*** NVIDIA GTX 570 Overclocking Thread ***

[newviper]

Think my card is on its way out
Stock speeds run in 3dmark11 gives black screen and fan spinnig full speed.
Restart PC then beeps of no card detected. I have to shut down and restart to get it running again.

Now that I think of it, it could only do 820 core on stock volts 1.025

[Bigchrome]

send those cards that arti at stock speeds back.
well we cant unlock anything but as you look around the net there sure is alot of 570's runing 1g+ with water/cold air and volts.

BTW in my first post is an unlocked to 1.21v evga standard 570 bios it may be what some of you guys need to help hit 950+.
remember you should set fan to max when adding volts.

After having another look it doesn't seem to artifact at stock. But it won't run heaven at 820 core without artifacting/crashing at default 1.012v, crap card indeed! With 1.1v I can make it through the first 06 test at 955 core, but that's about all

This card has been giving me strange performance issues since day one though, only gets 13k ppd in folding while everyone else I've seen gets 15k+, can't for the life of me figure out what could cause that!

[nikolas61]

3Dmark 2003

GTX 570@ 1042/1190

[nikolas61]

PhysX on

[yukss]

hello guys, i just got mine from EVGA

[nikolas61]

GTX 570@997/1208

voltage 1.1V

[Bigchrome]

That is one serious card nikolas!

If you can answer either of these I'd be much oblidged :

-If you've run vantage at anything around 830 core/stock mem, could you tell me what graphics score you got?

-How much difference does cpu speed make to the graphics tests in vanatge?

(yes, very new to it and just trying to figure out some things a little quicker)

[nikolas61]

-if you've run vantage at anything around 830 core/stock mem, could you tell me what graphics score you got?

graphics score........24300

[NewBreed]

nikolas61>What's the max stable oc for a daily use and what temps do you get?What cooling are you using on the board!10q

[Bigchrome]

graphics score........24300

Thank you, that helps quite a bit! I'm only pulling 22000. It could be tweaks that you have on of course? But I'm fairly sure my card is broken, it's just very hard to see in most benches. Hopefully when it's sent back for testing they use the right app

[nikolas61]

nikolas61>What's the max stable oc for a daily use and what temps do you get?What cooling are you using on the board!10q

max stable oc for a daily use 880/1100

everything is on the air

[luubaan]

my OC 868 jadro ddr5 4500 shadery 1736Mhz
EVGA SC GTX 570

[NewBreed]

nikolas61>can u please tell me what VID u set for 880/1100?just out of curiosity.thnx

[Kilmoor]

nikolas61, those are some impressive clocks you've reached- motherboard and GPU. All on air you say? Does your case double as a microwave oven?

[Yolanda]

I use my GTX 570 at 850/1700/4300, 1.05V. Using GPU-Z 0.5.1 I remove OCCT/Furmark protection, FPS in OCCT increases about 2 times in comparison with protection. But after a couple of minutes system shutdowns. I tested when at stock (732/1464/3800 0.975V), the same, it shutdowns after a minute. And then card become broken, it doesnt function even at stock frequirences, any 3D game stop responding after a couple of seconds. Very sad.

Maybe it's because card only have 6+6 pin power and/or two power channels are not used in comparison with GTX 580, which uses the same pcb.

[cowie]

belated kick ass and to you nikolas great clocks:

[NewBreed]

can someone help me edit my gtx 570 bios in order to get higher voltage?

[vern]

can someone help me edit my gtx 570 bios in order to get higher voltage?

Latest NiBiTor can do it

[NewBreed]

yes ...that i know but i am not sure with what program i can extract my full bios.(from what i've heard gpuz does not extract the full one but i don't know if the latest version fixes this issue)

[Yolanda]

can someone help me edit my gtx 570 bios in order to get higher voltage?

Install Nibitor 6.0, load bios file, when go to "Tools" -> "Fermi Voltage", then in "Setting 3" select voltage you need in both columns. In "Perfmode / Voltage" at "P15" select "Setting 3", then save. It's all

[Yolanda]

yes ...that i know but i am not sure with what program i can extract my full bios.(from what i've heard gpuz does not extract the full one but i don't know if the latest version fixes this issue)

I advice you to use latest Nvflash 5.95 of higher. It's available for Windows and DOS. Run it from command prompt with:

Nvflash --save c:\yourbios.rom

[DomagojX]

Is there any way to set fan speed at 100%?

[cowie]

^yes you can unlock this limit in bios then flash new image

i cant quite get 50k....yet
cold jersey air 1.21v

Sucky 03 atm will try harder

[Oztopher]

Wow, nice clocks there for air, regardless of ambient

Completely shows why GTX 570 > 6970 6970 really needs to be cheaper than 570...

[DeadmanX]

Im having a bit of an issue... Anyone playing Battlefield bad company 2 and get random sound loops freezing? Will basically freeze 1-2 hours in to the game and then i can alt+ctrl+delete to open task manager and see BFBC2 is not responding. (Black screen before?)


Realtek issue? I am just lost currently in what to try.

Asus P8P67 PRO - 1253 bios
i7 2600k 4.5Ghz @ 1.35v
8GB Gskill

ty Realtek onboard sound?! :P