what would YOU push into it? G0 VID 1.325
past 350MHz bus it stops scaling well with vcore but i'm at 380 now (3.42)
temps are fine, what are common max voltages for Q6600's (I had the Q6600 one day before I blew a board mid-December, just got my UD3R today, so i don't have any experience with the chip (first board i clocked with was a 750i that wouldn't break 2.7GHz)) at 24/7 clocks
Last edited by skier; 01-06-2011 at 05:32 PM.
If I forget to say it, Thank You
As of 9-12-2013: Core i7 920 D0 / EVGA X58 SLI / Corsair Dominator 3x4G 2000MHz CL9 / GTX 460 1GB / HX750 / CoolerMaster Hyper N520 / Acer 23" 1080p TV
To Be DICE'd: GA-EP45-UD3R F12, 4GB OCZ Reaper HPC, Q8400/Q8300/E8400/E7500/E7400's/Pentium Ds/Celeron Ds/Pentium4s under a man-made CopperPot (w/ manuf. Copper NB pot)
I used to have one of those G0 @ 1.55V (MM'd) for a year or so, and it rarely idledSo no drama @ 1.55 given that the temps are ok... it's a 65nm chip after all
thanks, I'm Blend loading at ~60C with 1.45v at 3.33GHz without using my fan controller (so my CPU fans are running on the auto settings)
If I forget to say it, Thank You
As of 9-12-2013: Core i7 920 D0 / EVGA X58 SLI / Corsair Dominator 3x4G 2000MHz CL9 / GTX 460 1GB / HX750 / CoolerMaster Hyper N520 / Acer 23" 1080p TV
To Be DICE'd: GA-EP45-UD3R F12, 4GB OCZ Reaper HPC, Q8400/Q8300/E8400/E7500/E7400's/Pentium Ds/Celeron Ds/Pentium4s under a man-made CopperPot (w/ manuf. Copper NB pot)
Wow 1.45v with 3.33Ghz!! you should be able to lower that voltage a little BTW my G0 is also a 1.325 vid chip.
ASUS Rampage Formula X48 (Bios 1002 SoLoR MOD) | Intel Q6600 @ 3.6GHz (8x450) | 2x2GB GSKILL F2-9600CL5-2GBTD @ 1200Mhz XSPC Rasa + RX360 | Antec P182 | Xonar ST+H6 | XFX Black Edition 850W | BFG 280GTX OC 713/1458/2646 1.149V
im at 3.6@1.58 in bio... load is 1.51 IIRC... i think i did 3.2 on 1.28v or something....
SYSTEM
i5-3750K @ 4.6ghz - ASRock Z77 Extreme4 - 16GB Samsung DDR3 - Sapphire R7 370 Nitro 4GB
Water Cooling
EK Supremecy - DDC-3.2 w/XSPC Top -Swiftech MCR320-QP - EK Multioption 150
Originally Posted by RoadconeTuning
think im heading down just about the same path, set to 1.5125 for 3.465 GHz
just wish i knew more about all of those voltages
If I forget to say it, Thank You
As of 9-12-2013: Core i7 920 D0 / EVGA X58 SLI / Corsair Dominator 3x4G 2000MHz CL9 / GTX 460 1GB / HX750 / CoolerMaster Hyper N520 / Acer 23" 1080p TV
To Be DICE'd: GA-EP45-UD3R F12, 4GB OCZ Reaper HPC, Q8400/Q8300/E8400/E7500/E7400's/Pentium Ds/Celeron Ds/Pentium4s under a man-made CopperPot (w/ manuf. Copper NB pot)
Try 3.7-3.9ghz at the same volts, 3.4 to 3.6ghz is a bad spot on the nvidia chipset. My q6600 GO did 3.9ghz with 1.43v set in bios on a 680i board.
what about P45 :p
If I forget to say it, Thank You
As of 9-12-2013: Core i7 920 D0 / EVGA X58 SLI / Corsair Dominator 3x4G 2000MHz CL9 / GTX 460 1GB / HX750 / CoolerMaster Hyper N520 / Acer 23" 1080p TV
To Be DICE'd: GA-EP45-UD3R F12, 4GB OCZ Reaper HPC, Q8400/Q8300/E8400/E7500/E7400's/Pentium Ds/Celeron Ds/Pentium4s under a man-made CopperPot (w/ manuf. Copper NB pot)
P45 is fine at that FSB. I'd be more concerned for the board PWM longevity rather than the CPU's at those voltages, make sure the board is well cooled.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
well:
while the cpu is loading at 70C the PWM sinks aren't even warm to the touch
If I forget to say it, Thank You
As of 9-12-2013: Core i7 920 D0 / EVGA X58 SLI / Corsair Dominator 3x4G 2000MHz CL9 / GTX 460 1GB / HX750 / CoolerMaster Hyper N520 / Acer 23" 1080p TV
To Be DICE'd: GA-EP45-UD3R F12, 4GB OCZ Reaper HPC, Q8400/Q8300/E8400/E7500/E7400's/Pentium Ds/Celeron Ds/Pentium4s under a man-made CopperPot (w/ manuf. Copper NB pot)
nice....what fan is that?
MSI 790FX-GD70 / 965 BE C3 @ 3991 @ 1.392v / GSKILL PI @ 1637 6-8-6-20-28-1T / Cooler Master Hyper 212+ / Corsair HX850
Nice, looks like you have board cooling covered then
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
I am running my G0 @ 3850 at 1.45v on a EVGA 790i Ultra. Max temps are 66 degrees while gaming
The white fan is an NZXT case fan from a Hades, the intake is from....god knows what, and the exhaust is the exhaust case fan from my TT Armor A90
can't seem to get much more out of it stable, but there is certainly more
If I forget to say it, Thank You
As of 9-12-2013: Core i7 920 D0 / EVGA X58 SLI / Corsair Dominator 3x4G 2000MHz CL9 / GTX 460 1GB / HX750 / CoolerMaster Hyper N520 / Acer 23" 1080p TV
To Be DICE'd: GA-EP45-UD3R F12, 4GB OCZ Reaper HPC, Q8400/Q8300/E8400/E7500/E7400's/Pentium Ds/Celeron Ds/Pentium4s under a man-made CopperPot (w/ manuf. Copper NB pot)
VCore depend on each CPU.........................
Intel Core i5 6600K + ASRock Z170 OC Formula + Galax HOF 4000 (8GBx2) + Antec 1200W OC Version
EK SupremeHF + BlackIce GTX360 + Swiftech 655 + XSPC ResTop
Macbook Pro 15" Late 2011 (i7 2760QM + HD 6770M)
Samsung Galaxy Note 10.1 (2014) , Huawei Nexus 6P
[history system]80286 80386 80486 Cyrix K5 Pentium133 Pentium II Duron1G Athlon1G E2180 E3300 E5300 E7200 E8200 E8400 E8500 E8600 Q9550 QX6800 X3-720BE i7-920 i3-530 i5-750 Semp140@x2 955BE X4-B55 Q6600 i5-2500K i7-2600K X4-B60 X6-1055T FX-8120 i7-4790K
Mine ran better with nvidia also. 1.5Vcore@4G on i780 was best but never ran over 3.9G with x38,x48 or p45. It was at it best running 475x8 @3.8G and 1.4Vcore on x38 at 60C full load, was like that more than a year. Still using this chip in wifes comp at 400x9 @3.6G and stock? vcore? have not looked at it in a year. No problems 100% stable or she would be complaining.
Rampage III GeneI7 950@4.48G--1.485V
HR-02
it's strange that all of you are having much higher clocks on nvidia, but my 750i couldn't boot 2.7
imma try dropping down to 8x to see if I can get more since I know this board should carry me to 500FSB or better
edit: stressing 434x8 3.47G
Last edited by skier; 01-08-2011 at 09:13 AM.
