Hi all,
Just incase you have not check, bios version 1.7 is out
http://www.msi.com/index.php?func=do...1&prod_no=2025
It is almost 2 weeks old now, but the reason I am posting this is that I could not get my pc to load windows with anything over 300 to 305 HTT on the 1.6 bios.
Yesterday it loaded with no problems at 315MHz with the new bios.
Cheers
Great info, thanks for sharing
Unknown_Team / Owner-Founder and Overclocker.
Round up 4 Coolers-Thermalright-Thermaltake FRIO-Noctua
305MHz? What am I doing that I can run 320MHz stable??? Are you sure everything else is correct?
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94vOriginally Posted by Jowy Atreides
But not all MB are equal or have the same conditions to OC. Maybe the MB from our friend it's a little b*tch.
This week arrive my 890FX so i will do some test
Unknown_Team / Owner-Founder and Overclocker.
Round up 4 Coolers-Thermalright-Thermaltake FRIO-Noctua
Sorry, I'm blind. I have the 790FX-GD70.
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Well, I think it may be linked to my memory. The low HTT.
I have cheap 1.5V Samsung 1333MHz. I also read somewhere on the forums here that running the memory at higher voltage should help with reaching higher HTT.
Anyway when I tried it, it didn't seem to make a difference.
When I changed to this bios, I changed nothing except my multipliers down and was able to hit higher HTT.
I'm also a bit of a noob, so I am not sure which voltage help for HTT.
I haven't actually tried anything about 315MHz as I didn't have time, so there is a chance it can go higher.
Posting Permissions
Reply With Quote
Bookmarks