The T.E.C. gallery

**KnightElite** · 02-13-2004, 12:28 AM

Originally posted by Jabo
Knight -> how big is your temp difference between 256 and 226? Have you tried it yet?

hktm1 ->DD seems to be the choice for TEC AMD assy, it's a pity they don't do one for AMDs at Swiftech.... Maybe there's a way of modding straight water AMD block to TEC block?

BTW... my system is an AMD system. If you can get a hold on an MCW462 then you can do TEC on AMD. That is what I have.

**kayl** · 02-13-2004, 06:31 AM

and for silent operation i keep the radiators out side, its a little cooler out side too

**enzoR** · 02-13-2004, 10:22 AM

nice garden

**Slickthellama** · 02-14-2004, 02:51 PM

wow, that is a phat setup, im jealous

**X-Ecutioner** · 02-15-2004, 08:44 AM

my 9500np ddmaze 4 gpu block 80w pelt
vgpu and vmem mod and a lil connector to measure vgpu and vmem

**kayl** · 02-15-2004, 09:39 PM

that is a cool cold plate you made there, its cools the gpu and the ram sinks as well

well done, how much of an increase does that give ya on gf3

does that condensations ( i should say ice) forming on the bottom cause any problems

**Lasac** · 02-16-2004, 01:09 PM

I've oced that baby from 175/400 to 286/596... power strip didn't let me chose any more clocks

No problems with ice, I insulated everything with a grease like 'dielectric grease' and transparent silicon

But the ice grew up on the top of the dielectric grease!

I also used too much transparent silicon on gf3 and she survived!

Unhappyly she died days later for an incautiousness with as3...

Â§hit happens...

**sandman** · 02-16-2004, 01:27 PM

Man, that could have broken some records with those clocks.

Nice Overclock you had on that.

**Lasac** · 02-16-2004, 01:41 PM

I was tried to be in 1Âº place of orb, but unhappyly she died and I couldn't make nothing...

The maximum in that time went in 13.5k marks, now I don't know...

**Unseen** · 02-19-2004, 02:45 PM

Ok here is my first attempt to tec cooling... I want some tips.

**kayl** · 02-20-2004, 06:41 AM

i can see a compressor and a peltier block their, are you chilling your h20 with the compressor and using the tec on the cpu
if so that would work mint

**skate2snow** · 02-20-2004, 02:58 PM

looks great

!

Why youre not running it 100% capacity?

**Epsilon** · 02-20-2004, 03:03 PM

because my PSU isn't finished (looking for a nice case and have to get a 2.5A Fuse

)

There are allso some peltier PSU pics in there (one dir above)

I have stuff for 2 PSU's :
24v 15A
20V 20A

**Unseen** · 03-02-2004, 02:42 AM

After some changes...

**Unseen** · 03-02-2004, 02:45 AM

.

**Unseen** · 03-02-2004, 02:46 AM

..

**skate2snow** · 03-02-2004, 02:14 PM

Is -13C full load:o, thats very great man

RBX?

**Unseen** · 03-03-2004, 01:53 AM

No -13 is at idle. At full load i have ~15-17C
P4 3.0@3,9@1,565Vcore

**Unseen** · 03-03-2004, 01:55 AM

And the block is crusander from eleven. A friend of mine is specialist and is building waterblocks for fun!! This is one of them.

**skate2snow** · 03-03-2004, 05:29 AM

ouff, is it me or the full load is a bit high?

**gkiing** · 03-03-2004, 06:57 AM

no, 20C is normal on a TEC, but maybe you should insulate it better, but remember that squashing the neoprene actually makes it worse.

**kommando** · 03-07-2004, 12:19 AM

Might have a test pelt setup on one of my folding boxes, a 173w pelt

**skate2snow** · 03-07-2004, 10:20 AM

is it me or its cold?

. Whats your temps(block, CPU)?

And is that ice dangerous?

**redphoenix** · 03-07-2004, 10:23 AM

Originally posted by skate2snow
is it me or its cold?. Whats your temps(block, CPU)?

And is that ice dangerous?

Both are -20 or so no load.

@ 2.6ghz
GPU
Idle 5c
Load 11c

CPU
6c
Load 17c

**Marci** · 03-12-2004, 07:19 AM

TEC Gallery... hmmm... been a while since pix of me TEC rig were dragged up...

Thread: The T.E.C. gallery

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions