Last edited by bmaverick; 05-13-2012 at 09:27 AM.
Support Your Local Sheriff - At high noon
My Heatware http://www.heatware.com/eval.php?id=63611
The pump Maverick, BMaverick ... has a massive hoard of a Laing DDC pump stash
So I fitted the White PCb to a Brown/Orange Impellor DDC pump
It worked right away, soldering was very simple.
But its loud, very loud with this BitsPower Minitank i have fitted.
I have a 50k and a 100k Pot on order and i will be fitting it.
The Pot should be connected to the VSP and Vref points on the PCB in the correct way, Once they are connected you need to cut the tiny trace that runs between these two pads on the PCB.
The Pot should then set the speed of the pump and reduce any noise -- Saying all that tho makes it sound like i have done it when infact i havent yet
My Rig:
I7 950@ 4ghz
6GB DDR3
GA-X58A-UD5
HD 6950 x2 Unlocked
Corsair TX950w PSU
TJ07 Modded
Cooling: 1xPA120.3, EK HF, EK HD6970 x2, DDC 18w
Yeah, I fixed three of these. When I severed the bridge, the pump stopped working. I still have two of them, but now I won't use them. They are just too loud!!
Fixed up my dead DDC1 with one of his Sanyo PCBs. Ran into a couple of hiccups along the way, the most important of which is that the wires weren't long enough for the new PCB on my pump. Its one of bmaverick's so YMMV on that. Didn't like how bright the LEDs were so I left em off. Still well worth the $10 to bring back a dead pump.
AMD Athlon II X3 435 @ 3.3Ghz | GA-MA785GM-US2H | OCZ 4x 2GB DDR2-800 | Corsair AX850 | EVGA GTX 460v2 1GB | Creative X-Fi Elite Pro | Windows 7 SP1 x64
Coolermaster ATCS840 | Swiftech MCR320 | Swiftech Apogee | Swiftech MCW60 | Laing DDC1 - Sanyo DIYINHK PCB
---
EOS-40D | EOS-300D | EF-S 10-22 | EF 28-135 IS | EF 100-400L IS | 580EX II
Yes, for only a few dollars, a little handwork along with a little time, getting a DDC 10W to a full 18W sure beats the cost of a new MCP35X any day. Besides, WC started out as a modder's hobby. Today, people want plug-n-play. Only the modder's can state, I built this myself.
Support Your Local Sheriff - At high noon
My Heatware http://www.heatware.com/eval.php?id=63611
The pump Maverick, BMaverick ... has a massive hoard of a Laing DDC pump stash
They don't sell the PCBs on eBay anymore unfortunately. But I was told that DIYINHK will have a website here sometime in the near future.
Hoping the website works for them.
Mine tends to be so-so since I'm not a web page development person. I have plenty of MCP350 DDC-1T non-functional PCB types if anyone wants to try the mod. Just send me a PM back. The DIYINHK PCB Sanyo board works on these.
http://bmaverickddcpumps.wordpress.com
Last edited by bmaverick; 09-16-2012 at 08:00 PM.
Support Your Local Sheriff - At high noon
My Heatware http://www.heatware.com/eval.php?id=63611
The pump Maverick, BMaverick ... has a massive hoard of a Laing DDC pump stash
DIYINHK PCBs are awesome. I think I managed to get the last one with Toshiba chipset 1-2 months ago. I fixed my burned koolance pmp-400 (DDC 3.25) and now it is better than new.
Core i7 3930K|EK Supreme HF 2 x PA120.3 1x TFC Feser 240 DDC3.25 XSPC ResTop 3x SUNON Maglev 6xPanaflo FBA12G12H 2xSanAce 9G1212H1011 4xEK-FC R9-290X|RIVE|4XR9 290X|Corsair 4x2GB GTX2|Corsair AX1500i|WD1001FALS + SSDNOW V300|HP LP2475w|Luxeon 5.1WH|Logitech G500|Lian Li A70B
i need a valid link where i can buy the ddc repair kit?
There is no more on sale on ebay
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
I know that this thread hasn't had a post in almost a year, but since I was looking for these and found the active DIYINHK website, I figured that I would at least post here that these PCBs (the Sanyo 10W and the white 18W) appear to both be available.
http://www.diyinhk.com/shop/6-ddc-pump
In memory of Gracie, my sweet, sweet wife and mother of my children. Darling, we will miss you dearly. May you rest in peace (born to this world on March 30, 1976; went to her Heavenly Father on Good Friday, April 22, 2011).
http://animoto.com/play/E0wFhd6tN0nA...ent=challenger
Heat
Just a confirmation...received my order in today's mail.I figured that I would at least post here that these PCBs (the Sanyo 10W and the white 18W) appear to both be available.
In memory of Gracie, my sweet, sweet wife and mother of my children. Darling, we will miss you dearly. May you rest in peace (born to this world on March 30, 1976; went to her Heavenly Father on Good Friday, April 22, 2011).
http://animoto.com/play/E0wFhd6tN0nA...ent=challenger
Heat
Bookmarks