MMM
    X

    Subscribe to New Ads!

    Receive weekly ads in your inbox!



Page 45 of 90 FirstFirst ... 354243444546474855 ... LastLast
Results 1,101 to 1,125 of 2227

Thread: i5-2500K/2600K batch number and o/c results

  1. #1101
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,580
    Quote Originally Posted by TheWolf View Post
    What's your best BCLK with the 2500K \ 2600K that will boot to OS & post?
    I can boot up high >105 BCLK (with UD7) sometimes after restarted from oc bench, but most of the time it will reset back to 34X and C1 @ boot up.

    Imo, its not worth the headache of corrupted bios or os, just use easy tune 6...same result anyway
    Last edited by Dumo; 03-19-2011 at 08:15 AM.

  2. #1102
    Registered User
    Join Date
    Apr 2007
    Location
    Pascagoula, Ms
    Posts
    68
    Quote Originally Posted by Dumo View Post
    I can boot up high >105 BCLK (with UD7) sometimes after restarted from oc bench, but most of the time it will reset back to 34X and C1 @ boot up.

    Imo, its not worth the headache of corrupted bios or os, just use easy tune 6...same result anyway
    The point was/is where it can boot from set in bios. I'm sure if I wanted to use ASRock eXtreme Tuner from within the OS it might do even more, but that wasn't the question.

  3. #1103
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    my new #L050A853 vid 1,2450

    boots x49 no internal PLL and prime stable on that





    x50 prime stable



    x52+







    cheers to all
    Sergio
    Last edited by andressergio; 03-23-2011 at 03:00 PM.

  4. #1104
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,580
    Quote Originally Posted by TheWolf View Post
    The point was/is where it can boot from set in bios. I'm sure if I wanted to use ASRock eXtreme Tuner from within the OS it might do even more, but that wasn't the question.
    Yep, 105.00 maxed from bios with UD7 C1 reboots...sometimes 2X or more...

    Bios clock 53X105 BCLK enabled
    PLL Enabled, other settings disabled
    Ram performance Extreme, 7-10-7-25, CL1, I/O lat.1, all subs auto
    LLC Level 2, Vcore 1.575V, Dram 1.72V
    Use Easy Tune 6 in Windows




    But, BCLK 100.00 bios guaranteed boot up to windows



    Last edited by Dumo; 03-19-2011 at 10:52 PM.

  5. #1105
    Xtreme Addict
    Join Date
    Sep 2004
    Location
    West Covina. CA
    Posts
    1,301
    Has anyone proven or disproven, that the best way to get to 5 ghz is to get a low vid (default 34x100 like 1.21-1.23 VID) CPU? And/or, that a low vid high temp CPU possibly responds better to voltage than a low temp CPU? (thus making it a screamer on water?). And all high VID chips (1.25+ VID @ stock speeds) should be avoided?

  6. #1106
    Banned
    Join Date
    Sep 2010
    Location
    Demotte,IN
    Posts
    373
    #L040B671
    5389.2Mhz
    X54 (1.56v)

  7. #1107
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    Quote Originally Posted by Dumo View Post
    Yep, 105.00 maxed from bios with UD7 C1 reboots...sometimes 2X or more...

    Bios clock 53X105 BCLK enabled
    PLL Enabled, other settings disabled
    Ram performance Extreme, 7-10-7-25, CL1, I/O lat.1, all subs auto
    LLC Level 2, Vcore 1.575V, Dram 1.72V
    Use Easy Tune 6 in Windows




    But, BCLK 100.00 bios guaranteed boot up to windows



    very nice dumo LLC2 ~ 1,6

  8. #1108
    Xtreme Member
    Join Date
    Jun 2003
    Posts
    258
    some preliminary results from my newly built rig, havent tried higher till now, but saw a tangible effect of reducing PLL in cpu stability. (CPU PLL in this ss 1.709 in bios -from 1.832 default), with default pll had bsods in this vcore.
    Last edited by papatsonis; 03-23-2011 at 11:18 AM.

