Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
I have asked for 6-8-6 @1.68v...
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
cst...got the same corsair ram and 2x kits = 12GB as well. Can u recommend some RAM timings I could try for 1900mhz? Also I see u running the ram with 1.5v. Dimms are advertised to run at 1.65v - should I drop the vdimm?
Thank u very much in advance. Mobo is ramapage 3 extreme, if it helps.
Update. So managed to find the quite alot out about the RAM from the XMP profiles built in. The 1.5v vdimm is for lower speeds. Looking at cst's...maybe 1.65v might not be required as I am aiming for 1800-1900
Last edited by JenBell; 09-01-2010 at 03:49 PM.
they are very good
2000 6-9-6-22-1T-80 ist 24/7 possible with 1.65V
My DDR2 Results:
Cellshock GMH 8500 2GB-1508MHz 2.74v vldt
Cellshock GMH 8500 2GB-1398MHz 4-4-4-12 2.74v vldt
Cellshock GMH 8500 2GB-973MHz 3-2-2-1 2.74v vldt
Cellshock GMH 8500 2GB-1000MHz 3-4-3-5 3.25v SP1M
Mushkin XP 8500 GMH 2GB-1300MHz 2.45v vldt
OCZ Reaper 1200MHz PSC-1406MHz 2.28v vldt
Dominator 8500 GKX 2GB-840MHz 3-2-2-1 2.5v vldt
My DDR2 Results:
Cellshock GMH 8500 2GB-1508MHz 2.74v vldt
Cellshock GMH 8500 2GB-1398MHz 4-4-4-12 2.74v vldt
Cellshock GMH 8500 2GB-973MHz 3-2-2-1 2.74v vldt
Cellshock GMH 8500 2GB-1000MHz 3-4-3-5 3.25v SP1M
Mushkin XP 8500 GMH 2GB-1300MHz 2.45v vldt
OCZ Reaper 1200MHz PSC-1406MHz 2.28v vldt
Dominator 8500 GKX 2GB-840MHz 3-2-2-1 2.5v vldt
Sorry peeps
Will post requested except 1800 as i havent yet done 225x21 stable
Currently clocking r3e
Which is weird on rtls and doesnt like low voltage
2k c8 but does 2k c7 easy
West dude no it cant do 6-9-6-24 under 1.65
Btw ure clocking on tbe ram is auto. Its easy to do 2k on r3e
My bet is this sticks are about the same as 2400 cl9s
While the 2533cl9 is same as the 2k c6s
Clocking psc u get to reduce vdimm when u hit
A scaling block on tRAS. tRCD increase just maintains scaling. This where the big difference with hypers of 2k 7-7-7-20/21 that does 1.6v
Last edited by cstkl1; 09-15-2010 at 05:26 AM.
I just recieved this kit...
What is the best that these memories can do? They are only for benching...
2000, 2100, 2200+ with what timings?
24/7 Rig: AMD Athlon II 450 - MSI 760GM E51- 8GB 1600MHz Gskill RipjawsX- Nvidia GTX260 - OCZ Vertex2 60GB - Seagate 640GB - Antec Quattro 1200W - Samsung T220
Bench Rig: Intel Core i7 3770K - Asus Maximus IV Extreme - 4GB 2000MHz Corsair Dominator GT - 2x Nvidia GTX260 - Intel Postville 40GB - WD VelociRaptor 36GB - Antec Quattro 1200W
2070 6-9-6-24-1T 1.65V
2200 7-9-7-26-1T 1.65V
2400 8-9-8-27-1T 1.65V
with cas9 and trcd10 you can hit 2.6GHz easily if your IMC does it
My DDR2 Results:
Cellshock GMH 8500 2GB-1508MHz 2.74v vldt
Cellshock GMH 8500 2GB-1398MHz 4-4-4-12 2.74v vldt
Cellshock GMH 8500 2GB-973MHz 3-2-2-1 2.74v vldt
Cellshock GMH 8500 2GB-1000MHz 3-4-3-5 3.25v SP1M
Mushkin XP 8500 GMH 2GB-1300MHz 2.45v vldt
OCZ Reaper 1200MHz PSC-1406MHz 2.28v vldt
Dominator 8500 GKX 2GB-840MHz 3-2-2-1 2.5v vldt
My DDR2 Results:
Cellshock GMH 8500 2GB-1508MHz 2.74v vldt
Cellshock GMH 8500 2GB-1398MHz 4-4-4-12 2.74v vldt
Cellshock GMH 8500 2GB-973MHz 3-2-2-1 2.74v vldt
Cellshock GMH 8500 2GB-1000MHz 3-4-3-5 3.25v SP1M
Mushkin XP 8500 GMH 2GB-1300MHz 2.45v vldt
OCZ Reaper 1200MHz PSC-1406MHz 2.28v vldt
Dominator 8500 GKX 2GB-840MHz 3-2-2-1 2.5v vldt
Thanks for you response...
