For my personal comfort levels that's WAY too hot. If I ever get into GPU crunching I'll also be getting into water cooling.
[SIGPIC][/SIGPIC]
Hey Folks,
I just tried to set up MW@home on my Boinc profile...
I'm no expert yet, but I'm pretty sure I did everything right.
I set the perfs as noted (no CPU etc) but whenever I turn MW@H on it steals 3 cores from my CPU that should be used for WCG tasks
and my GPU temps don't increase...
I'm getting the feeling that MW@H doesn't recognize the 6870 series cards yet.
Can anyone confirm/deny this?
Or am I just doing something wrong...
AMD FX-8350 (1237 PGN) | Asus Crosshair V Formula (bios 1703) | G.Skill 2133 CL9 @ 2230 9-11-10 | Sapphire HD 6870 | Samsung 830 128Gb SSD / 2 WD 1Tb Black SATA3 storage | Corsair TX750 PSU
Watercooled ST 120.3 & TC 120.1 / MCP35X XSPC Top / Apogee HD Block | WIN7 64 Bit HP | Corsair 800D Obsidian Case
First Computer: Commodore Vic 20 (circa 1981).
Hey Dave havent heard anything about the 6series cards yet. If its eating up your WCG cut that sucker off.
M@H is just an added bonus to me personally.
Thanks Slave,
Yeah... I turned it off for now, but I'm a true geek, SETI and this project really interest me.
I'll try and figure it out on my own...
My VC has nice aftermarket cooling so I don't think temps would be a problem.
I'm bored anyway, I'll check for new driver patches etc.
AMD FX-8350 (1237 PGN) | Asus Crosshair V Formula (bios 1703) | G.Skill 2133 CL9 @ 2230 9-11-10 | Sapphire HD 6870 | Samsung 830 128Gb SSD / 2 WD 1Tb Black SATA3 storage | Corsair TX750 PSU
Watercooled ST 120.3 & TC 120.1 / MCP35X XSPC Top / Apogee HD Block | WIN7 64 Bit HP | Corsair 800D Obsidian Case
First Computer: Commodore Vic 20 (circa 1981).
MW@H needs a double precision card and the 6800's are only single precision. Collatz Conjecture may be the only 6800 friendly project?
WOW... Really?
That kind of shocks me, because thats the error message I keep getting from Boinc: "An ATI GPU supporting double precision math is required"
I found a new Hotfix for the 6870 drivers (E) and updated, but it still doesn't want to work....
Actually, I'm really happy with the 6870 for gaming/benching it's a great bang for the buck card!
I'd refuse to pull it from the main rig because of this...
Guess I'll have to put a crunching rig together using my old 4850.
Do you know if it supports double?
Thanks..... Dave
AMD FX-8350 (1237 PGN) | Asus Crosshair V Formula (bios 1703) | G.Skill 2133 CL9 @ 2230 9-11-10 | Sapphire HD 6870 | Samsung 830 128Gb SSD / 2 WD 1Tb Black SATA3 storage | Corsair TX750 PSU
Watercooled ST 120.3 & TC 120.1 / MCP35X XSPC Top / Apogee HD Block | WIN7 64 Bit HP | Corsair 800D Obsidian Case
First Computer: Commodore Vic 20 (circa 1981).
the 4850 sure does, im using one I added my 5870 for a bit tonight as well, about one WU every 1 min 10sec. the 4850 alone turned out like 60k in half a day. totally crazy.
oh and Movieman, I would be more then happy to post else were but I can't seem to find the MW@H subforum and considering the thread is here...
CPU: Intel Core i7 3930K @ 4.5GHz
Mobo: Asus Rampage IV Extreme
RAM: 32GB (8x4GB) Patriot Viper EX @ 1866mhz
GPU: EVGA GTX Titan (1087Boost/6700Mem)
Physx: Evga GTX 560 2GB
Sound: Creative XFI Titanium
Case: Modded 700D
PSU: Corsair 1200AX (Fully Sleeved)
Storage: 2x120GB OCZ Vertex 3's in RAID 0 + WD 600GB V-Raptor + Seagate 1TB
Cooling: XSPC Raystorm, 2x MCP 655's, FrozenQ Warp Drive, EX360+MCR240+EX120 Rad's
@ Red Maw
Make sure you have gpu on while in use in BOINC manager other wise it will only run when its been idle for X minutes as seen below it.