  9. #1109
    Xtreme Member
    Join Date
    Jan 2004
    Location
    Ogden, Utah
    Posts
    165
    Anyone know if Newegg is shipping the "C" batches yet of either the 2600k or 2500k?
    If not which batches are comming from the egg at this point?

    thanks in advance

  10. #1110
    Xtreme Addict
    Join Date
    Sep 2004
    Location
    West Covina. CA
    Posts
    1,301
    Why do you want a "C" batch? They're not really any better.
    What you want is a "3" series costa rica cpu
    Haven't seen many results so far, but mine was doing 5 ghz at 1.404v load.

  11. #1111
    Xtreme Enthusiast
    Join Date
    Dec 2008
    Location
    MALAYSIA
    Posts
    828
    Quote Originally Posted by Falkentyne View Post
    Why do you want a "C" batch? They're not really any better.
    What you want is a "3" series costa rica cpu
    Haven't seen many results so far, but mine was doing 5 ghz at 1.404v load.
    Lucky u. But i dont think that all Costa Rica are good.
    Ive seen some of us tested CPU from 3 countries but still couldnt fine a good one. Again, it is pure luck.
    SUCCESSFUL TRADE LIST RM600k+

    ^^ Malaysia's Overclocking Enthusiast Community Website ^^
    Find us at Facebook HERE

    XS Successful Trades:
    G.Skill RipjawsZ 2400C9 4X4GB - sold to easegantini | G.Skill RipjawsX 2133C8 2X2GB - bought from Dumo | 2600K 57X - bought from newhit | 3770K 6750 - bought from Viss | 3770K 6750 - sold to Sniper | 3770K IMC 2800+ - bought from Dumo | G.Skill Pi 2200C7 - bought from websmile | 3770K IMC 2933+ - bought from Viss | DomGT 2kC7 3X2GB - sold to _AntLionBR_ | G.Skill Pi 2133C8 - bought from websmile | DomP 2800C11 - bought from Alex-Ro | Pi 2000C7 - bought from websmile | GTX4 + KVR 1333C9 - bought from TaPaKaH

  12. #1112
    Xtreme Addict
    Join Date
    Sep 2004
    Location
    West Covina. CA
    Posts
    1,301
    Kevin, I wish I could help, but I dont even know what to do
    Even if I bought the CPU for you and had you pay me later, you might wind up getting the malay one instead cuz newegg will NEVER let you choose the batch I buy from newegg cuz I get my things next day from UPS ground, since I only live about 20 miles from their warehouse....

    And didn't Tankguys turn sour and go under? I remember back during the core 2 days, tankguys was all the rage...

    And Mwave...I could catch a bus to Mwave (When I lived in Walnut, which is actually 1 city away from here, I could walk to Mwave in 10 minutes or bike there in 2 minutes), but I'm afraid of the dirty look they will give me if I say "i want to buy a costa rica i7-2600k. And me being black doesn't help one bit, if you're in an asian owned store...

  13. #1113
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,601
    really the only way to get a batch is to go to b&m store and pick through them yourself, or buy a known good clocker from online that has been tested. Sure you usually pay a bit more for a 5.5+ but usually the chances of finding one that good or better require quite a bit of binning.

  14. #1114
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,580
    @ Falkentyne...Its pure luck Fal, even peeps that have an access to bin 100s of 2600K will be lucky to find a single 57X chip.

    I try to avoid being near local Micro Center, because I can't resist to gamble and buy another 2600K.......Then look stupid watching it stuck at cursor at 56X

  15. #1115
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,601
    Quote Originally Posted by Dumo View Post
    @ Falkentyne...Its pure luck Fal, even peeps that have an access to bin 100s of 2600K will be lucky to find a single 57X chip.