I know that powerchips dont like high voltage...What about this kit with over 1.65v and how much difficult decreasing trcd from 9 for better results?
24/7 Rig: AMD Athlon II 450 - MSI 760GM E51- 8GB 1600MHz Gskill RipjawsX- Nvidia GTX260 - OCZ Vertex2 60GB - Seagate 640GB - Antec Quattro 1200W - Samsung T220
Bench Rig: Intel Core i7 3770K - Asus Maximus IV Extreme - 4GB 2000MHz Corsair Dominator GT - 2x Nvidia GTX260 - Intel Postville 40GB - WD VelociRaptor 36GB - Antec Quattro 1200W
trcd9 is a must have above 1800MHz
it doesnt scale up higher with voltage
i wouldnt go over 1.75V
it wouldnt bring any result either
My DDR2 Results:
Cellshock GMH 8500 2GB-1508MHz 2.74v vldt
Cellshock GMH 8500 2GB-1398MHz 4-4-4-12 2.74v vldt
Cellshock GMH 8500 2GB-973MHz 3-2-2-1 2.74v vldt
Cellshock GMH 8500 2GB-1000MHz 3-4-3-5 3.25v SP1M
Mushkin XP 8500 GMH 2GB-1300MHz 2.45v vldt
OCZ Reaper 1200MHz PSC-1406MHz 2.28v vldt
Dominator 8500 GKX 2GB-840MHz 3-2-2-1 2.5v vldt
hmm westsider
think u better be specific that ure testing only at 2x2gb on a p55
eh x58 clocks compareable on same voltage is around 150-200mhz less.
This model can use 1600MHz 6-8-6-20 1.5v Stable same?
Here, it gives error in the second week in LinX with this configuration. Best result here was 1600MHz with 7-7-7-20 in the past 20 LinX - 24/7.
What would be the best result in a totally stable 1600MHz @ LinX? Thanks!
My rig: [i7-990X ES w/AC MX-4 @ 4.5GHz by Prolima Super Mega / Fox x58 BloodRage P11 / Sapphire CFX HD 7970 OC
A-Data v2.0 2200MHz C8 / A-Data v2.0 1866MHz C8 / Dom.GT 2000C7GTF / Kingston 2000MHz D3T1K3/6GX (All IC Hypers)
Plextor M5S 128Gb Raid0 / WD 4x VelociRaptor 300Gb (10K) WD3000HLFS / Asus Xonar Essence STX / Seasonic 860 Platinum
Cooler Master Cosmos II UT w/10x Noctua P12 fans + 2x P14 FLX + 2x Scythe GT P-15 (1850) / BenQ XL2420T 24" 120Hz
S&S 6g, 7H, Sensei Rubber, 9HD, QcK / Tt Meka G1 / Logitech G5 v2 / Razer Destructor / Puretrak Talent / Senn HD598]
*My English
it is rev 7.1A??
my first kit does 2k c8 at 1.5v
second kit does 2k c8 1.52
third kit does 2k c8 1.52
i know i kindda love this stick atm..
and first kit now is doing 2150 8-10-8-27 at 1.58v ( increasing from 24 to 27 i get reduce the vdimm from 1.62v to 1.58v.. )
all with airflow pro ( led stuff) and it doesnt causes any form of instability so far.
http://www.youtube.com/watch?v=59xEZzESoyY
hmm can admin of this site update the bb code
http://www.vbulletin.com/forum/showt...ouTube-BB-Code
My rig: [i7-990X ES w/AC MX-4 @ 4.5GHz by Prolima Super Mega / Fox x58 BloodRage P11 / Sapphire CFX HD 7970 OC
A-Data v2.0 2200MHz C8 / A-Data v2.0 1866MHz C8 / Dom.GT 2000C7GTF / Kingston 2000MHz D3T1K3/6GX (All IC Hypers)
Plextor M5S 128Gb Raid0 / WD 4x VelociRaptor 300Gb (10K) WD3000HLFS / Asus Xonar Essence STX / Seasonic 860 Platinum
Cooler Master Cosmos II UT w/10x Noctua P12 fans + 2x P14 FLX + 2x Scythe GT P-15 (1850) / BenQ XL2420T 24" 120Hz
S&S 6g, 7H, Sensei Rubber, 9HD, QcK / Tt Meka G1 / Logitech G5 v2 / Razer Destructor / Puretrak Talent / Senn HD598]
*My English
Well i knew a few ppl who couldnt get any good clocks on it also.