How can i control the GPU usage? i want milkway to use no more then 75% of my GPU, i set that in preferences but it doesnt take affect anywhere. i also said that i dont want Milkyway using my CPU yet its still using 25% of it
Intel C2Q Q9550 2.83ghz :: Intel DQ45CB :: 4 x 2gb OCZ DDR2 PC2-8500 Reaper HPC :: ASUS EAH5850 :: Thermaltake TR2 RX 750w :: Western Digital Caviar Black 4 x 750gb in RAID 10
Intel e3-1235 3.3ghz :: Intel s1200kp :: 4gb kingston hyperX 1600mhz :: WD 500gb Cavier Green
Intel i7-3770k 4.4ghz :: msi z77ma-g45 :: 8 gb patriot Signature 1600mhz :: 160gb WD Cavier :: 5830 + 5870 CF :: Antec Earthwatts 650w
"...all men die, and no brave man lets death frighten him from his desire..."
you cant set % for GPU.. it either uses it or it doesnt. If its a multicore GPU, you could make it only use 1 core perhaps..
As far as it using your cpu.. it does use like 5% of cpu no matter what.. if you made a change on the milkyway website ( and no tlocal ), make sure you force an update to pull the new config.
@ masterg
I looked back over my settings and Im afraid to say its all or nothing when it comes to gpu % usage.
As for your 25% cpu usage by M@H check the first page I posted the preferences you should use to minimize CPU usage for M@H
I suspect you may have changed your CPU usage to 75%, not GPU and have a setting for M@H somewhere that is allowing for it to use your CPU.
You should only get ~2%-5% max CPU usage from M@H when setup as Ive shown.
Is there a way to automatically control the GPU runnings then? cause i have a 4850x2 2GB. its a friggin beast MW@H will use both GPU cores on it, but it reach ~91C on each core doing so and this has caused BSODs in the past
Intel C2Q Q9550 2.83ghz :: Intel DQ45CB :: 4 x 2gb OCZ DDR2 PC2-8500 Reaper HPC :: ASUS EAH5850 :: Thermaltake TR2 RX 750w :: Western Digital Caviar Black 4 x 750gb in RAID 10
Intel e3-1235 3.3ghz :: Intel s1200kp :: 4gb kingston hyperX 1600mhz :: WD 500gb Cavier Green
Intel i7-3770k 4.4ghz :: msi z77ma-g45 :: 8 gb patriot Signature 1600mhz :: 160gb WD Cavier :: 5830 + 5870 CF :: Antec Earthwatts 650w
"...all men die, and no brave man lets death frighten him from his desire..."
Thanks, i just might try that
Intel C2Q Q9550 2.83ghz :: Intel DQ45CB :: 4 x 2gb OCZ DDR2 PC2-8500 Reaper HPC :: ASUS EAH5850 :: Thermaltake TR2 RX 750w :: Western Digital Caviar Black 4 x 750gb in RAID 10
Intel e3-1235 3.3ghz :: Intel s1200kp :: 4gb kingston hyperX 1600mhz :: WD 500gb Cavier Green
Intel i7-3770k 4.4ghz :: msi z77ma-g45 :: 8 gb patriot Signature 1600mhz :: 160gb WD Cavier :: 5830 + 5870 CF :: Antec Earthwatts 650w
"...all men die, and no brave man lets death frighten him from his desire..."
The GPU clock cant go any slower...
Intel C2Q Q9550 2.83ghz :: Intel DQ45CB :: 4 x 2gb OCZ DDR2 PC2-8500 Reaper HPC :: ASUS EAH5850 :: Thermaltake TR2 RX 750w :: Western Digital Caviar Black 4 x 750gb in RAID 10
Intel e3-1235 3.3ghz :: Intel s1200kp :: 4gb kingston hyperX 1600mhz :: WD 500gb Cavier Green
Intel i7-3770k 4.4ghz :: msi z77ma-g45 :: 8 gb patriot Signature 1600mhz :: 160gb WD Cavier :: 5830 + 5870 CF :: Antec Earthwatts 650w
"...all men die, and no brave man lets death frighten him from his desire..."
