***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[andressergio]

GA-Z68X-UD7-B3 - F8f
GA-P67A-UD7-B3 - F5e

For Z68X memory is fix.

thanks stasio, for P67A ? not fixed ?

[stasio]

thanks stasio, for P67A ? not fixed ?

I didn't check P67A,can you do?
Thanks.

[andressergio]

I didn't check P67A,can you do?
Thanks.

yeah but at nite its 9:38am here working now, maybe Dumo try it first
either way when i get home i try

cheers !
Sergio

btw. we won against Argetina
today with Peru for the finals

[stasio]

yeah but at nite its 9:38am here working now, maybe Dumo try it first
either way when i get home i try

cheers !
Sergio

btw. we won against Argetina
today with Peru for the finals

Nope mate.
Btw,
good luck.

[GLENBOY]

yep works ok on p67 i'm still using my b2 board flashed with the z68 bios and all working as it should

[andressergio]

yep works ok on p67 i'm still using my b2 board flashed with the z68 bios and all working as it should

nice glen why dont u flash it with the one for P67A ? F5e ?

[stasio]

yep works ok on p67 i'm still using my b2 board flashed with the z68 bios and all working as it should

Your CPU-Z show still P67A and Vcore is probably OK.
As me before,when I first time crossflashed to Z68.
2 weeks ago I flash back to P67,testing something and crossflashed again and suddenly CPU-Z show Z68X (Vcore wrong).

nice glen why dont u flash it with the one for P67A ? F5e ?

Somebody will try for sure,another 2-3 hours.

[Da_maniaC]

ur memtest is out of date... http://www.memtest.org/#change
4.20 adds support for SB.

Thanks for the info.

[andressergio]

stasio

MEM fixed on F5e here's proof



Next i will try Touch BIOS

Flashed as backup all runing ok for now


***edit TOUCH BIOS NOT working same as before soft reads all but wont let me enter to Volts settings crashes there here proof



Uploaded with ImageShack.us

cheers !
Sergio

[Da_maniaC]

What was wrong with the memory on other the BIOS version then?

Because i am noticing something strange with my memory latencies....
In my BIOS the Latencies are set to 7-8-7-24 and in CPU-Z, AIDA64 and Memtest86+ v4.20 it shows up as 8-8-7-24. :?

Right now i have F5 on my Z68X-UD7-B3 but F7 is the latest.
Should i flash to the latest version?

[andressergio]

What was wrong with the memory on other the BIOS version then?

Because i am noticing something strange with my memory latencies....
In my BIOS the Latencies are set to 7-8-7-24 and in CPU-Z, AIDA64 and Memtest86+ v4.20 it shows up as 8-8-7-24. :?

Right now i have F5 on my Z68X-UD7-B3 but F7 is the latest.
Should i flash to the latest version?

talking about P67A F5x bioses would post 1333 mem even if you put 2133 inside BIOS, now fixed with F5e but waiting them to fix Touch Bios

cheers !
Sergio

[jacek]

What about the vcore offset? Is it possible to use simultaneously the vcore offset with multi LLC?
It was possible with f3h but not with f4.

[andressergio]

What about the vcore offset? Is it possible to use simultaneously the vcore offset with multi LLC?
It was possible with f3h but not with f4.

sup jacek

the only time i used that feature i almost killed the chip lol i put a wrong number and went up like crazy so i never use it again
im waiting LLC7 to by stronger than on F4 testing it right now as even having same LOAD i need than on F3H i have BSOD on IDLE with new bios releases...lets see now

cheers
Sergio

[Devil_Dog]

GA-Z68X-UD7-B3 - F8f
GA-P67A-UD7-B3 - F5e

For Z68X memory is fix.

Have to give the F5e a whirl tonight.

Thanks again stasio

[andressergio]

well stasio

i really quit its really painfull, bsods on IDLE with this bios exact like F4...touch not working again no matter what...F3H still seems the best BIOS but i expected a bit more work from gigabyte since we dont only bench, those new bios are nice for bench but really painfull for 24/7 at least on my tests...

cheers
Sergio

[stasio]

well stasio

i really quit its really painfull, bsods on IDLE with this bios exact like F4...touch not working again no matter what...F3H still seems the best BIOS but i expected a bit more work from gigabyte since we dont only bench, those new bios are nice for bench but really painfull for 24/7 at least on my tests...

cheers
Sergio

OK,thanks....it's only internal test Beta BIOS.
For sure need different setting then F3h or F4.
At least GB Taiwan working on it every day.

[Fatbird]

What about the vcore offset? Is it possible to use simultaneously the vcore offset with multi LLC?
It was possible with f3h but not with f4.

Adjusting DVID & Multi-level loadline at the same time is not allowed.

[andressergio]

OK,thanks....it's only internal test Beta BIOS.
For sure need different setting then F3h or F4.
At least GB Taiwan working on it every day.

i dont doubt on that stasio hope they make a good one and better than F3H, just came home anxious at lunch to test it and failed failed failed such a painfull feeling

cheers and thanks for all
Sergio

[stasio]

Every JZ BIOS for me (on Z68x BIOS) set at 1.66V,in TouchBIOS show 1.68V.
ET6 is OK.
Btw,
anybody on latest ET6 B11.630.1,showing LLC levels only "Default".
Previous B11.512.1 is OK.





Note:
Please note that this beta BIOS is still under testing and not approved by GBT standard test procedure .

[stasio]

Touch BIOS Utility B11.0720.1

http://download.gigabyte.eu/FileList...touch-bios.exe

[jacek]

Adjusting DVID & Multi-level loadline at the same time is not allowed.

On other motherboards it is possible.
Currently I have ASROCK Z68 ext4 and has no problems with LLC and vCore offset.

[sin0822]

with the oringinal 3 levels of LLC, found in previous BIOSes such as F3H for the UD7-B3 it is possible, but when they added 10 levels for more control it sacrificed DVID offset at teh same time.

[Falkentyne]

well stasio

i really quit its really painfull, bsods on IDLE with this bios exact like F4...touch not working again no matter what...F3H still seems the best BIOS but i expected a bit more work from gigabyte since we dont only bench, those new bios are nice for bench but really painfull for 24/7 at least on my tests...

cheers
Sergio

Do you still BSOD on idle if you raise the CPU PLL voltage to 1.88v?

[Falkentyne]

What does "Improved LLC" mean? Does it mean that you no longer get massive undershoots or overshoots with LLC6 and LLC7 anymore or something? So cryptic....has anyone tested the voltage spikes? F3G/F3H had perfectly predictable and steady vcores.....(load about 0.012-0.016v higher than idle at LLC2 on UD5/UD7 B3's...)

[andressergio]

Do you still BSOD on idle if you raise the CPU PLL voltage to 1.88v?

my PLL is on 1,86 and i BSOD on IDLE yes...now i went to F3H again