Gigabyte GA-P67A-UD5 Discussion Thread

[DavidNJ]

Why are the voltages all reported as 1.1v?

[OC Maximus]

Wow, another super chip there C-N! lucky you

OCM

[OC Maximus]

2D Benches:











Still have a lot of work ahead of me in Super Pi and timings/subtimings.

OCM

[Hoss331]

Lets have a my Gflops are bigger than yours competition!

http://img.photobucket.com/albums/v4...ro/Holycow.jpg

Sure, ill contribute some to this.

[Johnny87au]

2600K L040B307 running Linx now at 5GHz 4/8 DDR 2133 1.33 bios 1.368 load ET6. She's making 69oC in a 20oC ambient on air! awesome.

Have to do some work now but will tweak it out @ 5GHz tonight & if 5GHz is all its got im still v happy.

Grats on a great chip mate! what you doing with the previous one?

[C-N]

Why are the voltages all reported as 1.1v?

Somehow CPU-Z reports qpi/vtt with the UD5, they have it working on the UD7 so not sure why we cant have it fixed!

Wow, another super chip there C-N! lucky you

Ye things are going good atm..... should buy a lottery ticket

What vcore you running your 2600 at & have you got internal pll enabled or disabled for your 5.2**GHz runs?

Originally Posted by ProStreetCamaro
Lets have a my Gflops are bigger than yours competition!

http://img.photobucket.com/albums/v4...ro/Holycow.jpg

Sure, ill contribute some to this.

Love the flops guys, I've started putting some results in the 3rd post in of this thread & when I get time I'll sure add a Gflops league table....

Grats on a great chip mate! what you doing with the previous one?

Thnaks mate, I havent thought about it but as you are asking I'll probably hold onto it for now just to make sure the 2600 breaks in ok then build a new work rig with it.

[stasio]

F6c is out.

[SteveRo]

Mr. Stasio, what is new in F6c?

Any clue?

[flesheatinvirus]

A new bios f6c, yummy. I will test it out tonight after work.

[stasio]

Mr. Stasio, what is new in F6c?

Any clue?

Fixed AHCI/RAID issue from previous beta F6b.
(for all P67 range beta BIOS dated 01/18/11)
Edit:
Also,I managed to flash BIOS with Q-Flash.

[OC Maximus]

What vcore you running your 2600 at & have you got internal pll enabled or disabled for your 5.2**GHz runs?

Was running 1.4v for most benches but bumped it up to 1.55v and keep it there so I don't have to constantly keep changing vcore since my temps are good.

I'm seeing max of 41c with 1.55v vcore @ full load.

OCM

[ProStreetCamaro]

Was running 1.3v for most benches but bumped it up to 1.55v and keep it there so I don't have to constantly keep changing vcore since my temps are good.

I'm seeing max of 41c with 1.55v vcore @ full load.

OCM

On water?

[OC Maximus]

On water?

Yes.



OCM

[flesheatinvirus]

I am liking that build, very clean there OC. I currently have two monster liquid systems and my Torture rack which is the shad. I am planning yet another and this time I will be using the new rev2 Moa3 from watercool in Germany. Very nice build quality and I could replace the rad in my truck with this, massive is the word.

[dinos22]

wow OCM that is one sweet setup there

[C-N]

2600K is rocking.... going to be fun benching this one

Cant (fails test 15) & probably wont bother trying again to get it to run 32M

[flesheatinvirus]

Nice! Looks like you found one. Careful now and lets see some numbers. Awesome job C-N.

[dinos22]

ads CN to my hate list

it's probably just heat mate, make the CPU colder and also try bumping vtt a bit and vmem
other thing you can do to reduce temps a bit maybe is run 2 cores only and no HT

[zalbard]

2600K is rocking.... going to be fun benching this one

Woah, rocking 57x multi... Badass!

[Sniper]

That is a seriously nice 2600K C-N

[OC Maximus]

I am liking that build, very clean there OC.

Thank you Note the splatter all over my screen. Acetone can be a real b

wow OCM that is one sweet setup there

Thanks Got it setup where I can just swap out GPUs thru QDC's or just run the CPU on water. BTW, A/C is sitting 2' away from the radiators blowing full blast. Fans on rads are blowing right on over the board. Everything stays nice and cool to say the least

@ C-N. Your x57 is making me sick to my stomach.

I need to get my hands on another chip ASAP.

OCM

[FlanK3r]

whau, this is nice! How about max stability (example with safe 1.4V, I dont believe datasheet and 1.52V is right for aircooled 24/7, Francois told nothing and Im waiting at answer )

[C-N]

Nice! Looks like you found one. Careful now and lets see some numbers. Awesome job C-N.

Just pot luck my friend, careful & me don’t play nice together

Numbers will come after I have to burnt the chip in & fully understand the voltage ranges it likes. Going to explore 5GHz with 4/8 SP1 first as that’s where I'd like to run 24/7.

ads CN to my hate list

LOL

it's probably just heat mate, make the CPU colder and also try bumping vtt a bit and vmem

Could be related but they still looked good to me, I have a single stage somewhere that might see the light of day again if I get carried away.

Gave it up to 1.2vtt made no difference but didn’t try a tad more vdimm.... maybe it needs it at 5.7GHz but I know the ram is good at this speed & voltage up to 5.3GHz with my 2500K

other thing you can do to reduce temps a bit maybe is run 2 cores only and no HT

Saving that one, probably won’t drop cores but I really don’t need HT so will probably leave it off from now on.

Woah, rocking 57x multi... Badass!

That is a seriously nice 2600K C-N

Thanks, makes me wonder if x57 really is the limit the SB can run.

@ C-N. Your x57 is making me sick to my stomach.

I need to get my hands on another chip ASAP.

OCM

He he... good game aint it!!!!

whau, this is nice! How about max stability (example with safe 1.4V, I don’t believe datasheet and 1.52V is right for aircooled 24/7, Francois told nothing and Im waiting at answer )

Have only run LinX, 3D & Pi at 5GHz DDR2133 HT on with SP1 @ 1.39v in bios & it passed so looks good for my 24/7 setting.

I don’t mind what voltage it runs as long as the temps don’t run away. Its running about 75oC full load LinX on air in a 14~16 ambient which im happy with. 5.2GHz needs more voltage I think 1.45 & then she hits 80oC but I haven’t fully tested 5.2 just short 5/10 runs to get the voltages close.

[dinos22]

slap it on SS pronto mate

[Johnny87au]

Wow bro nice, you using 2x triples? Whats your ambients because at 1.55 your temps are unreal mate!