Normal liquid temps?

[Carlton]

Hello,

Hardware
CPU: E6600@4Ghz Vcore 1.520(load)
Thermal paste: Coollaboratory ultra

Liquid
XSPC RX360
EK-Supreme HF
MCP655
1/2" ID - 3/4" OD

Fans
3x83CFM on radiator
2x50CFM on motherboard


Temperatures
18.1*C Ambient

40*c Idle - RealTemp + TAT | 35C - CoreTemp

Load(Large FFTs)
TAT = 59
RealTemp = 68 (TjMax 90)
CoreTemp = 63 (TjMax 85)

First time using water wondering if these temps are OK, they seem high.

Thanks.

[Jokester_wild]

Although im not familiar with that radiator, Your load temps seem a bit on the high side. My rig in the sig below gets around 50c load.

[ericFX1984]

yeah something is not right... what fans do you have? 83cfm tells us nothing

I can tell you that I got better temps than that in a hotter room, with a smaller rad... so something it not right

[Carlton]

yeah something is not right... what fans do you have? 83cfm tells us nothing

I can tell you that I got better temps than that in a hotter room, with a smaller rad... so something it not right

These are the exact fans: http://www.scan.co.uk/products/120mm...m-34db-oem-fan

[ericFX1984]

These are the exact fans: http://www.scan.co.uk/products/120mm...m-34db-oem-fan

yeah those temps are way too high... maybe you have an air pocket in the rad?