CORSAIR CMT6GX3M3A2000C8 - 2000 8-9-8-24 1.5v

[cstkl1]

2000 7-9-7 with 1.56...

Can you please show a 32m spi run with same clocks but with 6-9-6?

this is a 6gb kit on R3E 2nd kit
1.6v set but dmm read is 1.618v
first/third kit can do this at 1.596v

and the airflow pro lol.. is awesome...

seriously underated kit ..

[geobot24]

Yeah you are right, but i wanted to see the gain between 2000mhz@7-9-7 and 2000mhz@6-9-6 even it is a 4gb kit...

[westsider]

2000 7-9-7 with 1.56...

Can you please show a 32m spi run with same clocks but with 6-9-6?

yes here
1.66V
and 2 sec difference for 6-9-6 against 7-9-7


they can do 7-9-7 with 1.5 too i have to test it

my results are without airflow!!!!
because of asus strange ddr3 slots


here 7-9-7 again

[geobot24]

Thanks for the info..

If you give high vram, for example 1.80+, is it possible to decrease trcd from 9 to 8?

[westsider]

nope
impossible
i went up to 1.85V but trcd9 is a must be there
and over 1.77-1.80 it doesnt scale


for example ,if i want to high clock these rams for just high clock validation i have to go trcd11 then 2.7-2.8 no problems at all with 860 if you do it like 9-11-11-31-2T-100trfc

[lutanica]

Testing this kit atm.will post some of the proofing of result
But up till now impressive. WIll try 12gb if my proc imc can take it

so far under WC

i7 920
EVGA CLassified E760
2kits of Corsair CMT6GX3M3A2000C8 REV 7.1 ( PSC)
Coolermaster Silent Pro Gold 1200watts
(Verified by DMM my set voltage in bios is almost same as DMM Load Read)

6gb
Normal Default Operating
bclk 200 multi 21 : 4200mhz
1600mhz 6-8-6-20 1.5v ( DMM 1.492)
2000mhz 8-9-8-24 1.5v ( DMM 1.492)

Currently at
2150 8-10-8-24 4.5ghz HT off Uncore 4.2ghz RTL 60,62,64 @ 1.62v set ( DMM 1.618v)



so lol this sticks are pretty good and not that pricey
this are way better than supertalent 2200mhz CL8's 4gb kits or 2000mhz CL8 hypers or 1866 CL7 hypers
heck they are the closest to 2k C7's Hypers except u have a higher tRCD

Does something by the name "overclocking illuminati elite" exist around here? A group who does magic and voila they get these Dominator GT 2000Mhz sticks running at 2000mhz with so low vQPI and vDIMM???! I mean there are many many people busting their ass to get these stable even at 1600mhz.

Guys, please help me (who is literally going insane) here. First I have 2000mhz CL7 then I thought something was wrong with them and I bought the newer 2000mhz CL8 (CMT6GX3M3A2000C8 ) but still not stable. I mean I have tried EVERYTHING ! Setting sub-timings manually accordingly to CPU-tweaker's SPD, loosening the timings. setting vQPI from 1.5 to 1.6, (by the way with bclk 200), changing CPU (920 and 930 with pretty good batch actually - low vcore), changing motherboard (P6T6 WS Revolution). I mean what in satan's name do you do guys to get it stable?? Or that's one of your illuminati rules - not revealing the spells ?!!

Is there anything special in the sub-timings that is the pain in the ass here or what?

Don't give me that "overclocking has no garantee bla bla" and as I can see, you guys haven't used any particular good cpus in your pictures here.

I use prime95 to test for the stability. In my OC, I set the CPU multiplier very low below stock. So, only OCing the RAM with BCLK. my unstability in prime95 has a weird pattern. I use FFTs from 768 - 4096. right? When the vQPI is around 1.5, all FFTs from 2048 - 4096 are stable but FFTs from 768 - 2048 is unstable and onle ONE thread stops (not more). As I up the vQPI a notch, the unstability goes one FFT-level up. Then keeps going till I hit vQPI 1.61 or something. (first time I thought that I got stable there) and then I ran the FFTs from 768 - 2048 and then BOOOM. The unstability had gone in circle and back to the begining.

