Realtek LAN blows. What was I thinking ?!?!?!?!
Intel LAN card ordered. Grumble grumble.
Realtek LAN blows. What was I thinking ?!?!?!?!
Intel LAN card ordered. Grumble grumble.
I7-3930K @ 4.8Ghz (1.35) / R4E / 16GB Samsung LV @ 2133 (1.38V) / Crucial M4 128GB / Caviar Black 1TB / HD6850 / Corsair AX850 / MCP355->RX360->SR1-360->XSPC Raystorm->EK-R4E-LE / DD Double-Wide Horizontal
Thanks, wow, very nice temps. I'll give it another shot. Probably pit error. ;-)
I7-3930K @ 4.8Ghz (1.35) / R4E / 16GB Samsung LV @ 2133 (1.38V) / Crucial M4 128GB / Caviar Black 1TB / HD6850 / Corsair AX850 / MCP355->RX360->SR1-360->XSPC Raystorm->EK-R4E-LE / DD Double-Wide Horizontal
I7-3930K @ 4.8Ghz (1.35) / R4E / 16GB Samsung LV @ 2133 (1.38V) / Crucial M4 128GB / Caviar Black 1TB / HD6850 / Corsair AX850 / MCP355->RX360->SR1-360->XSPC Raystorm->EK-R4E-LE / DD Double-Wide Horizontal
Same thing here except with UD5 and the new F6b bios. Only option i changed was from ide to raid. You at least got further than I did. Mine hung solid at the gigabyte screen where you would hit del to enter bios. Something wrong with the sata controller in this bios. I coluldnt even get back into my OS because I am on raid. I hit the clear bios button and couple times then it finally brought up the bios recovery and reverted me back to F2 thank god.
Glad (well not glad, but) to hear I wasn't the only one. :-)
I had to let it boot into windows in IDE mode and then flash back to F6x.
Not an option for folks using boot raid.
Woohoo, microcenter has the TP67XE in stock. I might be doing a return exchange today. :-)
I7-3930K @ 4.8Ghz (1.35) / R4E / 16GB Samsung LV @ 2133 (1.38V) / Crucial M4 128GB / Caviar Black 1TB / HD6850 / Corsair AX850 / MCP355->RX360->SR1-360->XSPC Raystorm->EK-R4E-LE / DD Double-Wide Horizontal
7d, anylink ?
here :
http://www.gigabyte.com/products/pro...?pid=3648#bios
only f7b
Last edited by Gaul; 01-14-2011 at 02:33 PM.
P67 platform is still new, give it some time, im sure with more mature bios releases everything will be ironed out. Run everything at stock if you are having issues. IM at 4.7ghz now rock solid stable with 8gb of ddr3 1600 cas latency 8. You just need to get the right voltages, thats all. Raise the voltage of your cpu and run prime95 on small ffts
Last edited by GAR; 01-14-2011 at 04:42 PM.
Man, night and day. I'm lovin' this new MOBO. The BIOS is *nice*. My old UD4 had 8 phase power, this one has 10. AND it was $60 cheaper, gonna take the woman to dinner and a movie with a smile on my face.
And not a single double-triple-quadruple-clearCMOS-reset yet. ;-)
Or a friggin BIOS update that doesn't support AHCI... OMFG.
I7-3930K @ 4.8Ghz (1.35) / R4E / 16GB Samsung LV @ 2133 (1.38V) / Crucial M4 128GB / Caviar Black 1TB / HD6850 / Corsair AX850 / MCP355->RX360->SR1-360->XSPC Raystorm->EK-R4E-LE / DD Double-Wide Horizontal
Anyone with this board and EK supreme hf? Got supreme hf full nickel, which is pretty big and those caps are really near cpu socket.
Some comments would be nice
Asus P8Z68-V Pro gen3 / 2600k / 2x4gb G.skill RipjawsX / Asus GTX 670 dc2 top / Seasonic X-750 / Samsung 830 256gb / Asus Xonar DG / Define R3
Someone at HWLuxx asked the same question (having a HK 3.0) and he posted a pic of the board with block installed. (click the link in his post)
http://www.hardwareluxx.de/community...60-post38.html
As you can see, it touches the caps.
I don't know if there might be a risk to a shortcut or so.
I'm asking the same question because I ordered the UD4 too, and also have the HK 3.0.
Here's a post from the same guy. He said he turned his block 90° and it seems to be better (don't know if I read it correctly though).
http://www.hardwareluxx.de/community...8-post115.html
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
Ive also found F2 to be the most stable and requires the least amount of voltage for a decent OC. I can successfully OC to 4.6 @ 1.3v....For every day use I have it down to 4.3 @ 1.2v. When I use F6 or F7B - this OC fails miserably
Im going to stick with F2 for now as I like 4.3 @ 1.2v...Idle temps are between 26c-30c..Load is @ 50c...