    I try to avoid being near local Micro Center, because I can't resist to gamble and buy another 2600K.......Then look stupid watching it stuck at cursor at 56X
    man I know the feeling I haven't even sampled nearly as many as you and I realize how hard it is to even find one that does 56x I bet the odds of winning the lottery are better than the possibility of finding a chip that benches at >59x

  16. #1116
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,580
    Quote Originally Posted by l0ud_sil3nc3 View Post
    man I know the feeling I haven't even sampled nearly as many as you and I realize how hard it is to even find one that does 56x I bet the odds of winning the lottery are better than the possibility of finding a chip that benches at >59x
    Yep, Its like buying a book of $5 scratch ticket...From 250 tickets theres a lot of $1 and $2 winning, but rarely a Jackpot $25000 ticket

  17. #1117
    I am Xtreme
    Join Date
    Nov 2009
    Posts
    298
    12 hours Prime Blend Test



    5000mhz, 1.45v, HyperX Blu 8gb 1600mhz Cas 9, Air (Venomous X Black), Batch# L041B800

  18. #1118
    Xtreme Addict
    Join Date
    Sep 2004
    Location
    West Covina. CA
    Posts
    1,301
    I'm sorry, but those curves and that bun are more enticing than that screenshot.


  19. #1119
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Atlanta
    Posts
    473
    Quote Originally Posted by Dumo View Post
    @ Falkentyne...Its pure luck Fal, even peeps that have an access to bin 100s of 2600K will be lucky to find a single 57X chip.

    I try to avoid being near local Micro Center, because I can't resist to gamble and buy another 2600K.......Then look stupid watching it stuck at cursor at 56X

    +1 Dumo...

    My local MC is a ~10min drive and every time I sell off a regular/average 2600K... I always seem to keep thinking that maybe the next one will be the...
    Ryzen 9 on the test bench... Sometimes older generation/tech as well.

  20. #1120
    I am Xtreme
    Join Date
    Nov 2009
    Posts
    298
    what's the best batch for an i7 2600k? I kinda want to upgrade to an i7 lol

  21. #1121
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    Quote Originally Posted by PolRoger View Post
    +1 Dumo...

    My local MC is a ~10min drive and every time I sell off a regular/average 2600K... I always seem to keep thinking that maybe the next one will be the...
    i would do the same lucky me i live on South America with no micro center near

  22. #1122
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,601
    Quote Originally Posted by PolRoger View Post
    +1 Dumo...

    My local MC is a ~10min drive and every time I sell off a regular/average 2600K... I always seem to keep thinking that maybe the next one will be the...
    it is a problem no doubt, the closest one to me is about 3 hours away and I still run out there with a few friends when ever I sell a so so chip and grab as many as I can hoping for the one.

  23. #1123
    Xtreme Addict
    Join Date
    May 2005
    Location
    Sugar Land, TX
    Posts
    1,430
    Anyone have luck with offset mode? Even though I got the vcore where I wanted to it would occasionally lock up when changing speeds. I get insane idle wattage off of that. Even with a decent video card it clocked about 75W 4.2Ghz 1.25v on my killowatt. After testing with static vcore though its stable at this

    P8P67
    2600K @ 4.4Ghz 1.25v
    Hyper 212+
    maxes out at about 75C under prime
    L050A853

    This will idle at about 100W. Still pretty good It will go higher but then the temps get close to or over 80C.
    Last edited by ewitte; 03-25-2011 at 04:12 AM.

  24. #1124
    Xtreme Member
    Join Date
    Dec 2010
    Location
    Nor*cal
    Posts
    351
    yay, I now have an ASUS P8P67-M Pro with an i7 2600k and a Gigabyte P67 UD3 with an i5 2500k :p

  25. #1125
    Registered User
    Join Date
    Mar 2010
    Posts
    30
    Don't place all your chips on the C batch. I picked up my 4th i5 2500k on vacation near a Microcenter and grabbed the only C batch they had.

    Unfortunately it is just average at best. 12 hours Prime95 stable for 4.6ghz is 1.36v.
    i5 2500K, 40gb SSD/500gb HD, 650w Corsair TX, Asus P8P67 Pro, EVGA 460 gtx 1gb SC EE, 4gb ddr3 1600, Win 7 64bit

Page 45 of 90 FirstFirst ... 354243444546474855 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •