I fancy having a play with some DICE, as I have no intention on benching with LN2 at all, As far as I can tell an aluminium pot will suffice, with a stainless steel mounting plate.
The pot measures 85x200mm.
Internal Diameter Steps
- 75x150mm
- 70x5mm
- 60x5mm
- 50x5mm
- 40x5mm
- 30x5mm
- 20x5mm
Just steps? That means a low surface area and little mass in the middle.
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94vOriginally Posted by Jowy Atreides
What would you suggest for the internals that would be easy enough to hand machine on a lathe?
From reading on various sites the Rev 1 Koolance Pot was fine for DICE benching and had a similar internal design.
the best pot for DI is mouse pot v2
you can find the design here: http://www.xtremesystems.org/forums/...d.php?t=263326 (just scroll down a bit.)
i7-980X @ 4GHz | GTX580 DirectCU II | X58A-OC | XMS3 1600MHz CL7 | HX1000W | Intel 510 120GB
looks great.
in another thougt, i think it is WAY to high, make it 100mm, i have a 100mm DI pot and it is just perfect!
i7-980X @ 4GHz | GTX580 DirectCU II | X58A-OC | XMS3 1600MHz CL7 | HX1000W | Intel 510 120GB
Posting Permissions
Reply With Quote
Bookmarks