Ahhhh wait for my Gigabyte 6970 arrived
Ahhhh wait for my Gigabyte 6970 arrived
Intel Core i5 6600K + ASRock Z170 OC Formula + Galax HOF 4000 (8GBx2) + Antec 1200W OC Version
EK SupremeHF + BlackIce GTX360 + Swiftech 655 + XSPC ResTop
Macbook Pro 15" Late 2011 (i7 2760QM + HD 6770M)
Samsung Galaxy Note 10.1 (2014) , Huawei Nexus 6P
[history system]80286 80386 80486 Cyrix K5 Pentium133 Pentium II Duron1G Athlon1G E2180 E3300 E5300 E7200 E8200 E8400 E8500 E8600 Q9550 QX6800 X3-720BE i7-920 i3-530 i5-750 Semp140@x2 955BE X4-B55 Q6600 i5-2500K i7-2600K X4-B60 X6-1055T FX-8120 i7-4790K
After switching from a P5wdh to a P67 UD5 board, my videocard overclock went way up. (it previously wouldn't even do 945 mhz at 1.25v unless the fan was blasting, now its going 950 at 1.225 and 60%, since I was flashed there before the system upgrade). I'll revert to stock later to see just how far the OC increased (old stock max was 920), and then see about going past ccc limits. I also had GSOD at 1450 RAM on the old board. With this new board, no GSOD...
Last edited by PatRaceTin; 01-30-2011 at 05:54 PM.
Intel Core i5 6600K + ASRock Z170 OC Formula + Galax HOF 4000 (8GBx2) + Antec 1200W OC Version
EK SupremeHF + BlackIce GTX360 + Swiftech 655 + XSPC ResTop
Macbook Pro 15" Late 2011 (i7 2760QM + HD 6770M)
Samsung Galaxy Note 10.1 (2014) , Huawei Nexus 6P
[history system]80286 80386 80486 Cyrix K5 Pentium133 Pentium II Duron1G Athlon1G E2180 E3300 E5300 E7200 E8200 E8400 E8500 E8600 Q9550 QX6800 X3-720BE i7-920 i3-530 i5-750 Semp140@x2 955BE X4-B55 Q6600 i5-2500K i7-2600K X4-B60 X6-1055T FX-8120 i7-4790K
Hi,
Have I a poor sample here. I can just do 920@1450 with out crach in 3DMark11. Memory looks fine but the gpu???
All over 920 make a crash. It doesn´t matter if I change "power settings" to +20 in ccc either.
i7 2600k @ 4.5GHz, 1.29V
Asus Maximus IV Extreme-Z (bios 0706)
8GB Ceil Corsa 2133MHz cl9
Asus GTX580
2x OCZ ve3 120Gb Max Iops (Raid0)
1x WD Black 1Tb
Asus Xonar Essence STX
NEC 24WMGX3
Corsair AX1200W
Lian-Li P80 A.S
Maximum stable overclock, using 1.30v max in afterburner and 100% fan speed.
Tested using atitool. I found when there's no OC programs running in background it allows gpu usage to go up to 98-100%. It finds errors quite quickly, more than gputool i think.
ATITool running for 22 minutes
ATITool stopped
3DMark 11
Vantage
Crysis
Heaven
I let heaven loop before starting the benchmark, nice minimum FPS
1020MHz on the core artifacts pretty much straight away in ATITool, but it can run benchmarks.
-
Core i7 860 @ 3.80GHz, 1.28v | GA-P55A-UD4 | G.Skill Ripjaw 4GB DDR3 @ 1900MHz 7-9-8-24 1N, 1.57v | HIS HD 6950 2GB, 1536sp @ 900/1400, 1.10v | Samsung F3 500GB | Thermaltake 750W | Windows 7 64bit | Air
Crunching away...
Can any one explane for me how to unlock msi ab so I can oc further than 950MHz on gpu?
It is a noob qust. but wtf!!
I use version 2.1.0 beta 7. Do I have to uninstall ccc or what?
Update: I solved it!
Thx any way..
Last edited by Vega; 02-04-2011 at 01:47 PM.
i7 2600k @ 4.5GHz, 1.29V
Asus Maximus IV Extreme-Z (bios 0706)
8GB Ceil Corsa 2133MHz cl9
Asus GTX580
2x OCZ ve3 120Gb Max Iops (Raid0)
1x WD Black 1Tb
Asus Xonar Essence STX
NEC 24WMGX3
Corsair AX1200W
Lian-Li P80 A.S
This is my max OC so far.
2x Sapphire 6970 with Asus bios watercooled. Got lots of OC headroom on the CPU's but just testing OC on the 6970's.
So how do you do when you use msi ab? I can easily do 950@1450 with 1.2V but everything over 950 crash 3dmark11. Vcore does not matter. I have tryed up to 1.3V.
Do you disable ccc?.....if how?