My MAIN issue with this board is the USB3.0. Any time I connect a 1TB+ drive it detects it, then drops it, detects and it drops it...While doing this, it sees a drive but suggests I need to format it....Very annoying.
For it to remain connected, I have to first connect it to USB 2.0 and then back over to USB 3.0..
Anyone else have this issue? I too am seriously considering returning this and getting the P8P67 Pro...
Those links are kaputt!! I cant read them brother
But I did read somewhere else that they were able to use the HK3.0. You can bend the caps over a tad bit if you need to. I did with my hydroflow. Just need that little extra kittyhair for clearance. Dont be skerd brother, I know those big furry hands get in the way.
Alright. I found this http://www.xtremesystems.org/forums/...d.php?t=264923
Watercool HK 3 (W x H) is 59mm x 59mm
Supreme HF base (W x H) is 55mm x55mm and top 57mm x 57mm - If EK datasheet is reliable
I guess im safe? At that thread pics block seems still pretty close to caps. But does it matter is the space 1mm or 10mm?
Asus P8Z68-V Pro gen3 / 2600k / 2x4gb G.skill RipjawsX / Asus GTX 670 dc2 top / Seasonic X-750 / Samsung 830 256gb / Asus Xonar DG / Define R3
I7-3930K @ 4.8Ghz (1.35) / R4E / 16GB Samsung LV @ 2133 (1.38V) / Crucial M4 128GB / Caviar Black 1TB / HD6850 / Corsair AX850 / MCP355->RX360->SR1-360->XSPC Raystorm->EK-R4E-LE / DD Double-Wide Horizontal
Anyone else running into a problem where the board reverts to default clocks after waking from S3 sleep? I've tried both F7b and F6, and it does the same thing in both. I am using the CPU Ratio Multiplier to set the overclock, with all the turbo settings left at Auto. I tried setting the turbo multipliers to 45 manually (my current overclock) but then it wouldn't wake from sleep at all, just enter an endless reboot cycle.
Tried F3 and F6x but both also lose the overclock. Managed to get the multiplier settings working on F6x (so it doesn't reboot endlessly) but still no post-sleep overclocking.
Any ideas?
Last edited by Forceman; 01-15-2011 at 07:41 PM.
Asus P8P67 Pro BIOS 1253
i7-2600k @ 4.5 @ 1.3V
Thermalright Venomous-X w/GT @ 1450
8 GB (2 x 4) G.Skill Ripjaws DDR3-1600 9-9-9-24
Gigabyte GTX 480
Corsair 750HX
I have this with UD7 turbo mp 45. Have to restart to get my turbo back.
My best results in low voltages are with hte f6x from hwbot or f7b. But I didn't oced with F2 though my board came with it. I'll give it a try.
F7d works for some configs very good, even with ahci. They could even lower the voltages by 0.02V (Source: HWLuxx Germany).
For me, I've still troubles with ahci while booting.
ive got this board, and when im testing for stability with linx and the cpus running at full speed 100% load on all cores with the voltage set at 1.33 in bios, the voltage drops to 1.28 then 1.24?
Any ideas, thought it should stay around 1.32 1.33?
Gigabyte GA-P67A-UD4-B3 - F7a Bios
Intel CPU Core i5 2500K Sandy Bridge @ 4.6Ghz
Gigabyte GeForce GTX 460 OC 1024MB **SLI**
16 GB (4X4)Corsair DDR3 Vengeance Arctic White,1600mhz,CAS 9-9-9-24, 1.35V
Asus Xonar DG - Thermalright Silver Arrow
Creative Fatal1ty HS-800 Gaming Headset
LiteOn 20X SATA DVD±RW/RAM
Dell 24 INCH U2410 IPS Panel
Crucial RealSSD M4 128GB 500MB/S
1 x Samsung F3 1TB -- 2 x Samsung F4 2TB
Fractal Design R3 - Corsair 850W Modular PSU
Windows 7 64 Bit
Gigabyte GA-P67A-UD4-B3 - F7a Bios
Intel CPU Core i5 2500K Sandy Bridge @ 4.6Ghz
Gigabyte GeForce GTX 460 OC 1024MB **SLI**
16 GB (4X4)Corsair DDR3 Vengeance Arctic White,1600mhz,CAS 9-9-9-24, 1.35V
Asus Xonar DG - Thermalright Silver Arrow
Creative Fatal1ty HS-800 Gaming Headset
LiteOn 20X SATA DVD±RW/RAM
Dell 24 INCH U2410 IPS Panel
Crucial RealSSD M4 128GB 500MB/S
1 x Samsung F3 1TB -- 2 x Samsung F4 2TB
Fractal Design R3 - Corsair 850W Modular PSU
Windows 7 64 Bit
Bookmarks