air 2600k (047a906) 56x is ok..57x??

[PcCI2iminal]

Hi guys i think i found a good batch
L047A906




sometimes the computer locks up and won't boot,but its not that hard to load the OS at 5600MHz and its stable for a few things



106MHz is OK


56x is OK



57x is OK?
time will tell......
LN2 tomorrow

MB - TP67XE - non UEFI bios
CPU - 2600k 047A906
RAM - G.SKILL Perfect Storm (1900MHz C6 at 1.85v)
Cooler - IFX14
Fan Cooler - San Ace 102CFM
SSD - Intel 80GB
PSU -Antec 1200w
Room temp - 18c

[Johnny87au]

awesome clocks there mate, Goodluck! 57x would the first i've seen..

[PatRaceTin]

Great for that board

Would you share voltage setting?

[Movieman]

All I want to say is this:
Can you drive over and show me what the hell I'm doing wrong?

[namegt]

Wow. Well done.

You and I the same batch
However, the x54 max my cpu

[Loser777]

2 cores 2 threads?

[Movieman]

Wow. Well done.

You and I the same batch
However, the x54 max my cpu

At 52 mine just looks at me, smiles and gives me the finger!

[fl0w3n]

Nice! How many chips from that batch do you have? Do they all perform the same?

Great results, SB performance on Air is still blowin me away... Just got my first time personal use of SB tonight on my buddies 2500k, 4.0 was as easy as a click of a button on the stock cooler, haha I love it.

What type of temps are you hitting with those voltages on that cooler?

[thebanik]

Wow, thats called luck??? or I just suck bad, 2 from the exact same batch here, First was able to do 53multi with 99.5bclk, second can only do 52multi with 100.2bclk. Highest bclk possible is 101.4. Would you mind sharing settings???

[fl0w3n]

Wow, thats called luck??? or I just suck bad, 2 from the exact same batch here, First was able to do 53multi with 99.5bclk, second can only do 52multi with 100.2bclk. Highest bclk possible is 101.4. Would you mind sharing settings???

Interesting

[Mad222]

Hey, same batch here
Got x55 MP-Wall no matter what I did
5.1g-5.2g Linx stable on air though
The only one 2600K I could rob from the local shop. There were only 10 pcs for the whole HK market

Oh boy...seems some serious binning is needed for Sandy

Good job, Bro!

[PcCI2iminal]

Thx guys

Great for that board

Would you share voltage setting?

multiplier and turbo at 56x
vcore at 1.58v - 1.65v
vdimm at 1.85v
PLL,VTT,NB all AUTO

All I want to say is this:
Can you drive over and show me what the hell I'm doing wrong?

hehehe
believe Dave,you are doing everything right ,your chip sux or need a better cooling
if you are a lucky guy you went to a shop and buy one like that and OC like what i did,
but if you are a unluck guy (like me) you will need to buy the damn lucky
and after weeks of searching i finally found one (or five ,i have five of them to test heheh)

and of course you need a good board ,TP67XE is one of the best P67 plataform

Wow. Well done.

You and I the same batch
However, the x54 max my cpu

its my second Bro,the first is OK for 53x and hit the wall at 54x,
,but when i was tweaking the second i found the same issue at 54x,but its work at 55x ,56x and maybe 57x,when i set 57x on setup the systems will start to load OS but it will freeze after some seconds
i will re-run the first chip to see if is possible to load at 55x and 56x

2 cores 2 threads?

yes,
4 cores plus HT is a waste of time for me now,because 5600MHz is stable only for pi and pifast and i will not push the voltages just to get into windows with all cores at these speed
tomorrow will be more exciting ,so stay tuned

Nice! How many chips from that batch do you have? Do they all perform the same?

Great results, SB performance on Air is still blowin me away... Just got my first time personal use of SB tonight on my buddies 2500k, 4.0 was as easy as a click of a button on the stock cooler, haha I love it.

What type of temps are you hitting with those voltages on that cooler?

5 of than
and i havent checked the temps but its not high temps for sure,im in a cold room (18c)

Wow, thats called luck??? or I just suck bad, 2 from the exact same batch here, First was able to do 53multi with 99.5bclk, second can only do 52multi with 100.2bclk. Highest bclk possible is 101.4. Would you mind sharing settings???

after tweaking about 30 pieces i got two chips good for 55x(one is dead) ,lots of 54x ,53x and 52x

[PcCI2iminal]

Hey, same batch here
Got x55 MP-Wall no matter what I did
5.1g-5.2g Linx stable on air though

Oh boy...seems some serious binning is needed for Sandy

Good job, Bro!

Hi Bro,
55x seems great ,how far can you push bclk??

The only one 2600K I could rob from the local shop. There were only 10 pcs for the whole HK market

ouch...
Intel need to put more SB on the streets....
much more......

[Viss]

Strong chip and board Junior, hope it wil scale a bit more with LN2

[C-N]

PcCI2iminal, Great chip & good luck for the x57

At 52 mine just looks at me, smiles and gives me the finger!

LOL, Sig worthy quote there mate.....

[trans am]

the way it scales with ln2 dont even bother. just get eat some junior mints or altoids or smoke a menthol cigarette and blow it on the CPU cooler and that should be enough. name gt and you are ripping that biostar board up... keep it up both of you!

[PcCI2iminal]

Strong chip and board Junior, hope it wil scale a bit more with LN2

Hi Bro
well i just want a few more MHz heheh

150MHz maybe,200MHz if is possible,am i asking too much??
hehehe

PcCI2iminal, Great chip & good luck for the x57



LOL, Sig worthy quote there mate.....

thanks M8

the way it scales with ln2 dont even bother. just get eat some junior mints or altoids or smoke a menthol cigarette and blow it on the CPU cooler and that should be enough. name gt and you are ripping that biostar board up... keep it up both of you!

3d01/3d03/3d05 is ok for 5500MHz
half of the tests of these benchs will abort at 5550MHz,i need more than heavy air heheh
I dont use water and its not cold enough for a chilled air,
well next stop will be LN2

fingers crossed

[_mat_]

A few mhz more with a little cold should be possible. My 2600k kept crashing with 5,5 in SuperPI on air (Noctua NH-D14) and could not boot to windows with multi 56x. At about 5 to 15 °C that was no problem at all. But chip gets unstable again at about 5,7 ghz. I can even boot the 57x multi ... sometimes into windows. But not 1m stable at any chance. 1,7 Volts do certainly not help.

Here is my best 1M run so far:



Batch: L036B125T
Wafer#: 0169

[nuno_p]

Nice cpu and nice OC.

Congrats.

[NBF]

Great to see that your hard work paid off!
I know what you have been through to bin all these cpus.

Top class benching!

[Neosabre]

Wow, you guys just won't be satisfied until one of these causes a mushroom-cloud over your continent.

[Postmodum]

Eheheh nice work Jr! ... But even your grandma could do it cof cof cof

Now, seriously, great batches and great mobo

[SteveRo]

Nice chip, nice work Mr. PcCI2iminal!

[Mad222]

About 107-8 with lower freq.
Intel needs to get us the LN2 ones

Hi Bro,
55x seems great ,how far can you push bclk??

ouch...
Intel need to put more SB on the streets....
much more......

[PatRaceTin]

i think each 2600K has each CPU Limit like 5.3 5.4 5.5 5.6 ?