Thanks in advance.
i7 2600k @ 4.5GHz, 1.29V
Asus Maximus IV Extreme-Z (bios 0706)
8GB Ceil Corsa 2133MHz cl9
Asus GTX580
2x OCZ ve3 120Gb Max Iops (Raid0)
1x WD Black 1Tb
Asus Xonar Essence STX
NEC 24WMGX3
Corsair AX1200W
Lian-Li P80 A.S
cant go over 950mhz in my XFX HD6970, what software are you guys using?
do i need to flash another bios?
I would Flash the cards with Asus bios and use Asus Smartdoctor to enable higher OC
Can the bios version effect the gpu limit?
i7 2600k @ 4.5GHz, 1.29V
Asus Maximus IV Extreme-Z (bios 0706)
8GB Ceil Corsa 2133MHz cl9
Asus GTX580
2x OCZ ve3 120Gb Max Iops (Raid0)
1x WD Black 1Tb
Asus Xonar Essence STX
NEC 24WMGX3
Corsair AX1200W
Lian-Li P80 A.S
Not sure I understan your question, if you mean the max OC limt fo your card I dont think so but if you mean OCing over 950/1450 then i Think the Asus bios combined with Asus SmartDoctor is the best combo at the moment.
Improved a little on my 3DMark11 and Hwbot Heaven DX11 scores
Last edited by Mydog; 02-07-2011 at 07:15 AM.
Very nice score! Impressive memory oc!!
i7 2600k @ 4.5GHz, 1.29V
Asus Maximus IV Extreme-Z (bios 0706)
8GB Ceil Corsa 2133MHz cl9
Asus GTX580
2x OCZ ve3 120Gb Max Iops (Raid0)
1x WD Black 1Tb
Asus Xonar Essence STX
NEC 24WMGX3
Corsair AX1200W
Lian-Li P80 A.S
dump the ASUS smartdoc and use MSI AB. smartdoc actually limits the OC potential, i've done the comparing to proove it. though my card is an HD5970, i still get higher clocks and better numbers with MSI AB.
cranked
980x - 4.710ghz | mem - 12gb 1884 CL9 | vga - HD5970 | mobo - ASUS R3E
[188x25 1.55625v, 2x uncore 3768, QPI 6782 1.375v]
http://www.xtremesystems.org/forums/...postcount=1813
24/7 settings
4.0ghz @ 1.34375v
4.138ghz @ 1.35625v
4.272ghz @ 1.38125v
4.4ghz @ 1.41825v
4.522ghz @ 1.4500v
BATCH - 3013A540 =
Asus M5G / i7 3770K / Corsair H100 / G.SKILL TridentX 2400MHz / HD7970 / SSD Intel Postville 2x80GB RAID0 / HDD 2x1TB Samsung HD103UJ / PSU TT 1200W / Dell 3xU2311 ef / TJ07
Sry guys for asking but i have problems with setting the clock on my XFX6970 running in CF over CCC frequencies (950/1450) in Afterburner beta7. I have flashed both cards to Asus bios and enabled unofficial overclocking mode in Msi Afterburner cfg file. What am i missing here? I have the cards watercooled and would like to push them a little further than 1050Mhz with Trixx on 1.175V (if i use AB for setting the voltage Pc freezes)
i7 980x @ 4500Mhz 1.45V
Rampage III Extreme
6GB A-Data 1866Mhz+
2x XFX 6970
Crucial SSD 128GB M225
X-Fi Titanium Fatal1ty
Corsair HX1000W
GSX-R 750 Rider
Have you done this:
To enable unofficial overclocking in this version it is necessary to:
Set UnofficialOverclockingEULA field to the following text: I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
Set UnofficialOverclockingMode to 1 to keep PowerPlay active (may not work on old ASICs), 2 to traditionally disable PowerPlay or to 0 to temporary disable unofficial overclocking path
Case: M.M Ascension C.S
MB: Asus RIVE
CPU: 3960 24/7: 4900 @1.43v
Ram: 16 gig Dominator Platinum 2133 series ,@2450hmz 10.11.11.28 1.5v
Drive: OCZ RevoDrive 3 X2 240GB
Cooling: 2 x 560 SR1 + 1 X 280 SR1 single loop
Aquaero 5 w/NB PK3 Fans @ 900rpm. Koolance 380i w/. MCP355 x 2 XSPC top
Video: Titan Hydro Copper x 3 SLI
PS: 2 x Corsair 1200w
Great thanks for info
i7 980x @ 4500Mhz 1.45V
Rampage III Extreme
6GB A-Data 1866Mhz+
2x XFX 6970
Crucial SSD 128GB M225
X-Fi Titanium Fatal1ty
Corsair HX1000W
GSX-R 750 Rider
When you have Asus bios use SmartDoctor to enable "Overclocking range enhancement"
Then close SmartDoctor and fire up AF or "AF voltage unlocker", that's what I've done.
SmartDoctor ver?
It has to be the correct one, I'll check mine when I Get home I' on iPhon now
Bookmarks