also u do know this is PSC chips right
relax the tRCD's
ure reducing latency .. increasing voltage.. without much increase in bandwidth..
see the glops on these...
i just increased the tRAS from 24 to 27 with around loss of bandwith only 100mb but reduced the vdimm from 1.62v to 1.58v set ( DMM read 1.519 peak that i saw during this run)
i7 920 1.375v.. alphacooled
MSI GTX480 eked
My rig: [i7-990X ES w/AC MX-4 @ 4.5GHz by Prolima Super Mega / Fox x58 BloodRage P11 / Sapphire CFX HD 7970 OC
A-Data v2.0 2200MHz C8 / A-Data v2.0 1866MHz C8 / Dom.GT 2000C7GTF / Kingston 2000MHz D3T1K3/6GX (All IC Hypers)
Plextor M5S 128Gb Raid0 / WD 4x VelociRaptor 300Gb (10K) WD3000HLFS / Asus Xonar Essence STX / Seasonic 860 Platinum
Cooler Master Cosmos II UT w/10x Noctua P12 fans + 2x P14 FLX + 2x Scythe GT P-15 (1850) / BenQ XL2420T 24" 120Hz
S&S 6g, 7H, Sensei Rubber, 9HD, QcK / Tt Meka G1 / Logitech G5 v2 / Razer Destructor / Puretrak Talent / Senn HD598]
*My English
have u tried 6-8-6-21
eh pll so high for cpu at low ram speed
ok been looking over at ure bios
can u change all the dref voltage to exactly 1/2 of ure vdimm.
ok for 2k 8-9-8-24 use that voltage for 6-8-6-24
make sure tRTP is at 6 ( reading in cpu tweaker... ) ( the reason i said reading cause like R3e set 8 in bios is 6 in cpu tweaker which is correct while evga set 6 get 6.. )
the psc sticks on this only functions at 1-6, 9+...7 and 8 is not possible with mine
vtt ... if u need 1.335v for 1600 uncore 3.2
ure vtt for 2000 should be 1.535v
RTL use 57/58,60,61
My rig: [i7-990X ES w/AC MX-4 @ 4.5GHz by Prolima Super Mega / Fox x58 BloodRage P11 / Sapphire CFX HD 7970 OC
A-Data v2.0 2200MHz C8 / A-Data v2.0 1866MHz C8 / Dom.GT 2000C7GTF / Kingston 2000MHz D3T1K3/6GX (All IC Hypers)
Plextor M5S 128Gb Raid0 / WD 4x VelociRaptor 300Gb (10K) WD3000HLFS / Asus Xonar Essence STX / Seasonic 860 Platinum
Cooler Master Cosmos II UT w/10x Noctua P12 fans + 2x P14 FLX + 2x Scythe GT P-15 (1850) / BenQ XL2420T 24" 120Hz
S&S 6g, 7H, Sensei Rubber, 9HD, QcK / Tt Meka G1 / Logitech G5 v2 / Razer Destructor / Puretrak Talent / Senn HD598]
*My English
My DDR2 Results:
Cellshock GMH 8500 2GB-1508MHz 2.74v vldt
Cellshock GMH 8500 2GB-1398MHz 4-4-4-12 2.74v vldt
Cellshock GMH 8500 2GB-973MHz 3-2-2-1 2.74v vldt
Cellshock GMH 8500 2GB-1000MHz 3-4-3-5 3.25v SP1M
Mushkin XP 8500 GMH 2GB-1300MHz 2.45v vldt
OCZ Reaper 1200MHz PSC-1406MHz 2.28v vldt
Dominator 8500 GKX 2GB-840MHz 3-2-2-1 2.5v vldt
2000 7-9-7 with 1.56...
Can you please show a 32m spi run with same clocks but with 6-9-6?
24/7 Rig: AMD Athlon II 450 - MSI 760GM E51- 8GB 1600MHz Gskill RipjawsX- Nvidia GTX260 - OCZ Vertex2 60GB - Seagate 640GB - Antec Quattro 1200W - Samsung T220
Bench Rig: Intel Core i7 3770K - Asus Maximus IV Extreme - 4GB 2000MHz Corsair Dominator GT - 2x Nvidia GTX260 - Intel Postville 40GB - WD VelociRaptor 36GB - Antec Quattro 1200W
Bookmarks