***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[Falkentyne]

its lookin that way
i couldnt even reload windows on sata3

i'm reloading windows on last sata2 ports

does your sb heatsink get hot?
mine @ 35c runnin stock reloading windows

i'll play for another hour n clean up the board
2 sata2 ports are gone

@ least i know cpu good for 53x

Why didn't you enable PLL Overvoltage?
If you can boot into x53 on one BIOS but x47 on another, that's probably the reason.

But B3 bios version F3h is probably the most stable one to use on the UD7. No boot loops when using PLL Overvoltage (required for multiplier >47). F3 final has some bugs.

[zsamz_]

Why didn't you enable PLL Overvoltage?
If you can boot into x53 on one BIOS but x47 on another, that's probably the reason.

But B3 bios version F3h is probably the most stable one to use on the UD7. No boot loops when using PLL Overvoltage (required for multiplier >47). F3 final has some bugs.

i ennabled it
thats how i got to 53x before the sata ports crapped out lol


now all sata ports gone

[Nostromo]

Today is the last day I have to decide through retailer if i want to RMA my B2 for a B3. I'm really confused! Help?

[stasio]

Today is the last day I have to decide through retailer if i want to RMA my B2 for a B3. I'm really confused! Help?

Go ahead.

[zsamz_]

Today is the last day I have to decide through retailer if i want to RMA my B2 for a B3. I'm really confused! Help?

i got a dead hd for my b2 troubles lol

gonna rma the board now and the wd black

[Eldonko]

Why would you not? Just do it

Today is the last day I have to decide through retailer if i want to RMA my B2 for a B3. I'm really confused! Help?

[Expat GriZ]

Today is the last day I have to decide through retailer if i want to RMA my B2 for a B3. I'm really confused! Help?

Yup, why the hesitation?? Do it now!!

[newhit]

Today is the last day I have to decide through retailer if i want to RMA my B2 for a B3. I'm really confused! Help?

I'm concerned that my B2 has taken out a HD like "szamz" board did. The SATA ports seem to be acting up as well.

I have just been given a date to swop my B2 and..........The B2 is packed (carefully) and ready to go!

[nijel]

Hmm, strange... My B2 killed HDD in 2 hours the very first day (1/9). First was getting slower and slower, then partitions disappeared, finally the disk disappeared from windows. All manufacturer tests failed. Spinrite failed. Had to RMA it.

[Dumo]

Just installed on win7 64, quick run

Vcore bios 1.54 and LLC 10



This chip walled @ 5.65G on MIVE. Lol

[Nostromo]

Ok, I started the RMA to exchange the B2 for a B3 they are shipping the B3 first, will have it monday!
Excited!

[zsamz_]

Ok, I started the RMA to exchange the B2 for a B3 they are shipping the B3 first, will have it monday!
Excited!

lucky you

i was told by gigabyte usa that canadians will have to wait untill they have more stock
wtf exchange only for american customers for now
and they can't even give me a freakin eta
so i gotta keep this POS board for a month or 2 untill i can get an rma

so i gotta buy another board to play
i'm 10000000% sure it wont be a gigabut

[sin0822]

Just installed on win7 64, quick run

Vcore bios 1.54 and LLC 10



This chip walled @ 5.65G on MIVE. Lol

You never cease to impress.

Ok, I started the RMA to exchange the B2 for a B3 they are shipping the B3 first, will have it monday!
Excited!

Excellent news man!

[skeyo]

lucky you

i was told by gigabyte usa that canadians will have to wait untill they have more stock
wtf exchange only for american customers for now
and they can't even give me a freakin eta
so i gotta keep this POS board for a month or 2 untill i can get an rma

so i gotta buy another board to play
i'm 10000000% sure it wont be a gigabut

I hope it's not like that I wanted to rma mine in couple of weeks.

[zsamz_]

I hope it's not like that I wanted to rma mine in couple of weeks.

if its too late with your retailer .....
gigabut dont care canadians must wait
they will just give you the runaround untill they get enough stock
customer service will tell you "well you should have sent it back , now stfu"

thats exactly what was said to me

i'll be waiting ti'll b4 version

[Falkentyne]

lucky you

i was told by gigabyte usa that canadians will have to wait untill they have more stock
wtf exchange only for american customers for now
and they can't even give me a freakin eta
so i gotta keep this POS board for a month or 2 untill i can get an rma

so i gotta buy another board to play
i'm 10000000% sure it wont be a gigabut

Contact the place where you bought the board. They'll do a better job of it.

[zsamz_]

Contact the place where you bought the board. They'll do a better job of it.

the place i bought it from can't help me lol

so i guess i gonna have to wait till gigabut decides they gonna do the same exchange for canadians as they are doing for the rest

i should just ship it to intel

[cole2109]

Hey guys

My UD7 B3 came with F1 bios...
Max multi was 52×. But when i update on latest beta bios max multi was 51×. I tried all beta and still 51× was max
Where can i get F1?

One more thing...

I can't install Easy tune6.
I get this error...

[maxxx]

Hey guys

My UD7 B3 came with F1 bios...
Max multi was 52×. But when i update on latest beta bios max multi was 51×. I tried all beta and still 51× was max
Where can i get F1?

One more thing...

I can't install Easy tune6.
I get this error...

Strange you get only up to 52x. Why not try bios F3 or F4a? Find them here.

[cole2109]

I tried F3, F3C, F3H, F4A... max 51×
F1 52× with no problem.

[stasio]

Hey guys

My UD7 B3 came with F1 bios...
Max multi was 52×. But when i update on latest beta bios max multi was 51×. I tried all beta and still 51× was max
Where can i get F1?

One more thing...

I can't install Easy tune6.
I get this error...

You need to kickup Backup BIOS (hope you didn't flash and is still F1).
Then use @BIOS and save to your HDD.
Use latest ET6,your is old.
All this you can found 2-3 pages back.

[C-N]

I can't install Easy tune6.
I get this error...

I had that once after trying to update ET then trying to remove/delete it. Somehow I solved it by installing everything from the GB driver CD. Sorry cant be more specific...

[cole2109]

ET6 is latest!

Edit:
I download latest version and tried gigabyte CD.

[stasio]

Uninstall previous and install EasyTune6 (Intel) B11.0323.1.

http://download.gigabyte.us/FileList..._et6_intel.exe

[cole2109]

I deleted everything from register and still can't install.

Edit:
Max. voltage on CPU for 24/7 on water?