to...55.0;topicseen

Nice thanks

[Sailindawg]

@Blackoberst

Any idea what this BIOS fixes?

The MSI site doesn't list a change log.

[klataa]

anyone tried?

[Blackoberst]

No idea, we just have to test it.

[kuziu]

is still a large vdroop, nothing has changed in this direction, improves support for energy conservation and is probably enough, the rest is the same as in the previous beta bios

[Sailindawg]

Read here.

Not so good. I may be sending this board back to Newegg until this all sorts out.

[Bullu$]

running v1.8b11
See some changes regard the bclck, it shows correct values ,10100,10200,10300 etc
U have high and low-Vdroop again, didn't test it yet how it fluctuates

[roadie]

Will flash to this methinks.

Having odd issue at the moment. 4.6Ghz stable with Prime95 and Linx, but bluescreens when playing a 720p rip through WMP. Think voltages need bumping a little.

[kuziu]

P67A-GD65 (1.9b1): http://91.121.148.119/downloads/BIOS/E7681IMS.191

[klataa]

P67A-GD65 (1.9b1): http://91.121.148.119/downloads/BIOS/E7681IMS.191

any change log?

[HelixPC]

Just installed 1.9B1 on a B3 board, i still cannot get vdroop to work correctly, i set 1.38 in the bios, i get 1.4 idle and 1.44 load, how can i fix this? Vdroop set to low vdroop.

[kuziu]

E7681IMS.180 ---> E7681IMS.191

- Fix G-skill F3-19200CL9D-4GBPIS unstable if XMP enabled.
- Fix show single channel message in post.
- Fixed that will hang D4 when connect blu-ray DVD.
- Fix memory(Corsair CMG6GX3M3A2000C7 4DIMM) XMP Enabled, the system hang 45.
- Fix memory(G.skill F3-16000CL6T-6GBPIS)set frequency:1866 timming:6-9-6-24 voltage:1.65, the system keep rebooting.
- Adjust cpu frequecy in cpuz group.
- add "Intel VT-D Tech" in OC\CPU Features page.
- support to gray the VT-d item of setup when the VT-d feature of the platform is disabled.
- Update Dual BIOS function.
- adjust USB3.0 performance.
- Reduce bios boot time.
- Fix APS Mode fail when use 2600K CPU.
- Update the Sandybridge show CPU and Dram Frequency Code.
- Fix mflash function fail.
- Adjust CPU voltage.
- Update FastBoot module to fix S4 issue.
- Fix G-Skill F3-17000CL9Q-16GBXLD boot fail when XMP enabled.

[Ampz]

This MB looks promising. I had a $3k rig sitting in eggs shopping cart for days waiting for a good b3 MB to not be sold out and this was the first one to do so. If I can get near the 5ghz range i'll be a happy camper

[HelixPC]

This MB looks promising. I had a $3k rig sitting in eggs shopping cart for days waiting for a good b3 MB to not be sold out and this was the first one to do so. If I can get near the 5ghz range i'll be a happy camper

im sitting at 4.8ghz happily , great board, miles better than the Gigabyte P67 boards.

[Charloz24]

Just started testing my new B3 motherboard and was wondering am I better with the latest beta bios or stick with the one it came with first? (V1.8 2011/2/14)

Also in the bios there is a memory testing utility (memory-z), is it any good or not?

[Skip_Skovhugger]

BIOS 1A1 is out, not really that big of a change log:

A7681IMS.191 ---> A7681IMS.1A1

- Update CSM Amilegacy16.bin file for fix System cannot enter Win7 32bit after installing Comback recover software(SATA3.0 PORT).
- Add USB3.0 support in legacy mode.
- Fix Multi BIOS watch dog fail in DXE issue.
- Fixed coding error.
- Fix usb mouse(steelseries 62001/Wintek.WM700)Movement Issue and usb mouse (ROCCAT.Kova) can not be detected well in UEFI bios

Available from here:
http://91.121.148.119/downloads/BIOS/E7681IMS.1A1

Remember to clear CMOS after flashing

[vengance_01]

So are people generally happy with this board. I have read lots of reviews and they seem to be pretty glowing. This board seems to have the best balance of features, O/Cing, and price. I might take a trip to micro center or frys(they should price match micro center) and grab this board along with a 2500K.

[sofarfrome]

I put mine together on a table last night just to load the OS and drivers. Make sure everything works. No OC yet. I will do that after i get the system up and running inside the case. I am using a crucial Satalll HD and can only say WOW, this system is blazing at stock compared to my 4.4GHz E8600 and DFI X38 setup. Can't wait to do some video encoding.