If I forget to say it, Thank You
As of 9-12-2013: Core i7 920 D0 / EVGA X58 SLI / Corsair Dominator 3x4G 2000MHz CL9 / GTX 460 1GB / HX750 / CoolerMaster Hyper N520 / Acer 23" 1080p TV
To Be DICE'd: GA-EP45-UD3R F12, 4GB OCZ Reaper HPC, Q8400/Q8300/E8400/E7500/E7400's/Pentium Ds/Celeron Ds/Pentium4s under a man-made CopperPot (w/ manuf. Copper NB pot)
my 24/7 settings
Untitled.jpg
max fsb
max.jpg
an old wprime
wprime.JPG
the multi is 6x at idle and 8x at load(coretemp read wrong multi)
Capture.JPG
watercooled
Last edited by antonis; 01-08-2011 at 09:51 AM.
CPU:Q6600 @3600 Mhz (450x8) 1.4 V On Eleven block.
GPU:Gigabyte Gtx 460 1gb On Eleven block.
MOBO:Asus p5q deluxe 1.36 vnb.
RAM:4x1 Kingston HyperX 8500 @ 540 5-5-5-15 2.22v
SSD:Samsung 830 128gb
HDD:2xWd 1Tb
PSU:Silverstone Olympia 750 Watt.
CASE:CM Stacker 831 Blue.
Sound Card:Creative X Fi Champion.
Speakers:Logitech X-530.
Monitor:Samsung 245b.
![Send a message via MSN to [XC] Hicks121](images/misc/im_msn.gif)
put your ram @ 1:1 ratio & you will get more fsb for sure. You will also be able to reach higher daily oc.
well I got 451x8 stable
If I forget to say it, Thank You
As of 9-12-2013: Core i7 920 D0 / EVGA X58 SLI / Corsair Dominator 3x4G 2000MHz CL9 / GTX 460 1GB / HX750 / CoolerMaster Hyper N520 / Acer 23" 1080p TV
To Be DICE'd: GA-EP45-UD3R F12, 4GB OCZ Reaper HPC, Q8400/Q8300/E8400/E7500/E7400's/Pentium Ds/Celeron Ds/Pentium4s under a man-made CopperPot (w/ manuf. Copper NB pot)
( I think you are very easy on that cpu termination, bump it a bit, it may save you some vcore
i would have gave it more if i had any idea what it was for :p all i got was the board and a backplate no manual or anything( I think you are very easy on that cpu termination, bump it a bit, it may save you some vcore
and define bump
If I forget to say it, Thank You
As of 9-12-2013: Core i7 920 D0 / EVGA X58 SLI / Corsair Dominator 3x4G 2000MHz CL9 / GTX 460 1GB / HX750 / CoolerMaster Hyper N520 / Acer 23" 1080p TV
To Be DICE'd: GA-EP45-UD3R F12, 4GB OCZ Reaper HPC, Q8400/Q8300/E8400/E7500/E7400's/Pentium Ds/Celeron Ds/Pentium4s under a man-made CopperPot (w/ manuf. Copper NB pot)
Cpu term & cpu v is too high.
You can kick up the cpu term to 1.4 & drop your pll to 1.6 & v core to 1.45. Should be able to run the 9 multi like that. Drop your multi & see how much fsb she has in her. My ud3 does 550+. X3210, x3330, q9505, e8400
pll voltage is too high cpu will degrade
maximus IV extreme
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35
gigabut p35c-ds3r
gigabut x38-d6q
ballistix 85001240mhz@2.02v
what is the highest safe CPU term? I'm on 1.44 and it still gives me voltage-related blue screens
you're all sure the highest safe pll is 1.6? 1.5v is stock
edit: also what about MCH (NB)? how high can I go on that?
also I disabled LLC now, and am starting over from 300x9
Last edited by skier; 01-09-2011 at 09:10 AM.
If I forget to say it, Thank You
As of 9-12-2013: Core i7 920 D0 / EVGA X58 SLI / Corsair Dominator 3x4G 2000MHz CL9 / GTX 460 1GB / HX750 / CoolerMaster Hyper N520 / Acer 23" 1080p TV
To Be DICE'd: GA-EP45-UD3R F12, 4GB OCZ Reaper HPC, Q8400/Q8300/E8400/E7500/E7400's/Pentium Ds/Celeron Ds/Pentium4s under a man-made CopperPot (w/ manuf. Copper NB pot)
Posting Permissions
Reply With Quote
Bookmarks