Intel C2Q Q9550 2.83ghz :: Intel DQ45CB :: 4 x 2gb OCZ DDR2 PC2-8500 Reaper HPC :: ASUS EAH5850 :: Thermaltake TR2 RX 750w :: Western Digital Caviar Black 4 x 750gb in RAID 10
Intel e3-1235 3.3ghz :: Intel s1200kp :: 4gb kingston hyperX 1600mhz :: WD 500gb Cavier Green
Intel i7-3770k 4.4ghz :: msi z77ma-g45 :: 8 gb patriot Signature 1600mhz :: 160gb WD Cavier :: 5830 + 5870 CF :: Antec Earthwatts 650w
"...all men die, and no brave man lets death frighten him from his desire..."
You have any voltage control What are you using to change clocks also?
Back to what you asked earlier too, I dont believe you can control how many gpu cores to use. Ive tried suspending just on of mine but t will just jump that task and start another.
EDIT I see pics now MSI AfterBurner it lets me go more than 100mhz under stock if I like.
I have Rivatuner and ATI Catalyst Control 10.10 both of them list my GPU as being at the lowest clock settings of 625MHZ and im not able to select lower and i dont like touching voltages
Intel C2Q Q9550 2.83ghz :: Intel DQ45CB :: 4 x 2gb OCZ DDR2 PC2-8500 Reaper HPC :: ASUS EAH5850 :: Thermaltake TR2 RX 750w :: Western Digital Caviar Black 4 x 750gb in RAID 10
Intel e3-1235 3.3ghz :: Intel s1200kp :: 4gb kingston hyperX 1600mhz :: WD 500gb Cavier Green
Intel i7-3770k 4.4ghz :: msi z77ma-g45 :: 8 gb patriot Signature 1600mhz :: 160gb WD Cavier :: 5830 + 5870 CF :: Antec Earthwatts 650w
"...all men die, and no brave man lets death frighten him from his desire..."
i got MSI Afterburner and when i try to set the Clocks to 550mhz, i click apply and they reset to 625. i dont think i can lower them
Intel C2Q Q9550 2.83ghz :: Intel DQ45CB :: 4 x 2gb OCZ DDR2 PC2-8500 Reaper HPC :: ASUS EAH5850 :: Thermaltake TR2 RX 750w :: Western Digital Caviar Black 4 x 750gb in RAID 10
Intel e3-1235 3.3ghz :: Intel s1200kp :: 4gb kingston hyperX 1600mhz :: WD 500gb Cavier Green
Intel i7-3770k 4.4ghz :: msi z77ma-g45 :: 8 gb patriot Signature 1600mhz :: 160gb WD Cavier :: 5830 + 5870 CF :: Antec Earthwatts 650w
"...all men die, and no brave man lets death frighten him from his desire..."
and i must say 165 credits in ~10minutes... @_@
Intel C2Q Q9550 2.83ghz :: Intel DQ45CB :: 4 x 2gb OCZ DDR2 PC2-8500 Reaper HPC :: ASUS EAH5850 :: Thermaltake TR2 RX 750w :: Western Digital Caviar Black 4 x 750gb in RAID 10
Intel e3-1235 3.3ghz :: Intel s1200kp :: 4gb kingston hyperX 1600mhz :: WD 500gb Cavier Green
Intel i7-3770k 4.4ghz :: msi z77ma-g45 :: 8 gb patriot Signature 1600mhz :: 160gb WD Cavier :: 5830 + 5870 CF :: Antec Earthwatts 650w
"...all men die, and no brave man lets death frighten him from his desire..."
You may need to change UnofficalOverClocking value 0 to 1 I believe in the .cfg file.
Also be sure to check sync similar cards in settings as seen in pic.
it wont let me change the .cfg file. it keeps saying "Access Denied" when i try to save the changes. i love the fact that these jobs only last 8 seconds on my beast
Intel C2Q Q9550 2.83ghz :: Intel DQ45CB :: 4 x 2gb OCZ DDR2 PC2-8500 Reaper HPC :: ASUS EAH5850 :: Thermaltake TR2 RX 750w :: Western Digital Caviar Black 4 x 750gb in RAID 10
Intel e3-1235 3.3ghz :: Intel s1200kp :: 4gb kingston hyperX 1600mhz :: WD 500gb Cavier Green
Intel i7-3770k 4.4ghz :: msi z77ma-g45 :: 8 gb patriot Signature 1600mhz :: 160gb WD Cavier :: 5830 + 5870 CF :: Antec Earthwatts 650w
"...all men die, and no brave man lets death frighten him from his desire..."
Be sure your closed out of AfterBurner completely and if it still deny's access run as admin.
Bookmarks