Got the best cooling ever for the CPU as well. Low low temps..
So, what the hell is that? I have vIOH set to 1.24v and CPU PLL set to 1.8v. Please show me a way here or I'm gonna have to jump off a cliff...

[BeepBeep2]

Mine 2200 C8 does 1800mhz C6-7-6 on AMD 790fx old board, Am I missing something? I doubt this new corsair can go anywhere close to it.

I'm able to do 1840 6-6-6 with my 2000 C7's, I'm pretty content until DDR4 as well.

[OC Nub]

I have had my Dominator 2000c8's for a year now an they are still running strong. But figured it was time to try something new, and cheaper to have as a backup kit. These are the Mushkin Redline 1600's 6 8 6 24, so far they are running good at 2000mhz 7 9 7 24 on 1.66v, 169.00 for a 3x2gb kit.

[andressergio]

I have had my Dominator 2000c8's for a year now an they are still running strong. But figured it was time to try something new, and cheaper to have as a backup kit. These are the Mushkin Redline 1600's 6 8 6 24, so far they are running good at 2000mhz 7 9 7 24 on 1.66v, 169.00 for a 3x2gb kit.

great RAM my friend

[OC Nub]

Seems to be a good kit, especially for the price. Thanks.

Put my 920 in, and raised the uncore frequency, it still passed HyperPi with a couple bumps of QPI.

[CryptiK]

Very nice ram, but that uncore on water is nicer Good backup kit for sure.

[OC Nub]

Thanks CryptiK, have a second kit of mushkin ordered, the radioactive. Hope they do as well.

[dr_nemo]

Hello everybody.
I'm to have this memory 8-9-8-24-2T (rev. 7.1a) , but he not working on nominal, i set all manually in bios not working.
I set the qpi/DDR to 1.65, vcore to 1.31250, still not working on there 2000MHZ. Can somebody help me ? =(
My rig: Asus Rampage III Gene/ Core i7 950/ Zotac GTX 580/ Corsair AX850
All what i can take from this memory is 7-8-7-7-20-1T at 1600Mhz, qpi/drr = auto, vDDR = 1.64, i7 950 @ 4 GHZ = 1.3000v
Tell me please what this is may be ? Bad processor who not tak 4Ghz uncore ? or i do something wrong ?

[ViRuS2k]

mine are not to shabby either

BBSE 2000 OCZ Blades c9s

[cstkl1]

CPU : I7 2600k @ 105.5x46(bios),105.57x46(Real)
Ram : Corsair Dom GT 3x2gb Kit 2000 8-9-8-24 @ 2x2gb 2250 7-10-7-27 1N
1.66v Bios Set (DMM load Read 1.6506v )
M/B : Asus Maximus IV Extreme
BIOS : 1101
PSU : AX1200

[Yellowbeard]

Very cool update. What cooling are you using for the CPU?

[cstkl1]

WC bro.
HT On the temps would have been way lower but not as stressful as ht off on linx and they are the same vcore for i7 2600k

[cstkl1]

1st Round of Tweaking Reduced tRFC etc

[CryptiK]

Insane clocks, nice work and nice kit!

[cstkl1]

ty bro

cooling limit

[ToyTen]

hi here,



1.65vDIMM..

Uploaded with ImageShack.us

Got these results on my rig, after a comon working week.

I am learning at the moment so am i just bootleggin' sorry

I am not gonna comment as i must go on with testings.

Cheers

[tistou77]

Hello

In the title is shown "2000 8-9-8 1.5v", but the specifications indicate 1.65v (and also on the stick)

Why?

Thanks

[tistou77]

The CMT4GX3M2A2000C8 ver. 7.1 (8-9-8-24) are also good in OC that CMT6GX3M3A2000C8 ver. 7.1A (8-9-8-24)?

Thanks